Uživatelská příručka k dálkovému ovladači Elero MonoTel 2

1. Úvod

The Elero MonoTel 2 is a pure white, 1-channel remote control operating at an 868 MHz wireless radio frequency. It is designed for convenient control of roller shutters, blinds, and awnings. This manual provides essential information for the setup, operation, and maintenance of your device.

Obrázek 1: Přední strana view of the Elero MonoTel 2 Remote Control. The device is white with a dark grey base, featuring three central buttons: an upper square button, a circular button with an orange ring, and a lower square button. The Elero logo is visible on the dark grey base.

2. Klíčové vlastnosti

• Easy-to-use On/Off Buttons: Designed for intuitive control with a clear LED viewing okno.
• Magnetický nástěnný držák: Pro pohodlné skladování a přístupnost.
• Napájení z baterie: Uses common batteries (not included).
• Všestranná kompatibilita: Supports both unidirectional and bidirectional radio systems.
• Pokročilé možnosti ovládání: Allows for intermediate positioning and ventilation functions.

3. Nastavení

3.1. Instalace baterie

1. Najděte přihrádku na baterie na zadní straně dálkového ovladače.
2. Otevřete kryt přihrádky.
3. Insert the required common batteries, ensuring correct polarity (+/-).
4. Bezpečně zavřete kryt bateriového prostoru.

3.2. Spárování s přijímačem

Refer to the instruction manual of your Elero receiver (e.g., for roller shutters, blinds, or awnings) for specific pairing procedures. Generally, this involves:

• Activating the programming mode on your receiver.
• Pressing a specific button sequence on the MonoTel 2 remote control within a set timeframe.
• Confirming successful pairing, often indicated by an LED on the receiver or the remote.

3.3. Montáž na stěnu

The MonoTel 2 comes with a magnetic wall mount. Choose a suitable location, ensuring it is within range of your controlled devices. Secure the wall mount using appropriate screws (not included) and then simply attach the remote control to the magnetic mount.

4. Návod k obsluze

The MonoTel 2 remote control features three primary buttons for operation:

• Upper Square Button: Typically used for Up or OTEVŘENO functions (e.g., raising a shutter).
• Circular Button (with orange ring): Funguje jako Zastávka or Mezipoloha button. Pressing it during movement will stop the device. A quick press can activate a pre-set intermediate position.
• Lower Square Button: Typically used for Dolů or Blízko functions (e.g., lowering a shutter).

4.1. Základní ovládání

• To move the device up/open: Stiskněte tlačítko Upper Square Button.
• To move the device down/close: Stiskněte tlačítko Lower Square Button.
• Na zastávka the device: Press the Circular Button během pohybu.

4.2. Intermediate Position and Ventilation

If configured with your receiver, a short press of the Circular Button can activate a pre-programmed intermediate position. Consult your receiver's manual for programming these advanced functions.

5. Údržba

5.1. Čištění

Wipe the remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the surface.

5.2. Výměna baterie

Když LED dioda viewing window indicates low battery or the remote's range decreases, replace the batteries as described in the "Battery Installation" section (3.1). Dispose of old batteries responsibly according to local regulations.

6. Řešení problémů

7. Specifikace

8. Záruka a podpora

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official Elero webUschovejte si doklad o koupi pro případ reklamace.

Manufacturer: Elero