Králík W6310

Rabbit Automatic Electric Corkscrew Wine Bottle Opener - Model W6310 User Manual

Your guide to effortless wine opening.

Zavedení

Thank you for choosing the Rabbit Automatic Electric Corkscrew Wine Bottle Opener. This innovative device is designed to simplify the wine opening process, making it quick and effortless. Its sleek design and automatic operation ensure a smooth experience every time. This manual provides detailed instructions to help you get the most out of your new wine opener.

  • Works on both natural and synthetic corks.
  • Automatically removes and ejects corks without the need for buttons.
  • Features a built-in foil cutter for convenience.
  • Rechargeable via micro USB, with a single charge opening 30+ bottles.

Konec produktuview

The Rabbit Automatic Electric Corkscrew features a modern, ergonomic design that fits comfortably in your hand. Its compact form factor makes it easy to store and a stylish addition to any kitchen or bar.

Rabbit Automatic Electric Corkscrew in Metallic Red

The Rabbit Automatic Electric Corkscrew in Metallic Red, showcasinjeho elegantním a kompaktním designem.

Hand holding the Rabbit Automatic Electric Corkscrew above a wine bottle

A hand demonstrating the ergonomic grip of the corkscrew, positioned above a wine bottle.

Nastavení a nabíjení

Nabíjení zařízení

Before first use, fully charge your Rabbit Automatic Electric Corkscrew. A single charge can open over 30 bottles of wine.

  1. Remove the top cap of the corkscrew to reveal the micro-USB charging port.
  2. Connect the included micro-USB cable to the port and plug the other end into a compatible USB power adapter (not included) or a computer USB port.
  3. Kontrolka se během nabíjení rozsvítí a po plném nabití zhasne.
  4. Replace the top cap after charging.
Close-up of the Rabbit Automatic Electric Corkscrew showing the micro-USB charging port

The micro-USB charging port is conveniently located under the top cap.

Using the Built-in Foil Cutter

The top cap of your corkscrew doubles as a foil cutter, allowing you to easily remove the wine bottle's foil seal.

  1. Twist off the top cap from the corkscrew.
  2. Place the foil cutter (the cap) on top of the wine bottle, ensuring it covers the foil seal.
  3. Grip the bottle firmly and twist the foil cutter around the bottle neck to cut the foil.
  4. Remove the cut foil cap and discard it.
Hand using the Rabbit Automatic Electric Corkscrew's cap as a foil cutter on a wine bottle

The top cap of the corkscrew functions as a convenient foil cutter.

Návod k obsluze

The Rabbit Automatic Electric Corkscrew is designed for simple, one-touch operation. No buttons are required for cork removal.

  1. Ensure the foil has been completely removed from the wine bottle.
  2. Place the electric corkscrew vertically on top of the wine bottle, centering it over the cork.
  3. Apply gentle downward pressure. The corkscrew will automatically activate, inserting itself into the cork and then pulling it out of the bottle.
  4. Once the cork is fully removed from the bottle, lift the corkscrew away. The cork will automatically eject from the corkscrew.
Rabbit Automatic Electric Corkscrew removing a cork from a wine bottle

The corkscrew automatically engages and removes the cork with a simple press.

Péče a údržba

To ensure the longevity and optimal performance of your Rabbit Automatic Electric Corkscrew, follow these simple care instructions:

  • Čištění: Wipe the exterior of the corkscrew with a damp tkanina. Neponořujte zařízení do vody nebo jiných kapalin.
  • Skladování: Pokud vývrtku nepoužíváte, skladujte ji na suchém místě.
  • Nabíjení: Recharge the device when the performance starts to diminish, or periodically if not used frequently, to maintain battery health.

Odstraňování běžných problémů

If you encounter any problems with your Rabbit Automatic Electric Corkscrew, refer to the following solutions:

ProblémMožná příčinaŘešení
Corkscrew does not activate or stops during operation.Low battery or improper placement.Ensure the device is fully charged. Place the corkscrew firmly and vertically on the bottle.
Cork is not fully removed or gets stuck.Insufficient downward pressure or cork type.Apply consistent, gentle downward pressure. For very tight corks, ensure the device is fully charged for maximum power. If the cork is stuck in the mechanism, use the manual eject button (if available, under the top cap) or gently dislodge it.
Foil cutter does not cut cleanly.Insufficient pressure on the foil.Ensure the foil cutter is pressed firmly against the bottle neck while twisting.

Specifikace produktu

FunkceDetail
Číslo modeluW6310
MateriálPlast
BarvaKovová červená
Typ dokončeníVymalováno
Hmotnost položky9.92 unce
Rozměry produktu (D x Š)2"D x 2"Š
UPC022578105871
Zahrnuté komponentyAutomatic Electric Corkscrew Wine Bottle Opener

Záruka a zákaznická podpora

This product comes with a manufacturer's warranty. For specific details regarding warranty coverage, please refer to the warranty card included in your product packaging or visit the official Rabbit webmísto.

For any questions, technical assistance, or support, please contact Rabbit customer service through their official webnebo kontaktní informace poskytnuté při nákupu.

© 2026 Rabbit. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.