Feit Electric 917972
Feit 917972 Electric LED Utility Shop Light User Manual
Model: 917972 | Brand: Feit Electric
1. Úvod
This user manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric LED Utility Shop Light, model 917972. This versatile LED shop light is designed to provide bright, efficient illumination for various indoor spaces such as garages, basements, game rooms, utility rooms, workshops, cabinets, closets, and attics.
Figure 1: Feit Electric LED Utility Shop Light (Model 917972) packaging, highlighting its features and design.
2. Bezpečnostní informace
Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in electric shock, fire, or other injuries.
- Před instalací nebo servisem vždy odpojte napájení.
- Do not install near heat sources or in wet locations. This product is designed for indoor use only.
- Ujistěte se, že montážní plocha unese hmotnost svítidla.
- Nedívejte se přímo do LED světelného zdroje, když je rozsvícený.
- Use only with 120V AC power supply.
- Pokud dojde k poškození vnějšího flexibilního kabelu nebo kabelu tohoto svítidla, musí jej vyměnit výhradně výrobce nebo jeho servisní zástupce nebo podobně kvalifikovaná osoba, aby se předešlo nebezpečí.
3. Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- Feit Electric LED Utility Shop Light Fixture (Model 917972)
- Two (2) 6-inch (15 cm) Hanging Cables
- Two (2) Mounting Screws for flush mount installation
4. Nastavení a instalace
The Feit Electric LED Utility Shop Light offers two primary installation methods: hanging and flush mount.
4.1. Hanging Installation
- Identify the desired location for the shop light. Ensure it is near a power outlet.
- Attach the two 6-inch (15 cm) hanging cables to the designated slots on the top of the shop light fixture.
- Securely attach the other end of the hanging cables to a sturdy overhead structure (e.g., ceiling joists, chains, or hooks) using appropriate hardware (not included, unless specified in package contents). Ensure the fixture is level and stable.
- Plug the power cord into a standard 120V AC grounded outlet.
4.2. Flush Mount Installation
- Determine the exact mounting points on the ceiling or wall where the fixture will be installed. Mark these points accurately, ensuring they align with the mounting holes on the fixture.
- Drill pilot holes at the marked locations, if necessary, suitable for the provided mounting screws.
- Align the fixture's mounting holes with the pilot holes.
- Insert and tighten the two mounting screws to secure the fixture firmly against the surface. Do not overtighten.
- Plug the power cord into a standard 120V AC grounded outlet.
5. Návod k obsluze
The Feit Electric LED Utility Shop Light is designed for simple operation.
- Once properly installed and plugged into a live 120V AC outlet, the light will illuminate instantly.
- To turn the light ON/OFF, use the wall switch connected to the outlet, or unplug the fixture from the outlet. Note: This fixture does not include an integrated ON/OFF switch or pull chain.
- The LED technology provides instant full brightness with no humming.
6. Údržba
The Feit Electric LED Utility Shop Light requires minimal maintenance.
- Čištění: Ensure the fixture is unplugged and cool before cleaning. Wipe the exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- LED diody: The integrated LED lights are designed for long life and are not replaceable. Do not attempt to open the fixture or replace the LEDs.
- Inspekce: Periodically inspect the power cord and connections for any signs of damage. If damage is found, discontinue use and contact customer support.
7. Řešení problémů
If you experience issues with your shop light, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Světlo se nerozsvítí. | No power to the outlet; fixture not properly plugged in; faulty outlet or wall switch. | Check if the outlet has power (test with another device). Ensure the plug is fully inserted. Check the circuit breaker. Verify the wall switch is ON. |
| Světlo bliká nebo ztmavne. | Loose connection; incompatible dimmer switch (this fixture is not dimmable); voltage výkyvy. | Ensure the plug is secure. Do not use with a dimmer switch. If flickering persists, consult an electrician. |
| Bzučivý hluk. | Not applicable for this LED fixture. | This LED fixture is designed for no humming. If humming occurs, discontinue use and contact customer support. |
If the problem persists after trying these solutions, please contact Feit Electric customer support.
8. Specifikace
| Funkce | Detail |
|---|---|
| Značka | Feit Electric |
| Číslo modelu | 917972 |
| Typ světelného zdroje | LED |
| Teplota barev | 4100 Kelvinů (studená bílá) |
| Wattage | 38 wattů |
| Světelný výkon | 3700 XNUMX lumenů |
| Životní hodiny | 50,000 hodiny |
| svtage | 120 voltů (AC) |
| Materiál | Copper, Metal (Fixture) |
| Rozměry produktu | 47 x 6 x 3 palce |
| Hmotnost položky | 2.1 libry |
| Vnitřní/venkovní použití | Krytý |
| Typ instalace | Flush Mount, Hanging |
9. Záruka a podpora
Feit Electric products are designed for durability and performance. This product is warrantied for five years from the date of purchase against defects in workmanship and materials. For warranty claims or technical support, please contact Feit Electric customer service.
Feit Electric Customer Service:
- Webmísto: www.feit.com
- Telefon: Refer to the official Feit Electric webstránky s aktuálními kontaktními čísly.
Uschovejte si prosím účtenku jako doklad o koupi pro účely záruky.