1. Úvod
The WAC Lighting HR-LED90-27-WT Edge Lit LED Button Light is designed for versatile lighting applications, suitable for both recessed and surface-mounted installations. This fixture utilizes advanced LED technology to provide strong, evenly distributed light output. It is Energy Star and CEC Title 24 Rated, ensuring an eco-friendly and energy-efficient lighting solution. The system operates with Class II, 24V remote and plug-in transformers, allowing up to 20 button lights to be wired together for comprehensive lighting designs. This model features a white finish and a 2700K color temperature, delivering 200 lumens with a high CRI of 90 and an extended rated life of 100,000 hours.
Image 1.1: The WAC Lighting HR-LED90-27-WT Edge Lit LED Button Light, showcasing its compact, round design and white finish.
2. Bezpečnostní informace
Před instalací a použitím si pečlivě přečtěte všechny pokyny. Uschovejte si tento návod pro budoucí použití.
- VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení pojistkou nebo jističem.
- Instalaci musí provést kvalifikovaný elektrikář v souladu se všemi místními elektrotechnickými předpisy a vyhláškami.
- Zajistěte přívod objtage is correct (24V DC) for this fixture. Connecting to an incorrect voltage may damage the light and void the warranty.
- Do not modify the fixture or its components. Unauthorized modifications may lead to hazards and void the warranty.
- Avoid looking directly into the LED light source when illuminated, as it may cause eye strain.
- Tento výrobek je určen pouze pro vnitřní použití.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny a nepoškozené.
- WAC Lighting HR-LED90-27-WT Edge Lit LED Button Light
- Návod k použití (tento dokument)
Note: Class II, 24V remote and plug-in transformers are sold separately and are required for operation.
4. Nastavení a instalace
The HR-LED90-27-WT button light can be installed as either a recessed or surface-mounted fixture. Proper planning and adherence to electrical codes are essential.
4.1 Kroky před instalací
- Vypnout napájení: Locate the circuit breaker or fuse box and turn off the power supply to the area where the light will be installed.
- Připravte kabeláž: Ensure that a Class II, 24V DC power supply (transformer) is available and properly wired to the installation location. Up to 20 button lights can be connected to a single compatible transformer.
- Determine mounting type: Decide whether to recess the light into a surface (e.g., cabinet, ceiling) or surface mount it.
4.2 Zapuštěná instalace
- Cut opening: Using the provided dimensions (refer to Image 4.1), cut a circular opening in the desired surface. Ensure the opening is precise to allow for a snug fit.
- Připojte kabeláž: Carefully connect the fixture's wiring to the 24V DC power supply leads, observing proper polarity (positive to positive, negative to negative). Secure connections with appropriate wire connectors.
- Insert fixture: Gently push the button light into the prepared opening until it sits flush with the surface. The fixture is designed for a secure fit.
4.3 Instalace pro povrchovou montáž
- Secure mounting plate (if applicable): Some surface mount installations may require a separate mounting plate. Attach this plate to the surface using appropriate screws.
- Připojte kabeláž: Connect the fixture's wiring to the 24V DC power supply leads, ensuring correct polarity.
- Attach fixture: Secure the button light to the mounting surface or plate. The fixture may use a magnetic clasping mechanism for easy attachment.
Image 4.1: Dimensional drawing of the HR-LED90-27-WT button light, showing a 3.5-inch diameter and 9/16-inch depth for precise installation.
Obrázek 4.2: Příkladample of the WAC Lighting HR-LED90-27-WT button light installed as a recessed fixture in a cabinet, providing focused illumination.
5. Návod k obsluze
The WAC Lighting HR-LED90-27-WT is designed for simple operation, typically controlled via a remote control and compatible dimmer switch.
- Zapnutí/vypnutí: Once installed and connected to a 24V DC power supply, the light can be turned on or off using the connected remote control or wall switch.
- Stmívání: If connected to a compatible dimmer switch (e.g., a 0-10V dimmer), the brightness of the light can be adjusted to your desired level.
- Nastavení teploty barev: Some compatible systems or transformers may offer color temperature switching. The HR-LED90 series can be switchable between 2700K (Warm White) and 3500K, depending on the specific transformer and control method used. Refer to your transformer's manual for details on CCT adjustment.
Image 5.1: Illustration of a CCT (Correlated Color Temperature) switch, demonstrating the ability to select between different color temperatures like 2700K and 3500K, depending on the system configuration.
6. Údržba
The WAC Lighting HR-LED90-27-WT LED Button Light requires minimal maintenance due to its long-lasting LED components.
- Čištění: Pro čištění svítidla se ujistěte, že je vypnuté napájení. Použijte měkký, suchý nebo lehce navlhčený hadřík.amp hadříkem. Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani čisticí prostředky obsahující alkohol, protože by mohly poškodit povrchovou úpravu nebo optické součásti.
- Výměna součásti: LED světelný zdroj je integrovaný a nelze jej vyměnit uživatelem. Pokud světelný zdroj porouchá, je třeba vyměnit celé svítidlo.
- Inspekce: Periodically inspect the fixture and wiring for any signs of damage or wear. If any damage is observed, disconnect power and contact a qualified electrician or WAC Lighting support.
7. Řešení problémů
If you encounter issues with your HR-LED90-27-WT light, refer to the following common troubleshooting steps:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | No power supply; loose wiring; faulty transformer; faulty fixture. | Check circuit breaker/fuse. Ensure all wiring connections are secure. Test the 24V DC transformer. If issues persist, contact support. |
| Světlo nečekaně bliká nebo ztlumuje. | Incompatible dimmer; unstable power supply; loose wiring. | Ensure dimmer is compatible with LED fixtures. Check power supply stability. Verify wiring connections. |
| Světlo není tak jasné, jak se očekávalo. | Dimmer setting too low; incorrect power supply. | Adjust dimmer to maximum brightness. Verify the power supply is providing adequate voltage (24V DC). |
If these steps do not resolve the issue, please contact WAC Lighting customer support.
8. Specifikace
| Funkce | Detail |
|---|---|
| Číslo modelu | HR-LED90-27-WT |
| Značka | WAC osvětlení |
| Světelný zdroj | Integrovaná LED |
| Teplota barev | 2700K (teplá bílá) |
| Jas | 200 XNUMX lumenů |
| Index podání barev (CRI) | 90 |
| Rated Life | 100,000 hodiny |
| svtage | 24V DC (requires Class II transformer, sold separately) |
| Kontrolní metoda | Remote Control, Dimmer (compatible with 0-10V dimmers) |
| Materiál | Hliník, Sklo |
| Dokončit | Bílý |
| Rozměry (D x Š x V) | 3"L x 0.5"W x 0.5"H (Note: Product image shows 3.5" diameter, 9/16" depth) |
| Hmotnost položky | 0.22 libry |
| Typ montáže | Recessed Mount, Surface Mount |
| Certifikace | Energy Star, CEC Title 24, ADA, UL Listed |
| UPC | 790576345420 |
9. Záruka a podpora
9.1 Záruka výrobce
This WAC Lighting product is covered by a 1-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
9.2 Zákaznická podpora
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact WAC Lighting customer support directly. You can find contact information on the official WAC Lighting webwebu nebo prostřednictvím svého prodejce.
WAC Lighting Official Webmísto: www.waclighting.com
