WAC Lighting H-LED201-30-WT Summit ACLED Track Head Instruction Manual

Zavedení

This manual provides detailed instructions for the installation, operation, and maintenance of your WAC Lighting H-LED201-30-WT Contemporary Summit ACLED 15W Beamshift Line Voltage Cone H-Track Head. This track head is designed for use with 120V track systems and features Beamshift technology for adjustable beam angles.

Bezpečnostní informace

VAROVÁNÍ: Tento produkt obsahuje chemikálie, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné reprodukční poškození. Více informací naleznete na www.P65Warnings.ca.gov.

• Před instalací si pečlivě přečtěte všechny pokyny.
• Před instalací nebo servisem se ujistěte, že je jistič vypnutý.
• Pokud si nejste jisti, měl by instalaci provést kvalifikovaný elektrikář.
• This fixture is UL & CUL listed for dry locations. Do not use in wet or damp prostředí.
• Nepokoušejte se svítidlo upravovat. Jakékoli úpravy mohou vést ke ztrátě záruky a ohrožení bezpečnosti.

Obsah balení

• 1 x WAC Lighting H-LED201-30-WT Summit ACLED Track Head

Specifikace

Nastavení a instalace

This track head is designed for easy installation onto a 120V H-Track system. Ensure the track system is properly installed and powered off before proceeding.

Kroky instalace:

1. Vypnout napájení: Locate the circuit breaker controlling the track lighting system and turn off the power. Verify that the power is off before beginning installation.
2. Identify Track Type: Ensure your track system is an H-Track. This fixture is specifically designed for H-Track configurations.
3. Insert Track Head: Align the track head's adapter with the track slot. Push the adapter firmly into the track and rotate it 90 degrees to lock it into place. Ensure the electrical contacts are properly engaged with the track conductors.
4. Bezpečná pozice: Once inserted, slide the track head to the desired position along the track. Some track heads may have a locking mechanism (e.g., a screw) to secure their position; tighten if applicable.
5. Upravit směr: The track head can be swiveled and tilted to direct light as needed.
6. Obnovit napájení: Once the track head is securely installed and positioned, restore power at the circuit breaker.

Image: WAC Lighting H-LED201-30-WT Summit ACLED Track Head, showcasing its cone shape and white finish.

Image: Technical drawing illustrating the dimensions of the WAC Lighting H-LED201-30-WT track head, including its overall height of 6 3/4 inches, and cone dimensions.

Návod k obsluze

Beamshift Technology:

The Summit track head features Beamshift Technology, allowing you to modify the beam angle in the field without additional tools or accessories. This is achieved by changing the location of the lens within the fixture. The beam angle can be adjusted between 20 and 40 degrees to suit your lighting needs.

• To adjust the beam angle, gently rotate or slide the lens assembly within the fixture until the desired beam spread is achieved. Refer to the product's internal markings or visual cues for specific adjustment points.

Stmívání:

This fixture is designed for smooth and continuous dimming down to 10% when used with a compatible elektronický nízkoobjtage (ELV) dimmer. Ensure your dimmer switch is an ELV type for optimal performance.

• Operate the dimmer switch as you would any standard light switch to control the light output.

Údržba

The WAC Lighting Summit ACLED Track Head requires minimal maintenance.

• Čištění: Před čištěním se ujistěte, že je vypnuto napájení. Použijte měkký, suchý nebo lehce navlhčený hadřík.amp cloth to wipe the exterior of the fixture. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
• Životnost LED: The integrated LED module has a rated life of 50,000 hours and does not require lamp nahrazení.

Odstraňování problémů

If your track head is not functioning correctly, consider the following:

• Žádné světlo:
  • Zkontrolujte, zda je jistič zapnutý.
  • Ensure the track head is properly seated and making good electrical contact with the track.
  • Ověřte, zda je samotný kolejnicový systém napájen.
• Blikání nebo nekonzistentní stmívání:
  • Confirm that an electronic low voltage (ELV) dimmer is being used. Incompatible dimmers can cause performance issues.
  • Ujistěte se, že stmívač je dimenzován na celkový příkon.tage of all fixtures on the circuit.
• If issues persist after checking these points, contact customer support.

Informace o záruce

WAC Lighting provides a 5-letá záruka on this product. Additionally, a 2-letá záruka is provided specifically for the finish of the fixture. Please retain your proof of purchase for warranty claims.

Podpora

For further assistance, technical support, or warranty inquiries, please contact WAC Lighting customer service. Refer to the official WAC Lighting webstránky s aktuálními kontaktními informacemi.

WAC osvětlení Webmísto: www.waclighting.com