WAC Lighting QP-LED903-DB 900 Series LED Socket Set Instruction Manual

1. Úvod a produktview

This manual provides essential instructions for the safe and efficient use of the WAC Lighting QP-LED903-DB 900 Series LED Socket Set. This LED socket set is designed for indoor use and features energy-efficient LED technology.

Key features include a collar with a threaded set screw for adjusting lamp positions within a shade, smooth and continuous ELV dimming capabilities, and a long rated life. The system operates at 12 Volts and provides 450 lumens with a color temperature of 3000 Kelvin and a CRI of 82.

Obrázek 1: Přesview of the WAC Lighting QP-LED903-DB LED Socket Set.

2. Bezpečnostní informace

VAROVÁNÍ: This product may contain chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Always check local laws and regulations before installation and use.

• Always disconnect power at the circuit breaker before installation, removal, or servicing.
• Instalaci by měl provést kvalifikovaný elektrikář v souladu se všemi platnými elektrotechnickými předpisy.
• Do not rest glass components directly on the socket base.
• Ensure the product is used only in dry, indoor locations.
• Do not modify the product in any way; unauthorized modifications may void the warranty and create safety hazards.
• Tento produkt má certifikaci UL, což znamená splnění bezpečnostních norem.

3. Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• WAC Lighting QP-LED903-DB 900 Series LED Socket Set (1 unit)
• Návod k obsluze (1 kus)
• Collar with threaded set screw

Poznámka: The package dimensions are approximately 5.62 inches (length) x 4.255 inches (width) x 2.765 inches (height).

4. Nastavení a instalace

This LED socket set is designed for protruding mounting and requires a 12 Volt corded electric power source with a US-style plug format (Type A).

1. Odpojení napájení: Before starting, ensure the power supply to the installation area is completely disconnected at the main circuit breaker.
2. Montáž: Securely mount the socket set using appropriate hardware for a protruding installation. Ensure the mounting surface is stable and can support the fixture's weight.
3. Zapojení: Connect the 12 Volt corded electric power source to the socket set. Follow all local electrical codes and the wiring diagrams provided with your specific fixture (if applicable).
4. Lamp Nastavení polohy: The included collar with a threaded set screw allows for varying lamp positions inside the shade. Adjust the collar to achieve the desired lamp depth and secure it by tightening the set screw.
5. Glass Placement: If your fixture includes glass components, ensure they are installed correctly and do not rest directly on the socket base.
6. Obnovení napájení: Jakmile je instalace dokončena a všechna připojení jsou bezpečná, obnovte napájení jističem.

Figure 2: Detail of the LED socket set, showing the collar for lamp position adjustment.

5. Návod k obsluze

The WAC Lighting QP-LED903-DB LED Socket Set is designed for straightforward operation.

• Zapnutí/vypnutí: Control the light using the wall switch connected to the fixture.
• Stmívání: This socket set supports smooth and continuous ELV (Electronic Low Voltage) dimming. Use a compatible ELV dimmer switch for dimming functionality.
• Energetická účinnost: The integrated LED technology ensures energy-efficient operation with no projected UV or IR radiation.

6. Údržba

The WAC Lighting QP-LED903-DB LED Socket Set is designed for long-term, low-maintenance operation.

• Čištění: To clean the socket set, ensure power is off. Use a soft, dry, or slightly damp cloth. Avoid abrasive cleaners, solvents, or any cleaning agents that could damage the finish or electrical components.
• Životnost LED: The integrated LED has a rated life of 50,000 hours (estimated life of 30,000 hours), meaning no bulb replacement is typically required for the life of the product under normal operating conditions.
• Inspekce: Periodically inspect the wiring and connections for any signs of wear or damage. If any issues are found, disconnect power immediately and consult a qualified electrician.

7. Řešení problémů

If you encounter issues with your LED socket set, refer to the following common troubleshooting steps:

• Světlo se nerozsvítí:
  • Zkontrolujte jistič, abyste se ujistili, že je do svítidla přivedeno napájení.
  • Ověřte, zda je nástěnný vypínač v poloze „ZAPNUTO“.
  • Ujistěte se, že všechny kabelové spoje jsou bezpečné.
• Problémy se stmíváním:
  • Confirm that a compatible ELV dimmer switch is being used.
  • Check the dimmer switch wiring.
• Blikající světlo:
  • Ujistěte se, že jsou všechny spoje pevně utažené.
  • Ověřte, zda je napájení stabilní.
  • If using a dimmer, ensure it is compatible and properly installed.

Pokud problémy přetrvávají i po vyzkoušení těchto kroků, kontaktujte zákaznickou podporu.

8. Specifikace

9. Informace o záruce

The WAC Lighting QP-LED903-DB 900 Series LED Socket Set comes with a 5-letá záruka od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání. Uschovejte si prosím doklad o koupi pro případ uplatnění záruky.

For detailed warranty terms and conditions, please refer to the official WAC Lighting warranty policy or contact customer support.

10. Zákaznická podpora

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact WAC Lighting customer support.

Výrobce: WAC osvětlení

Please visit the official WAC Lighting webstránky s kontaktními informacemi a dalšími zdroji.