Inventum MK350 Milk Frother

Zavedení

Thank you for choosing the Inventum MK350 Milk Frother. This appliance is designed to quickly and efficiently froth milk for various beverages or heat milk to your desired temperature. Please read this manual carefully before using the appliance to ensure safe and optimal operation. Keep this manual for future reference.

Důležité bezpečnostní pokyny

• Před použitím si přečtěte všechny pokyny.
• Do not immerse the frother unit or power base in water or other liquids.
• Zajistěte zvtage uvedené na spotřebiči odpovídá místnímu síťovému napětítage před připojením.
• Tento spotřebič je určen pouze pro domácí použití. Nepoužívejte venku.
• Spotřebič vždy umístěte na stabilní, rovný a žáruvzdorný povrch.
• Spotřebič neprovozujte s poškozeným kabelem nebo zástrčkou nebo poté, co spotřebič nefunguje správně nebo byl jakýmkoliv způsobem poškozen.
• Udržujte spotřebič a jeho kabel mimo dosah dětí.
• Nedotýkejte se horkých povrchů. Použijte rukojeti nebo knoflíky.
• Vytáhněte zástrčku ze zásuvky, když ji nepoužíváte a před čištěním. Před nasazením nebo sejmutím dílů a před čištěním spotřebiče jej nechte vychladnout.
• Nepoužívejte příslušenství nedoporučené výrobcem.

Konec produktuview

Familiarize yourself with the components of your Inventum MK350 Milk Frother.

Obrázek 1: This image displays the Inventum MK350 Milk Frother from the front, showcasing its stainless steel upper body, black base, handle, and the control panel with indicator lights and power button.

Obrázek 2: Strana view of the Inventum MK350 Milk Frother, emphasizing the ergonomic handle and the pouring spout integrated into the stainless steel jug.

Obrázek 3: A view into the interior of the milk frother, highlighting the non-stick coating and the small central pin where the frothing whisk is attached.

Obrázek 4: A close-up image of the small, detachable whisk with a spring coil, designed for creating milk foam. This whisk attaches to the central pin inside the frother.

Obrázek 5: The separate power base for the milk frother, featuring a central connector for the frother unit and a power cord.

Komponenty:

• Napěňovač: Stainless steel jug with non-stick interior.
• Zacházet s: Ergonomic handle for safe pouring.
• Víčko: Transparent lid (not explicitly shown but implied for frother).
• Metlička na pěnění: Detachable whisk with spring coil for frothing.
• Topná metla: (If applicable, otherwise use frothing whisk for heating too). The input suggests one whisk for frothing.
• Ovládací panel: Power button and indicator lights for different functions.
• Napájecí základna: Cordless 360-degree rotating base with power cord.

Nastavení

1. Rozbalení: Opatrně odstraňte veškerý obalový materiál. Uschovejte si obal pro budoucí skladování nebo přepravu.
2. Počáteční čištění: Before first use, clean the frother jug and whisk according to the 'Maintenance and Cleaning' section. Wipe the exterior of the power base with a damp tkanina.
3. Umístění: Place the power base on a dry, stable, and level surface away from water sources and heat.
4. Nástavec na šlehání: Insert the frothing whisk onto the central pin inside the frother jug. Ensure it is securely seated.

Návod k obsluze

The Inventum MK350 offers options for hot frothing, cold frothing, and heating milk.

1. Příprava napěňovače: Ensure the frothing whisk is correctly installed inside the jug.
2. Přidejte mléko: Pour cold milk into the frother jug. Observe the internal markings for maximum fill levels:
   • Pro pěnění (hot or cold): Do not exceed the 115 ml označit.
   • Pro pouze topení (without frothing): Do not exceed the 240 ml označit.

   Note: Using full-fat milk typically yields the best frothing results.
3. Umístění na energetickou základnu: Position the frother jug onto the power base.
4. Vyberte funkci:
   • Pro hot frothing or ohřívání mléka: Press the power button once. The red indicator light will illuminate, and the frother will begin operation.
   • Pro studené pěnění: Press and hold the power button for approximately 2 seconds. The blue indicator light will illuminate, and the frother will begin cold frothing.
5. Operace: The frother will operate for approximately 90 seconds for frothing, or until the milk reaches the optimal temperature for heating, then automatically switch off. The indicator light will turn off.
6. Sloužit: Carefully remove the frother jug from the power base and pour the frothed or heated milk into your beverage.
7. Ochladit: Allow the frother to cool down for a few minutes between uses to ensure optimal performance and prevent overheating.

Údržba a čištění

Regular cleaning ensures the longevity and hygiene of your milk frother. Always unplug the appliance before cleaning.

1. Odpojte a nechte vychladnout: Disconnect the power base from the mains outlet and allow the frother jug to cool down completely after use.
2. Odstraňte metlu: Carefully remove the frothing whisk from the central pin inside the jug.
3. Clean Frother Jug: The frother jug is Pouze ruční mytí. Wash the interior of the jug with warm, soapy water and a soft sponge or cloth. The non-stick coating facilitates easy cleaning. Rinse thoroughly and dry immediately. Do not use abrasive cleaners or scouring pads, as these can damage the non-stick surface.
4. Clean Whisk: Wash the frothing whisk with warm, soapy water. Use a small brush if necessary to clean the spring coil. Rinse and dry thoroughly.
5. Čistý exteriér: Otřete vnější povrch napěňovače a výkonné základny vodouamp hadříkem. Neponořujte napájecí základnu do vody.
6. Skladování: Once clean and dry, store the frother with the whisk inside the jug, or in a safe place.

Odstraňování problémů

If you encounter issues with your Inventum MK350 Milk Frother, refer to the following common problems and solutions:

• Frother does not start:
  • Ensure the power base is securely plugged into a working electrical outlet.
  • Verify the frother jug is correctly placed on the power base.
  • Pevně ​​stiskněte tlačítko napájení.
• Milk is not frothing or frothing poorly:
  • Check that the frothing whisk is properly installed on the central pin.
  • Ensure the milk level does not exceed the maximum fill line for frothing (115 ml).
  • Use cold, fresh milk. Full-fat milk generally froths better than low-fat or skim milk.
  • Clean the whisk and the interior of the jug thoroughly, as residue can affect performance.
• Milk is not heating:
  • Ensure the milk level does not exceed the maximum fill line for heating (240 ml).
  • Confirm the correct function (hot frothing/heating) was selected.
  • Allow the appliance to cool down if it has been used multiple times in quick succession, as an overheating protection mechanism might be active.
• Indicator lights are not working:
  • Check power connection and ensure the frother is operating. If the frother is working but lights are off, contact customer support.

If the problem persists after attempting these solutions, please contact Inventum customer support or your retailer.

Specifikace

Záruka a podpora

For information regarding the warranty period and conditions for your Inventum MK350 Milk Frother, please refer to the warranty card included with your purchase or consult the retailer from whom you purchased the product. For technical support, spare parts, or service inquiries, please contact Inventum customer service directly or visit their official webstránky pro kontaktní údaje.