Prime TNOREM02

Venkovní dálkové ovládání Prime TNOREM02 se 2 zásuvkami a bezdrátovým vysílačem - uživatelská příručka

Model: TNOREM02

Zavedení

The Prime TNOREM02 is an outdoor remote control system designed to provide convenient wireless operation for two grounded electrical devices. It includes a receiver unit with two 3-prong grounded outlets and a wireless transmitter (remote control) for switching connected devices on and off from a distance. This manual provides essential information for the safe and effective use of your Prime TNOREM02.

Prime TNOREM02 Outdoor Remote Control with Receiver and Transmitter

Image: The Prime TNOREM02 outdoor remote control system, showing the receiver unit with its power cord and the compact wireless transmitter.

Bezpečnostní informace

Před použitím tohoto výrobku si prosím přečtěte a pochopte všechny bezpečnostní pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo vážnému zranění.

  • Pouze pro venkovní použití: This product is designed for outdoor use. Ensure all connections are protected from direct exposure to water.
  • Základy: The receiver unit features two 3-prong grounded outlets and a grounded plug. Always connect to a properly grounded outdoor receptacle.
  • Elektrické hodnocení: Nepřekračujte maximální elektrický výkon 15 Amps, 1875 Watts, 125 Volts, or 1/3 Horsepower. Overloading can cause overheating and fire.
  • Ochrana vody: While designed for outdoor use, avoid submerging the unit in water. Ensure the outlets are facing downwards when installed to prevent water accumulation.
  • Vedení kabelu: Route cords to prevent tripping hazards and protect them from damage.
  • Návrh 65 Varování: Tento produkt může obsahovat chemikálie, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiná poškození reprodukce. Po manipulaci si umyjte ruce.
  • Bezpečnost baterie: The remote control uses a CR2032 3V button-cell battery. Keep batteries out of reach of children. If swallowed, seek immediate medical attention.

Obsah balení

Ověřte, zda jsou v balení přítomny všechny položky:

  • 1 x Prime TNOREM02 2-Outlet Outdoor Remote Control Receiver
  • 1 x Wireless Transmitter (Remote Control)
  • 1 x CR2032 3V Button-Cell Battery (pre-installed in transmitter)
Prime TNOREM02 Product Packaging

Image: The Prime TNOREM02 product packaging, showing the receiver and remote control clearly visible through the clear plastic.

Vlastnosti produktu

  • Dvojitě uzemněné zásuvky: Two 3-prong grounded outlets for connecting multiple devices.
  • Bezdrátový provoz: Control devices from up to 80 feet away using the included transmitter.
  • Venkovní hodnocení: Durable construction suitable for outdoor environments.
  • "Reversed" Ground-Pin: Patented design allows for use with right-angle and larger transformer plugs without blocking the second outlet.
  • Simple On/Off Control: Easy-to-use 2-button remote for instant power control.
  • Baterie v ceně: Transmitter comes with a replaceable CR2032 3V button-cell battery.
Close-up of Prime TNOREM02 Receiver Outlets

Obrázek: Detailní záběr view of the Prime TNOREM02 receiver unit, highlighting the two 3-prong grounded outlets.

Nastavení

  1. Vyberte umístění: Choose a suitable outdoor location for the receiver unit. Ensure it is protected from direct heavy rain and positioned where its outlets face downwards.
  2. Zapojte přijímač: Connect the receiver unit's grounded plug into a standard 3-prong outdoor electrical outlet.
  3. Připojit zařízení: Plug the devices you wish to control into the two grounded outlets on the receiver unit. Ensure the total wattage of connected devices does not exceed 1875 Watts.
  4. Příprava vysílače: The CR2032 3V button-cell battery is pre-installed in the wireless transmitter. If the remote does not respond, check the battery.
Prime TNOREM02 Outdoor Remote Control in Use

Image: The Prime TNOREM02 receiver unit installed outdoors, connected to two green extension cords, with a hand holding the remote control to operate connected lights.

