Konstsmide 3607-002

Konstsmide Outdoor Light Set Add-On Timer

Model: 3607-002

Zavedení

Thank you for choosing the Konstsmide Outdoor Light Set Add-On Timer. This device is designed to provide convenient automatic operation for your Konstsmide 24V static light sets, allowing them to switch on and off at a set time each day. Please read this manual carefully before installation and use to ensure safe and optimal performance.

Důležité bezpečnostní informace

  • This timer is designed for outdoor use with Konstsmide 24V static light sets only. Do not use with other voltage systems or non-Konstsmide products.
  • Ujistěte se, že všechna připojení jsou bezpečná a chráněná před vlhkostí.
  • Do not attempt to open or modify the timer unit. Refer servicing to qualified personnel.
  • Uchovávejte mimo dosah dětí.
  • Před jakýmkoli připojením nebo odpojením odpojte napájení.

Obsah balení

  • 1 x Konstsmide Outdoor Light Set Add-On Timer (Model 3607-002)
  • 1 x Návod k použití

Konec produktuview

The Konstsmide Add-On Timer features a simple button interface for setting the 9-hour timer function or manually controlling your lights.

Konstsmide 3607-002 Outdoor Light Set Add-On Timer, white unit with two cables and connectors, showing the timer button and labels '1. Timer 9 hours', '2. On', '3. Off'.

Obrázek 1: Konstsmide 3607-002 Outdoor Light Set Add-On Timer. This image displays the white timer unit with its input and output connectors, and the single control button with its three labeled functions: Timer (9 hours), On, and Off.

Pokyny pro nastavení

  1. Ensure your Konstsmide 24V static light set is disconnected from its power source.
  2. Connect the timer's input cable (the one with the male connector) to your existing Konstsmide transformer's output.
  3. Connect your Konstsmide 24V static light set to the timer's output cable (the one with the female connector).
  4. Once all connections are secure, plug your Konstsmide transformer into a suitable outdoor power outlet.

Návod k obsluze

The timer unit features a single button to cycle through its operating modes:

  • 1. Timer 9 hours: Press the button once to activate the 9-hour timer. The lights will turn on at the moment you press the button and remain on for 9 hours. They will then turn off for 15 hours. This cycle will repeat daily at the same time.
  • 2. On: Press the button a second time to set the lights to remain continuously on.
  • 3. Vypnuto: Press the button a third time to turn the lights off completely.

To reset the timer start time, simply unplug the transformer from the power outlet, wait a few seconds, plug it back in, and then press the button at your desired start time for the 9-hour timer function.

Údržba

  • Periodically inspect the timer and all connections for any signs of damage or wear.
  • Čistěte přístroj měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  • Ensure the unit is kept free from excessive dirt, debris, and standing water.

Odstraňování problémů

ProblémMožná příčinaŘešení
Světla se nerozsvítí.Žádné napájení transformátoru.
Uvolněná spojení.
Timer set to 'Off'.
Light set malfunction.
Check power outlet and transformer.
Ujistěte se, že jsou všechny kabely pevně připojeny.
Press button to cycle to 'On' or 'Timer' mode.
Test light set directly with transformer if possible.
Funkce časovače nefunguje podle očekávání.Nesprávné nastavení časovače.
Přerušení napájení.
Ensure the timer is in 'Timer 9 hours' mode. Reset the timer by unplugging and replugging the transformer, then setting the timer at the desired start time.
Světla blikají nebo stmívají.Uvolněné spojení.
Overloaded circuit (unlikely with this timer, but possible with light set).
Damaged light set.
Zkontrolujte všechna připojení.
Ensure the total LED count does not exceed 400 LEDs for the connected light set.
Inspect light set for damage.

Specifikace

  • Model: 3607-002
  • Značka: Konstsmide
  • Funkce: 9-hour timer, Continuous On, Continuous Off
  • Kompatibilita: Konstsmide 24V static low voltage outdoor connected items (excluding 46XX connectable range)
  • Maximální zatížení: Až 400 LED diody
  • Barva: Bílý
  • Hmotnost položky: 0.04 kg

Záruka a podpora

For warranty information or technical support, please refer to the official Konstsmide webnebo kontaktujte jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.

© Konstsmide. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.