HOTONE TANLA1

Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Hlavní uživatelská příručka

Model: TANLA1 | Brand: HOTONE

1. Úvod

The Hotone Nano Legacy British Invasion is a compact 5-watt guitar amplifier head designed to deliver classic British amplifier tones. This manual provides essential information for the safe and effective use of your amplifier. Please read it thoroughly before operation.

Klíčové vlastnosti:

  • Ultra-compact, portable amphlava lifikátoru.
  • Inspired by the legendary Vox AC30 amplifier tone.
  • Separate Volume and Gain control knobs.
  • 3-pásmový ekvalizér (basy, středy, výšky) pro tvarování tónu.
  • Integrated FX Loop for external effects integration.

2. Bezpečnostní pokyny

  • Napájení: Use only the specified 18V DC power adapter (center negative). Incorrect voltagmůže poškodit jednotku.
  • Větrání: Zajistěte dostatečné větrání. Neblokujte větrací otvory.
  • vlhkost: Chraňte jednotku před vodou nebo nadměrnou vlhkostí.
  • Teplo: Neumisťujte jednotku do blízkosti zdrojů tepla nebo na přímé sluneční světlo.
  • Čištění: Čistěte pouze suchým hadříkem.
  • Servis: Nepokoušejte se opravovat tento přístroj sami. Veškerý servis svěřte kvalifikovanému personálu.

3. Konec produktuview

Hotone Nano Legacy British Invasion Amplifier Head

Obraz: The Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Head, showcasing its compact size and overall design.

Ovládací prvky na předním panelu:

Hotone Nano Legacy British Invasion Front Panel Diagram

Obraz: Front panel of the Hotone Nano Legacy British Invasion amplifier head, showing input jack, EQ knobs (Bass, Middle, Treble), Gain, Volume, and Power switch. Each control is numbered and labeled for easy identification.

  1. VSTUP: 1/4" mono jack pro připojení kytary.
  2. BAS: Controls the low frequency response of your tone.
  3. STŘEDNÍ: Controls the mid frequency response of your tone.
  4. ZTROJNÁSOBIT: Controls the high frequency response of your tone.
  5. ZÍSKAT: Controls the pre-amp gain level, affecting distortion and sustain.
  6. HLASITOST: Ovládá celkovou výstupní hlasitost ampživější.
  7. Přepínač ON/OFF: Zapíná nebo vypíná jednotku.

Připojení zadního panelu:

Hotone Nano Legacy British Invasion Rear Panel Diagram

Obraz: Rear panel of the Hotone Nano Legacy British Invasion amplifier head, showing power input, Phones/Line Output, AUX In, FX Loop Send/Return, and Speaker Output. Each connection point is numbered and labeled.

  1. 18V DC: Power input for the included 18V DC adapter (center negative).
  2. TELEFONNÍ/LINEKOVÝ VÝSTUP: 1/8" stereo jack for headphones or direct recording.
  3. AUX IN: 1/8" stereo jack for connecting an external audio player (e.g., smartphone, MP3 player) to play along with.
  4. NÁVRAT FX SMYČKY: 1/4" mono jack to connect the output of your effects pedal to the amplifier's power section.
  5. REPRODUKTOROVÝ VÝSTUP: 1/4" mono jack for connecting to a speaker cabinet (4-16Ω impedance).
  6. FX LOOP SEND: 1/4" mono jack to send the pre-amp signal to your effects pedal's input.

4. Nastavení a připojení

  1. Připojení napájení: Connect the supplied 18V DC power adapter to the "18V DC" input on the rear panel. Plug the adapter into a suitable power outlet.
  2. Připojení kytary: Plug your guitar into the "INPUT" jack on the front panel using a standard 1/4" instrument cable.
  3. Připojení reproduktorů: Connect the "SPEAKER OUTPUT" on the rear panel to your speaker cabinet using a speaker cable. Ensure your speaker cabinet has an impedance between 4 and 16 ohms. Varování: Neobsluhujte amplifier without a speaker connected to the SPEAKER OUTPUT, as this can damage the unit.
  4. Headphones/Line Out (Optional): For silent practice or direct recording, connect headphones or a recording interface to the "PHONES/LINE OUTPUT" jack. This will mute the speaker output.
  5. AUX vstup (volitelný): To play along with backing tracks, connect your external audio device (e.g., smartphone, MP3 player) to the "AUX IN" jack using a 1/8" stereo cable.
  6. FX Loop (Optional): To integrate external effects pedals, connect the "FX LOOP SEND" to the input of your effects pedal and the output of your effects pedal to the "FX LOOP RETURN".

