WAC Lighting HR-LED87-27-DB Round LED Button Light Instruction Manual

1. Přesview

The WAC Lighting HR-LED87-27-DB is a versatile round LED button light designed for both recessed and surface-mounted installations. It features a low profile and shallow installation depth, making it suitable for various applications such as under cabinets, shelves, curios, and displays. This light operates on 24V and provides 2700K soft white illumination.

Image: The WAC Lighting HR-LED87-27-DB Round LED Button Light in Dark Bronze finish.

Klíčové vlastnosti:

• All steel construction, suitable for recessed or surface mounting.
• Nízký profile and shallow installation depth for discreet integration.
• Smooth and continuous dimming to 15% using an Electronic Low Voltage (ELV) dimmer.
• Includes 72-inch wires and a cutout template for recessed installations.
• Requires a Class 2 power supply (sold separately).
• 4.8W high-powered LED, 2700K color temperature, 180 lumens, G4 base, with a 70,000-hour rated life.
• UL & cUL listed for damp umístění.

2. Bezpečnostní informace

Před zahájením instalace si prosím přečtěte a pochopte všechny pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo jiným nebezpečím.

• Před instalací, servisem nebo čištěním vždy odpojte napájení v jističi nebo v pojistkové skříni.
• Instalaci musí provést kvalifikovaný elektrikář v souladu se všemi platnými národními a místními elektrotechnickými předpisy.
• Ensure the product is used with a compatible Class 2, 24V power supply as specified in this manual. Using an incompatible power supply may damage the fixture and void the warranty.
• Do not modify the product in any way; doing so voids the warranty and may pose safety risks.
• Toto svítidlo je vhodné pro damp locations but should not be exposed to direct water spray or submersion.
• Nedívejte se přímo do LED světelného zdroje, když je rozsvícený.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• 1 x HR-LED87-27-DB LED Button Light
• Mounting Hardware (for recessed and surface mounting)
• 72-inch Wires
• Cutout Template (for recessed installations)

4. Nastavení a instalace

4.1 Než začnete

Ensure power is disconnected at the circuit breaker. Review all instructions and gather necessary tools (e.g., screwdriver, wire strippers, drill, hole saw for recessed installation).

4.2 Požadavky na napájecí zdroj

This LED button light requires a Class 2, 24V remote or plug-in transformer (not included). Compatible models include: EN-2460-RB2, EN-24100-RB2, EN-2460-P-AR, EN-24100-277-RB2-T. Up to 20 button lights can be wired in series to one power supply, depending on the power supply's maximum load. Refer to the power supply's instructions for specific wiring details.

Image: Compatible Class 2 enclosed electronic transformers and general wiring guidelines. Note the input, output, minimum load, and maximum fixture run for each model.

4.3 Možnosti montáže

The HR-LED87-27-DB can be installed as either a recessed or surface-mounted fixture. The necessary hardware for both options is included.

Image: The WAC Lighting HR-LED87-27-DB LED button light shown in a recessed mounted configuration.

Image: Diagram illustrating the dimensions for both surface mount (2-1/4 inches diameter, 7/8 inches height) and recessed mount (2-1/4 inches diameter, 5/8 inches visible height, 1-7/8 inches depth) installations.

4.3.1 Zapuštěná instalace

1. Use the provided cutout template to mark the desired location. Ensure adequate clearance behind the mounting surface for the fixture's depth (approximately 1-7/8 inches).
2. Cut a hole of the specified diameter (refer to the dimensions diagram) using an appropriate hole saw or tool.
3. Connect the light's 72-inch wires to the Class 2 power supply wiring. Observe proper polarity (typically red to positive, black to negative).
4. Gently push the light into the cutout until the spring clips engage and secure it in place.

4.3.2 Instalace na povrch

1. Označte požadované místo montáže.
2. Secure the provided mounting hardware (e.g., screws) to the surface, ensuring it aligns with the light fixture's mounting points.
3. Connect the light's 72-inch wires to the Class 2 power supply wiring. Observe proper polarity.
4. Attach the light fixture to the mounting hardware, ensuring it is securely fastened.

4.4 Wiring Multiple Lights

Multiple button lights can be wired in series. Ensure the total wattage of all connected lights does not exceed the maximum load of the Class 2 power supply. Secondary wiring for Class 2 transformers does not require conduit; however, non-metallic sheathed cable may be used for secondary wiring in walls and ceilings in accordance with local codes.

5. Návod k obsluze

5.1 Zapnutí/vypnutí

Once installed and connected to a compatible power supply, the light can be controlled via the connected wall switch or dimmer.

5.2 Funkce stmívání

This fixture supports smooth and continuous dimming down to 15% when used with an Electronic Low Voltage (ELV) dimmer. Ensure your dimmer is specifically rated for ELV LED loads to ensure optimal performance and prevent flickering or damage.

6. Péče a údržba

To maintain the appearance and performance of your LED button light, follow these simple guidelines:

• Před čištěním se ujistěte, že je svítidlo vypnuto jističem.
• Otřete svítidlo měkkým, suchým nebo lehce navlhčeným hadříkem.amp tkanina.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electrical components.
• LED světelný zdroj je integrovaný a nelze jej vyměnit uživatelem.

7. Řešení problémů

If you experience issues with your LED button light, refer to the table below for common problems and solutions:

If the problem persists after attempting these solutions, please contact WAC Lighting customer support.

8. Specifikace produktu

9. Informace o záruce

This WAC Lighting product is covered by a 5-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. For complete details on warranty terms, conditions, and limitations, please refer to the official WAC Lighting webwebu nebo kontaktujte jejich oddělení zákaznické podpory.

10. Zákaznická podpora

For further assistance, technical support, or to inquire about replacement parts, please visit the official WAC Lighting webnebo kontaktujte jejich oddělení zákaznických služeb.

WAC Lighting Store: Navštivte obchod