Pritech CC-5001 Wireless Headset with FM Receiver 5-in-1 User Manual

Zavedení

This manual provides detailed instructions for the Pritech CC-5001 Wireless Headset with FM Receiver. Designed for versatile audio experiences, this 5-in-1 system offers wireless audio reception, FM radio functionality, wireless monitoring, and wireless chat capabilities. Please read this manual thoroughly before using the product to ensure proper operation and to maximize your listening experience.

Konec produktuview

Klíčové vlastnosti

• Wireless Audio Reception: Enjoy audio from various sources wirelessly.
• Integrated FM Radio: Tune into your favorite FM stations.
• Built-in Microphone: For communication and chat functions.
• Lightweight Design: Ensures comfort during extended use.
• Wireless Monitoring: Use the transmitter to monitor sounds from another room.
• Wireless Chat: Connect the transmitter to a PC for online communication.

Obsah balení

• Pritech CC-5001 Wireless Headset
• Wireless Transmitter/Base Station
• Charging and Audio Connection Cables (USB-A to DC, 3.5mm to 3.5mm, 3.5mm to RCA)

Identifikace součásti

Obrázek 1: Close-up of the Pritech CC-5001 headset earcup, showing the ON/OFF, SCAN, RESET, and Volume controls.

Obrázek 2: The Pritech CC-5001 wireless transmitter/base station, featuring audio input ports and power connection.

Nastavení

1. Nabíjení náhlavní soupravy

1. Connect the small end of the charging cable to the charging port on the headset.
2. Connect the USB-A end of the charging cable to a USB power adapter (not included) or a powered USB port.
3. Allow the headset to charge fully before first use. An indicator light (if present) will typically change color or turn off when charging is complete.

2. Připojení vysílače

The transmitter sends audio wirelessly to your headset. It requires power and an audio input source.

1. Připojení napájení: Connect the DC plug of the charging cable to the transmitter's power input. Connect the USB-A end to a USB power adapter or port.
2. Připojení zdroje zvuku:
   • For TV/PC (3.5mm audio out): Use the 3.5mm to 3.5mm audio cable. Connect one end to the transmitter's audio input and the other end to your TV's or PC's headphone/audio output jack.
   • For TV/Audio System (RCA audio out): Use the 3.5mm to RCA audio cable. Connect the 3.5mm end to the transmitter's audio input and the RCA plugs (red for right, white for left) to the corresponding audio output jacks on your TV or audio system.
3. Ensure the transmitter's power switch is in the 'ON' position.

Návod k obsluze

1. Zapnutí/vypnutí

• To power on the headset, slide the ON/OFF switch on the earcup to the 'ON' position.
• Chcete-li vypnout, posuňte ON/OFF přepněte do polohy „VYPNUTO“.

2. Ovládání hlasitosti

• Upravte hlasitost poslechu pomocí VOL+ a VOL- controls located on the headset earcup.

3. Using as a Wireless Headset (Audio Reception)

1. Ensure the transmitter is powered on and connected to an audio source.
2. Zapněte náhlavní soupravu.
3. The headset should automatically connect to the transmitter. If not, press the SKENOVAT button on the headset to search for the signal.
4. Nastavte hlasitost na požadovanou úroveň.

4. Používání FM rádia

1. Zapněte náhlavní soupravu.
2. Stiskněte tlačítko SKENOVAT button once to automatically scan and store available FM radio stations.
3. Po skenování použijte VOL+ a VOL- buttons (short press) to cycle through the stored stations. Long press for volume adjustment.

5. Wireless Monitoring

This function allows you to use the transmitter as a microphone to monitor sounds from another room.

1. Place the transmitter in the room you wish to monitor. Ensure it is powered on.
2. Zapněte náhlavní soupravu.
3. The headset will receive audio picked up by the transmitter's built-in microphone.
4. Upravte hlasitost sluchátek podle potřeby.

6. Wireless Chat (PC/Laptop)

Use the headset's microphone for online communication when the transmitter is connected to a computer.

1. Connect the transmitter's audio input to your PC's microphone input jack using the appropriate audio cable (e.g., 3.5mm to 3.5mm).
2. Ujistěte se, že je vysílač zapnutý.
3. Zapněte náhlavní soupravu.
4. In your PC's sound settings, select the transmitter as the input device.
5. The headset's microphone will now transmit your voice wirelessly to the PC via the transmitter.

Údržba

• Čištění: Use a soft, dry cloth to clean the headset and transmitter. Do not use abrasive cleaners or solvents.
• Skladování: Store the headset and transmitter in a cool, dry place away from direct sunlight and extreme temperatures.
• Péče o baterie: To prolong battery life, avoid fully discharging the headset frequently. Recharge regularly, even if not in use for extended periods.
• Vyhněte se vlhkosti: Udržujte zařízení mimo dosah vody a vysoké vlhkosti.

Odstraňování problémů

Specifikace

Záruka a podpora

Warranty information and customer support details for the Pritech CC-5001 Wireless Headset are typically provided with the product packaging or can be found on the official Pritech website. Please refer to these resources for specific warranty terms, service options, and contact information.