AOLIKES 902035 600mAh Replacement Battery User Manual

1. Úvod

This manual provides essential information for the safe and effective use of your AOLIKES 902035 600mAh Replacement Lithium-ion Battery. Please read this manual thoroughly before installation and use.

Obrázek 1.1: Nahoře view of the AOLIKES 902035 600mAh Lithium-ion Battery, displaying its model number and voltage specifikace.

2. Konec produktuview

The AOLIKES 902035 is a 3.7V rechargeable Lithium-ion battery designed as a replacement for various portable electronic devices.

Klíčové vlastnosti:

• svtage: 3.7V nominal, 4.2V fully charged.
• Kapacita: 600mAh (2.22Wh).
• Model: PL902035.
• Ochrana: Built-in battery protection circuit module (PMC) to prevent overdischarge and short circuit.
• Konektor: Genuine JST Connector Ph1.25, 2-Pin.

Obrázek 2.1: Boční strana view of the AOLIKES 902035 battery, highlighting the attached JST 2-Pin connector.

3. Nastavení a instalace

Follow these steps for proper installation of the replacement battery:

1. Příprava: Ensure the device is powered off and disconnected from any power source before beginning the replacement process.
2. Vyjmutí staré baterie: Carefully remove the old battery from your device. Note its orientation and wiring.
3. Kontrola polarity: Before connecting the new battery, compare its wiring with the old battery. The red wire on the AOLIKES 902035 battery connects to the positive (+) power pole, and the black wire connects to the negative (-) power pole. Ensure correct polarity to prevent damage to the device or battery.
4. Spojení: Connect the JST 2-Pin connector of the new battery to the corresponding port on your device's circuit board.
5. Bezpečné umístění: Place the new battery securely within the device's battery compartment.
6. Opětovná montáž: Reassemble your device carefully.

Obrázek 3.1: Detailní view of the JST 2-Pin connector, showing its dimensions for compatibility verification.

4. Návod k obsluze

Once installed, the battery operates as a standard power source for compatible devices. For optimal performance:

• Počáteční poplatek: It is recommended to fully charge the battery before its first use in the device.
• Nabíjení: Use a charger compatible with 3.7V Lithium-ion batteries. Avoid overcharging or using incompatible chargers.
• Splnit: Avoid completely draining the battery to 0% charge, as this can reduce its lifespan.
• Teplota: Operate the battery within recommended temperature ranges (typically 0°C to 45°C for charging, -20°C to 60°C for discharging).

5. Údržba a skladování

• Čištění: Keep battery contacts clean and free from dust or debris. Use a dry, soft cloth for cleaning.
• Skladování: If storing the battery for an extended period, charge it to approximately 50% and store in a cool, dry place away from direct sunlight and extreme temperatures.
• Pravidelná kontrola: Periodically check the battery for any signs of swelling, leakage, or damage. Discontinue use immediately if any issues are observed.

6. Řešení problémů

7. Specifikace

8. Safety Warnings and Disposal

• Do not disassemble, puncture, short circuit, or expose the battery to fire or high temperatures.
• Uchovávejte mimo dosah dětí.
• Do not use if the battery appears damaged, swollen, or leaking.
• Baterie zlikvidujte zodpovědně v souladu s místními předpisy. Nevyhazujte je do domovního odpadu.