Arrow Fastener GT31LI

Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun Instruction Manual

Model: GT31LI | Brand: Arrow Fastener

1. Přesview

The Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun is designed for a variety of crafting, DIY, and repair projects. Featuring a lithium-ion battery, it provides up to 100 minutes of continuous use on a single charge. The glue gun heats up rapidly, typically within one minute, allowing for quick project starts. Its compact and lightweight design ensures ease of handling and portability.

Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun

Figure 1: The Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun, showcasing its compact design and red/black color scheme.

2. Bezpečnostní pokyny

  • Hot Nozzle: The nozzle and melted glue become very hot. Avoid direct contact with skin to prevent burns.
  • Větrání: Používejte lepicí pistoli v dobře větraném prostoru.
  • Skladování: Always place the glue gun on its integrated stand when not in use to prevent melted glue from dripping onto surfaces. Store in a cool, dry place away from children.
  • Automatické vypnutí: The glue gun features an automatic shut-off after five minutes of inactivity to enhance safety and conserve battery life.
  • Nabíjení: Charge the device only with a 5V output adapter using the provided USB cable. Using an incorrect adapter may cause charging failure.
  • Lepicí tyčinky: Use only 5/16-inch diameter mini glue sticks. Incorrect sizes may cause feeding issues or damage to the gun.
  • Děti: Keep out of reach of children. Adult supervision is required if children are using the tool.

3. Zahrnuté komponenty

  • Arrow GT31LI 30-Watt Cordless Hot Melt Mini Glue Gun
  • Lithium-Ion Battery (integrated)
  • USB nabíjecí kabel
  • Mini Glue Sticks (quantity may vary, typically 24 included)

4. Nastavení

  1. Počáteční poplatek: Before first use, fully charge the glue gun's integrated lithium-ion battery using the provided USB charging cable and a compatible 5V output adapter. The charging indicator light will show charging status.
  2. Vložte tyčinku lepidla: Insert a 5/16-inch diameter mini glue stick into the loading chamber at the rear of the glue gun. Push it gently until it stops.

5. Návod k obsluze

  1. Zapnutí: Press and hold the power button (usually located near the handle) for a few seconds until the indicator light illuminates.
  2. Topení: The glue gun will begin to heat up. The indicator light may change color or blink to show it's heating. It typically reaches operating temperature within one minute.
  3. Nanášení lepidla: Once the glue gun is heated and the indicator light signals readiness (e.g., solid green), gently squeeze the trigger to dispense melted glue. Apply glue to the desired surface.
  4. Automatické vypnutí: If the glue gun is left idle for approximately five minutes, it will automatically power off to prevent overheating and save battery. To resume operation, simply press the power button again.
  5. Vypnout: To manually turn off the glue gun, press and hold the power button until the indicator light turns off.

6. Údržba

  • Čištění: Ensure the glue gun is completely cool before cleaning. Gently wipe the exterior with a damp cloth. Do not use abrasive cleaners or immerse the gun in water.
  • Péče o trysku: Do not attempt to clean the nozzle while the gun is hot. Any hardened glue around the nozzle can usually be carefully removed once the gun is cool.
  • Skladování: Store the glue gun in a clean, dry place. Ensure no glue stick is left partially melted in the chamber during long-term storage.

7. Řešení problémů

ProblémMožná příčinaŘešení
Lepicí pistole se nezahřívá.Baterie je slabá nebo vybitá.Charge the battery fully using the provided USB cable and a 5V adapter.
Glue is not dispensing.Glue stick is not fully inserted or is the wrong size.Ensure a 5/16-inch glue stick is fully inserted. Allow adequate heating time.
Glue gun shuts off unexpectedly.Auto shut-off feature activated due to inactivity.Press the power button to turn it back on.

8. Specifikace

  • Model: GT31LI
  • Značka: Šípový uzávěr
  • Wattage: 30 wattů
  • Baterie: 1 Lithium Ion (součástí balení)
  • Životnost baterie: Až 100 minut na jedno nabití
  • Doba zahřívání: 1 minutu nebo méně
  • Průměr lepicí tyčinky: 5/16 palce
  • Barva: Červený
  • Materiál: Plast
  • Hmotnost položky: 11.6 unce
  • Kompatibilní materiály: Cardboard, Cotton, Fabric, Leather, Plastic
  • Zahrnuté komponenty: Glue gun, USB charging cable

9. Záruka a podpora

For warranty information or technical support, please refer to the documentation included with your product or visit the official Arrow Fastener webmísto. Uschovejte si doklad o koupi pro případ záručních reklamací.

© 2026 Arrow Fastener. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.