Návod k obsluze

Using the Prime TNOREM02 is straightforward:

  • Zapnout: Stiskněte tlačítko ON button on the wireless transmitter. The indicator light on the receiver unit should illuminate, and connected devices will receive power.
  • Vypnout: Stiskněte tlačítko VYPNUTO button on the wireless transmitter. The indicator light on the receiver unit should turn off, and connected devices will lose power.
  • Rozsah: The wireless transmitter has an operating range of up to 80 feet. Obstructions such as walls or dense foliage may reduce this range.

Údržba

The Prime TNOREM02 requires minimal maintenance. The primary maintenance task is replacing the battery in the wireless transmitter.

Replacing the Transmitter Battery:

  1. Locate the battery compartment on the back of the wireless transmitter.
  2. Using a small screwdriver or coin, carefully open the battery compartment cover.
  3. Remove the old CR2032 3V button-cell battery.
  4. Insert a new CR2032 3V button-cell battery with the positive (+) side facing up.
  5. Bezpečně nasaďte kryt prostoru pro baterie.
  6. Test the remote control to ensure it is functioning correctly.

Periodically inspect the receiver unit and its cords for any signs of damage, wear, or corrosion. Discontinue use if any damage is observed.

Odstraňování problémů

ProblémMožná příčinaŘešení
Zařízení se nezapínají/nevypínají.
  • Transmitter battery is dead or incorrectly installed.
  • Receiver is not plugged in or not receiving power.
  • Devices plugged into receiver are not switched ON or are faulty.
  • Receiver is out of range of the transmitter.
  • Spuštěna ochrana proti přetížení.
  • Replace the CR2032 battery in the transmitter, ensuring correct polarity.
  • Verify the receiver is securely plugged into a working outdoor outlet.
  • Ensure connected devices are in the ON position (if applicable) and functional.
  • Move closer to the receiver unit. Reduce obstructions between the transmitter and receiver.
  • Unplug devices, wait a few minutes, then plug them back in. Reduce the total load.
Reduced wireless range.
  • Překážky mezi vysílačem a přijímačem.
  • Slabá baterie vysílače.
  • Rušení od jiných bezdrátových zařízení.
  • Přemístěte přijímač nebo vysílač, abyste minimalizovali překážky.
  • Vyměňte baterii vysílače.
  • Move the unit away from other strong wireless signals.
Unit stopped working after a period of use.
  • Porucha vnitřní součásti.
  • Exposure to extreme weather conditions (e.g., direct lightning strike).
  • Overload damage.
  • If basic troubleshooting fails, the unit may require replacement.
  • Ensure the unit is installed in a location that offers reasonable protection from severe weather.
  • Verify connected devices do not exceed the maximum electrical rating.

Specifikace

FunkceDetail
Číslo modeluTNOREM02
ZnačkaPrimární
Počet vývodů2 (3-prong grounded)
Typ drátuSJTW 14/3 Gauge
Typ zástrčkyRight Angle, Grounded
PoužíváníVenkovní
Max wattů1875 wattů
Max Amps15 Amps
Max voltů125 voltů
Maximální výkon v koňských silách1 / 3 HP
Bezdrátové DosahAž 80 stop
Baterie vysílačeCR2032 3V Button-Cell
Rozměry produktu8 x 6.2 x 2.1 palce (přibližně)
Hmotnost položky0.01 ounces (for remote control)
Technologie připojeníBluetooth
CertifikaceNot explicitly detailed, but designed for outdoor electrical use.

Záruka a podpora

Specific warranty information for the Prime TNOREM02 is not provided in the available product details. For warranty claims or technical support, please contact Prime customer service directly. Retain your proof of purchase for any warranty inquiries.

For further assistance, refer to the official Prime webwebu nebo kontaktujte jejich zákaznickou podporu.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.