1. Úvod
This instruction manual provides essential information for the proper installation, operation, and maintenance of your HELLA 90mm Halogen/DE Headlight Module. This high-performance headlight is designed for 24V vehicle electrical systems and is suitable for a wide range of applications, particularly in trucks and agricultural vehicles. It features both high beam and low beam functions and is ECE-compliant for right-hand traffic.
Please read this manual thoroughly before installation and use to ensure safety and optimal performance of the product.
2. Bezpečnostní informace
- Před prováděním jakýchkoli elektrických prací vždy odpojte baterii vozidla, abyste předešli zkratu a úrazu elektrickým proudem.
- Během instalace používejte vhodné osobní ochranné prostředky, včetně ochranných brýlí a rukavic.
- Ensure that the headlight module is compatible with your vehicle's electrical system (24V).
- Do not touch the halogen bulb with bare hands, as oils from your skin can cause hot spots and reduce bulb life.
- Secure all wiring connections properly to prevent loose contacts, which can lead to flickering or failure.
- Professional installation is recommended for complex wiring or if you are unsure about any steps.
3. Obsah balení
Verify that all components are present and undamaged before proceeding with installation. The package typically includes:
- HELLA 90mm Halogen/DE Headlight Module (1AL 009 998-041)
- Pre-mounted adjustment screws
- H7 24V bulb (included)
- Necessary connectors (AMP typ)
4. Nastavení a instalace
The HELLA 90mm Halogen/DE Headlight Module is designed for straightforward installation, featuring pre-mounted adjustment screws for ease of alignment.
4.1. Příprava
- Ujistěte se, že je vypnuté zapalování vozidla a odpojená baterie.
- Identify the mounting location for the headlight module. This module is suitable for both front left and front right positions.
- Remove any existing headlight components if replacing.
4.2. Montáž modulu
- Carefully position the HELLA headlight module into the designated opening.
- Secure the module using the pre-mounted adjustment screws. Ensure it is firmly seated and aligned.
4.3. Elektrické připojení
- Připojte AMP-type connectors from the vehicle's wiring harness to the corresponding terminals on the headlight module. Refer to your vehicle's wiring diagram if necessary.
- Ensure all connections are secure and properly insulated to prevent moisture ingress and corrosion.
4.4. Beam Adjustment
- Znovu připojte baterii vozidla.
- Turn on the headlights.
- Use the adjustment screws to correctly aim the headlight beam. Proper beam alignment is crucial for road safety and to comply with ECE regulations. Consult a professional for precise beam adjustment if needed.
5. Návod k obsluze
The HELLA 90mm Halogen/DE Headlight Module provides two primary lighting functions: low beam and high beam.
- Potkávací: Activates the standard driving light, designed to illuminate the road ahead without dazzling oncoming traffic. Use this setting for general driving conditions, especially at night or in low visibility.
- Dálkové světlo: Provides maximum illumination for extended visibility. Use high beams only when no other vehicles are present on the road or when driving in areas with no street lighting. Switch to low beam when approaching or following other vehicles.
Control of these functions is typically managed through your vehicle's standard headlight switch and stalk controls.
6. Údržba
Regular maintenance ensures the longevity and optimal performance of your headlight module.
- Čištění: Periodically clean the headlight lens with a soft cloth and mild soap solution. Avoid abrasive cleaners or harsh chemicals that could damage the glass lens.
- Výměna žárovky: The module uses an H7 24V halogen bulb. If a bulb fails, replace it with a new H7 24V bulb of the correct wattage (typically 70W for 24V systems). Refer to section 4.3 for accessing the bulb housing. Ensure the new bulb is inserted correctly and the housing is sealed to prevent moisture ingress.
- Inspekce: Regularly check for any signs of damage to the lens, housing, or wiring. Ensure all mounting screws are tight.
7. Řešení problémů
If you encounter issues with your headlight module, refer to the following common problems and solutions:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Headlight does not illuminate | Blown bulb, faulty wiring connection, blown fuse, electrical system issue | Check and replace bulb. Inspect wiring and connections. Check vehicle fuses. Consult a professional if electrical system issues are suspected. |
| Tlumené nebo blikající světlo | Loose connection, aging bulb, insufficient voltage | Secure all electrical connections. Replace bulb. Verify vehicle's voltage zásobování. |
| Vlhkost uvnitř čočky | Improper seal, damaged housing | Ensure bulb housing is properly sealed. Inspect for cracks in the lens or housing. Replace module if damage is significant. |
8. Specifikace
Detailed technical specifications for the HELLA 90mm Halogen/DE Headlight Module (Model 1AL 009 998-041):
- Číslo modelu: 1AL 009 998-041
- Značka: Hella
- Assembly Name: Halogen/DE Projector
- Typ zdroje světla: Halogen (H7 bulb included)
- svtage: 24 voltů
- Funkce osvětlení: 2 (High Beam, Low Beam)
- Materiál čočky: Sklo
- Barva čočky: Jasný
- Barva pouzdra: Černý
- Rozměry produktu (D x Š x V): 19 x 14.3 x 12 cm
- Hmotnost: 914 gramů
- Conformity Mark: ECE/E1 2484 (for right-hand traffic)
- Typ servisu vozidla: Truck, Agricultural Vehicle
- Speciální funkce: Pre-mounted adjustment screws for easy installation
- Země původu: Rumunsko
9. Záruka a podpora
This HELLA headlight module comes with a 2letá záruka výrobce od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání.
For warranty claims, technical support, or further assistance, please contact your HELLA dealer or authorized service center. Keep your proof of purchase for warranty validation.