5. Návod k obsluze

  1. Zapnutí: Ensure all connections are secure, then flip the "ON/OFF" switch to the ON position. The power indicator light will illuminate.
  2. Počáteční nastavení: Start with the "VOLUME" and "GAIN" knobs set to their minimum positions (fully counter-clockwise). Set the "BASS", "MIDDLE", and "TREBLE" knobs to the 12 o'clock position (neutral).
  3. Úprava zisku: Slowly increase the "GAIN" knob to achieve your desired level of overdrive or distortion. Higher gain settings will produce more saturated tones.
  4. Nastavení hlasitosti: Once your gain is set, slowly increase the "VOLUME" knob to reach your desired listening level.
  5. Tvarování tónu pomocí ekvalizéru:
    • BAS: Adjust for low-end warmth and fullness.
    • STŘEDNÍ: Adjust for presence and cut in the mix. Lowering mids can create a "scooped" sound, while boosting them can make your guitar stand out.
    • ZTROJNÁSOBIT: Adjust for brightness and clarity.
  6. Vypnout: Before disconnecting any cables or the power supply, turn the "VOLUME" knob down and then flip the "ON/OFF" switch to the OFF position.

6. Údržba

  • Čištění: K čištění vnějších částí používejte měkký, suchý hadřík amplifier. Do not use liquid cleaners, aerosols, or solvents.
  • Skladování: Uložte ampUchovávejte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
  • Přeprava: Při přepravě se ujistěte, že ampZáchranný pás je bezpečně zabalen, aby se zabránilo fyzickému poškození.
  • Péče o kabely: Regularly check all cables for signs of wear or damage. Replace faulty cables immediately.

7. Řešení problémů

ProblémMožná příčinaŘešení
Žádný zvukový výstup
  • Napájení není připojeno nebo zapnuto.
  • Kytarový kabel je vadný nebo není zcela zasunutý.
  • Speaker cable faulty or not fully inserted.
  • Nesoulad impedance reproduktorů.
  • Volume/Gain knobs set to minimum.
  • Headphones connected to PHONES/LINE OUT.
  • Check power connection and ON/OFF switch.
  • Ensure guitar cable is secure and functional.
  • Ensure speaker cable is secure and functional.
  • Verify speaker impedance is 4-16Ω.
  • Increase Volume and Gain.
  • Disconnect headphones if using speaker output.
Nadměrný hukot nebo šum
  • Faulty power supply or ground loop.
  • Nastavení vysokého zisku.
  • Rušení od jiných elektronických zařízení.
  • Single-coil pickups (inherently more susceptible to hum).
  • Try a different power outlet or a high-quality isolated power supply.
  • Reduce gain settings.
  • Pohyb ampUchovávejte vysavač mimo dosah jiné elektroniky.
  • Consider using humbucker pickups or a noise gate pedal.
Zkreslený nebo slabý zvuk
  • Vadné kabely.
  • Incorrect speaker connection.
  • Poškozený reproduktor.
  • Vstupní signál je příliš horký.
  • Zkontrolujte a v případě potřeby vyměňte kabely.
  • Ensure speaker cable is correctly connected and speaker impedance is correct.
  • Test with a different speaker if possible.
  • Reduce output from guitar or preceding pedals.

8. Specifikace

Model:TANLA1
Výstupní Wattage:5 wattů
Zdroj napájení:Elektrické napájení (18V DC, středový záporný)
Kompatibilní zařízení:Kytara
Typ konektoru:1/4" Jack (Input, Speaker Out, FX Loop), 3.5mm Jack (Phones/Line Out, AUX In)
Hmotnost položky:15.5 unce (cca 440 gramů)
Rozměry produktu:2.34 x 5.03 x 2.95 palců (přibližně 5.9 x 12.8 x 7.5 cm)
Typ materiálu:Nerez
Barva:Černý

9. Informace o záruce

Hotone products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your Hotone Nano Legacy British Invasion amplifier head, please refer to the warranty card included with your purchase or visit the official Hotone webstránky. Uschovejte si doklad o koupi pro případ reklamace.

10. Zákaznická podpora

If you encounter any issues not covered in this manual or require further assistance, please contact Hotone customer support. You can usually find contact information, including email and phone numbers, on the official Hotone webmísto.

Visit Hotone Audio Support Page (Napřampodkaz, skutečný odkaz se může lišit)

© 2024 HOTONE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.