Návod k montáži TV na stěnu RICOO S2722

1. Úvod

Thank you for choosing the RICOO S2722 TV Wall Mount. This manual provides essential instructions for safe installation, proper operation, and maintenance of your new wall mount. Please read this manual thoroughly before installation and keep it for future reference.

The RICOO S2722 is an articulating and swivel TV wall mount designed for televisions ranging from 32 to 55 inches, supporting VESA standards up to 200x200 mm, and a maximum weight capacity of 20 kg. It offers flexible viewing angles with swivel and tilt capabilities.

Obrázek 1: Přední strana view of the RICOO S2722 TV Wall Mount.

2. Bezpečnostní informace

VAROVÁNÍ: Nepřečtení a nedodržení všech pokynů může vést k úrazu osob, poškození majetku nebo ke ztrátě záruky.

• Nosnost: Do not exceed the maximum load capacity of 20 kg (44 lbs). This mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury.
• Velikost obrazovky: Compatible with TVs from 32 to 55 inches. Ensure your TV's VESA pattern and weight are within the specified limits.
• Kompatibilita VESA: This mount supports VESA patterns 100x100, 100x200, 200x100, and 200x200 mm. Verify your TV's VESA pattern before installation.
• Typ stěny: This mount is designed for installation on solid concrete walls, brick walls, or wood stud walls. Do not install on drywall alone.
• Profesionální instalace: Pokud si nejste jisti postupem instalace nebo vhodností vaší zdi, poraďte se s kvalifikovaným odborníkem.
• Děti: Udržujte děti mimo dosah místa instalace. Malé části mohou představovat nebezpečí udušení.
• Nástroje: K instalaci používejte vhodné nástroje. Ujistěte se, že všechny upevňovací prvky jsou bezpečně utažené, ale nepřetahujte je.

3. Obsah balení

Please check that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact RICOO customer support.

Typicky zahrnuté komponenty:

• Wall mount assembly (articulating arm and wall plate)
• VESA TV plate
• Mounting hardware kit (various screws, washers, spacers for TV and wall)
• Hex keys for adjustments
• Návod k použití

4. Nastavení a instalace

4.1 Kontroly před instalací

Before you begin, ensure your TV and wall are compatible with the mount.

1. Zkontrolujte hmotnost televizoru: Ensure your TV weighs no more than 20 kg (44 lbs).
2. Zkontrolujte VESA vzor: Measure the horizontal and vertical distance between the mounting holes on the back of your TV. This mount supports VESA 100x100, 100x200, 200x100, and 200x200 mm.


Figure 2: Measure VESA distances (A and B) on your TV.

3. Check TV Dimensions: Consider the overall dimensions of your TV to ensure it fits your desired viewing area and does not interfere with adjacent walls or furniture when articulated.


Figure 3: Consider overall TV dimensions (C and D).

4. Konstrukce stěny: Identify your wall type (wood stud, concrete, brick). Ensure the wall can safely support the combined weight of the mount and your TV.

4.2 Attaching the VESA Plate to the TV

1. Opatrně položte televizor displejem dolů na měkký, čistý povrch, abyste zabránili poškrábání.
2. Align the VESA TV plate with the mounting holes on the back of your TV.
3. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV's mounting holes. Use spacers if the TV back is uneven or if cables need clearance.
4. Securely fasten the VESA plate to the TV using a screwdriver. Do not overtighten.

Figure 4: Attaching the VESA plate to the TV.

4.3 Montáž nástěnné desky na zeď

1. Determine the desired height and position for your TV. Use a pencil to mark the drilling locations for the wall plate.
2. Use a stud finder to locate wood studs if installing on a wood stud wall. For concrete or brick walls, use appropriate anchors (not always included, may need to be purchased separately).
3. Drill pilot holes at the marked locations. Ensure the holes are level using a spirit level.
4. Attach the wall plate of the mount to the wall using the provided lag bolts and washers. Tighten securely.

Figure 5: Securing the wall mount to the wall.

4.4 Attaching the TV to the Wall Mount

1. With assistance, carefully lift the TV (with the VESA plate attached) and hook it onto the articulating arm of the wall mount.
2. Ensure the TV is securely seated on the mount.
3. Tighten any safety screws or locking mechanisms on the mount to prevent accidental dislodgement.

Figure 6: Attaching the TV to the wall mount arm.

4.5 Správa kabelů

Route your TV cables through the integrated cable management channels on the mount arm to maintain a tidy appearance and prevent cable damage.

Figure 7: Cable management through the mount arm.

5. Obsluha a seřízení

The RICOO S2722 mount offers various adjustments for optimal viewpohodlí:

• Otočný: The articulating arm allows you to swivel your TV left or right to achieve the desired viewing angle. Gently push or pull the TV to adjust its horizontal position.
• Náklon: The TV plate can be tilted up or down to reduce glare or optimize vertical viewing angles. Loosen the tilt adjustment knobs (if present), adjust the angle, and then re-tighten. The maximum tilt angle is 30 degrees.
• Prodloužení/zatažení: The articulating arm allows you to extend the TV away from the wall or push it back closer to the wall.
• Úprava úrovně: Some mounts include a post-installation leveling feature. If your TV appears slightly unlevel, refer to the specific instructions for your model to make minor rotational adjustments.

Figure 8: Dimensional drawing illustrating the mount's range of motion.

6. Údržba

• Čištění: Otřete držák měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Pravidelné kontroly: Pravidelně kontrolujte všechny šrouby a spoje, zda jsou pevně utažené a bezpečné. V případě potřeby je dotáhněte.
• Mazání: Moving parts are generally maintenance-free. Do not apply lubricants unless specifically instructed by the manufacturer.

7. Řešení problémů

• Televizor není vodorovně umístěn: Check if the wall plate was installed level. Some mounts allow for minor post-installation leveling adjustments. Refer to the specific mechanism on your mount.
• Držák se zdá být uvolněný: Ensure all wall mounting bolts and TV attachment screws are securely tightened. Do not overtighten.
• Difficulty adjusting movement: Check for any locking mechanisms that might be engaged. If the movement is too stiff or too loose, there might be tension adjustment screws (often requiring a hex key) that can be adjusted.
• Mount cannot hold TV weight: Re-verify your TV's weight against the mount's maximum capacity. If the TV is too heavy, the mount is not suitable. Ensure the wall anchors are appropriate for your wall type and correctly installed.

8. Specifikace

9. Záruka a podpora

9.1 Záruka na produkt

The RICOO S2722 TV Wall Mount comes with a Záruka 24 měsíců from the date of purchase. This warranty covers manufacturing defects and material faults under normal use. It does not cover damage caused by improper installation, misuse, accidents, or unauthorized modifications.

9.2 Zákaznická podpora

For technical assistance, missing parts, or warranty claims, please contact RICOO customer support. You can typically find contact information on the product packaging or the official RICOO website. Please have your model number (S2722) and proof of purchase ready when contacting support.

For more information, you may visit the RICOO store: RICOO Store on Amazon