Performance Tool W2446 3D LED Firepoint Flashlight User Manual

Zavedení

Thank you for choosing the Performance Tool W2446 3D LED Firepoint Flashlight. This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your new flashlight. Designed for durability and versatility, this flashlight features a super bright Nichia LED, multiple output modes, and a robust aircraft-grade aluminum construction.

Obrázek 1: Performance Tool W2446 3D LED Firepoint Flashlight. This image shows the sleek black body of the flashlight with a textured grip section and a green ring near the LED head.

Důležité bezpečnostní informace

• Bezpečnost očí: Do not look directly into the LED light or shine it directly into the eyes of people or animals. The intense light can cause temporary vision impairment or permanent eye damage.
• Bezpečnost baterie:
  • Use only the specified battery type (3-D batteries).
  • Nekombinujte staré a nové baterie ani různé typy baterií.
  • Ensure correct battery polarity (+/-) when installing.
  • Pokud svítilnu nebudete delší dobu používat, vyjměte baterie, abyste zabránili jejich vytečení.
  • Použité baterie zlikvidujte zodpovědně v souladu s místními předpisy.
• Teplo: The flashlight head may become warm during prolonged use. This is normal. Avoid prolonged direct contact with hot surfaces.
• Děti: Uchovávejte mimo dosah dětí. To není hračka.
• Prostředí: Do not expose the flashlight to extreme temperatures, open flames, or immerse it in water unless specified as waterproof (this model is not specified as waterproof).

Obsah balení

Zkontrolujte prosím obsah balení, abyste se ujistili, že všechny položky jsou přítomny a v dobrém stavu.

• Performance Tool W2446 3D LED Firepoint Flashlight (x1)
• D-Cell Batteries (x3)

Obrázek 2: Packaging of the Performance Tool W2446 Flashlight. This image displays the retail packaging, highlighting features like 214 lumens, 3.5-hour run time, 5 modes, and "Batteries Included".

Nastavení: Instalace baterie

Your Performance Tool W2446 flashlight requires three (3) D-cell batteries for operation. Batteries are included in the package.

1. Odšroubujte zadní krytku: Hold the flashlight firmly and twist the tail cap (the end opposite the light head) counter-clockwise until it detaches.
2. Vložte baterie: Insert three D-cell batteries into the battery compartment, ensuring the positive (+) end of each battery faces towards the flashlight head. Follow the polarity markings inside the battery tube if available.
3. Replace Tail Cap: Carefully screw the tail cap back onto the flashlight body by twisting it clockwise until it is securely tightened. Do not overtighten.
4. Test: Press the power button to ensure the flashlight turns on.

Návod k obsluze

The Performance Tool W2446 flashlight features a single power button located on the side of the body, which controls both power and mode selection.

Zapnutí/vypnutí

• Zapnutí baterky ON, jednou stiskněte tlačítko napájení.
• Zapnutí baterky VYPNUTO, press and hold the power button for approximately 1-2 seconds, or cycle through all modes until the light turns off.

Výstupní režimy

The flashlight offers 5 distinct output modes. To cycle through these modes, quickly press the power button repeatedly while the flashlight is on.

1. Vysoký: Provides maximum brightness (200 lumens) for powerful illumination.
2. Střední: A balanced brightness level for general use, conserving battery life.
3. Nízký: Lowest brightness setting, ideal for close-up tasks or extended runtimes.
4. Strobe: A rapid flashing light, useful for signaling or disorienting.
5. SOS: Flashes the international Morse code signal for distress (three short, three long, three short flashes).

The flashlight will typically remember the last used mode when turned off and on again, but this may vary. If not, it will default to the first mode (High).

Údržba

• Čištění: Otřete tělo svítilny měkkým hadříkemamp tkanina. Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
• Výměna baterie: Replace batteries when the light dims significantly or fails to turn on. Refer to the "Setup: Battery Installation" section for instructions.
• Skladování: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period (more than a month), remove the batteries to prevent leakage and corrosion.
• LED: The Nichia LED is designed for long life and typically does not require replacement.

Odstraňování problémů

Specifikace

Záruka a podpora

For specific warranty information regarding your Performance Tool W2446 Flashlight, please refer to the documentation included with your purchase or visit the official Performance Tool webZáruční podmínky se mohou lišit.

If you encounter any issues not covered in the troubleshooting section or require further assistance, please contact Performance Tool customer support. Contact details are typically available on the product packaging or the manufacturer's official webmísto.

Můžete také navštívit Obchod s výkonnostním nářadím na Amazonu pro více informací o produktu a zdroje podpory.