Antari HZ-350 Haze Machine Uživatelská příručka

Zavedení

Welcome to the user manual for your Antari HZ-350 Haze Machine. This document provides essential information for the safe and effective operation, setup, and maintenance of your new haze machine. The HZ-350 is designed to produce a fine, even haze effect, enhancing lighting and visual productions. It features an innovative LCD control panel for easy timer and DMX address settings, and includes wireless on/off control for flexible operation.

Důležité bezpečnostní informace

VAROVÁNÍ!

• Always disconnect power before changing the fuse or performing any servicing.
• Používejte pouze pod dohledem dospělých.
• Do not operate the machine without haze fluid.
• For indoor use only. Keep the machine dry and away from moisture.
• The machine contains no user-serviceable parts inside. Refer all servicing to qualified personnel.

Obsah balení

Zaškrtněte prosím políčko, abyste se ujistili, že jsou přítomny všechny položky:

• Antari HZ-350 Haze Machine
• Wireless on/off controller
• Napájecí kabel
• Uživatelská příručka (tento dokument)

Konec produktuview

The Antari HZ-350 Haze Machine is a robust unit designed for professional use. Its compact design houses powerful components for consistent haze output.

Obrázek: Zadní view of the Antari HZ-350 Haze Machine. Visible components include the LCD control panel with Timer and On buttons, DMX In and Out ports, a remote control input, the main power input with a red power switch, and a cooling fan. Warning labels and product information are also visible.

Klíčové vlastnosti

• Delivers up to 52 hours of non-stop haze with appropriate fluid levels.
• Easy-to-use built-in LCD control panel for direct settings.
• Wireless on/off controller is included for remote operation.
• DMX control allows for precise orchestration of timed discharges and integration into lighting systems.
• Designed for use with non-toxic, non-flammable haze fluid.

Nastavení

Vybalení a umístění

1. Opatrně vyjměte HZ-350 z obalu.
2. Place the machine on a stable, flat, and heat-resistant surface. Ensure adequate ventilation around the unit, keeping at least 12 inches (30 cm) clear on all sides, especially around the fan.
3. Ensure the machine is placed in an area where the haze output will not obstruct emergency exits or fire detection systems.

Instalace kapalin

1. Vyhledejte víčko nádržky na kapalinu na horní straně jednotky.
2. Unscrew the cap and carefully pour Antari Haze Fluid (or other compatible non-toxic, non-flammable haze fluid) into the reservoir. Do not overfill.
3. Securely replace the fluid reservoir cap.

Připojení napájení

1. Ensure the power switch on the rear of the unit is in the 'OFF' position.
2. Connect the supplied power cable to the power input socket on the rear of the HZ-350.
3. Plug the other end of the power cable into a grounded electrical outlet (120 VAC for North America, 230 VAC for Europe).

Operace

Konec ovládacího paneluview

The HZ-350 features an intuitive LCD control panel on the rear of the unit:

• LCD displej: Shows current settings, DMX address, and timer information.
• Menu/Enter Buttons: Používá se k navigaci v nabídkách a potvrzování výběrů.
• Tlačítka nahoru/dolů: Used to adjust values or scroll through options.
• Tlačítko časovače: Activates and sets the timer function for automated haze output.
• Na tlačítku: Manually triggers continuous haze output.

Initial Power-Up and Warm-Up

1. Flip the red power switch on the rear of the unit to the 'ON' position.
2. The machine will begin its warm-up cycle. The LCD display will indicate when the machine is ready for operation (typically a few minutes).

Bezdrátové ovládání

The included wireless on/off controller provides convenient remote activation:

1. Ensure the wireless receiver is connected to the 'REMOTE CONTROL' input on the rear of the HZ-350.
2. Press the button on the wireless controller to toggle haze output on or off.

DMX ovládání

For advanced control and integration with lighting systems, the HZ-350 supports DMX512 protocol:

1. Connect a DMX cable from your DMX controller's output to the 'DMX IN' port on the HZ-350.
2. If daisy-chaining multiple DMX devices, connect from the 'DMX OUT' port to the next device's 'DMX IN'.
3. Using the LCD control panel, set the DMX address for the HZ-350. Refer to your DMX controller's manual for specific programming instructions.
4. The HZ-350 typically uses 2 DMX channels: one for haze output intensity and another for fan speed (refer to the full DMX chart in the comprehensive manual for details).

Údržba

Regular maintenance ensures the longevity and optimal performance of your HZ-350 Haze Machine.

Čištění

• Pravidelně čistěte vnější povrch stroje měkkým, suchým hadříkem.
• Ensure the cooling fan and vents are free from dust and debris to prevent overheating. Use compressed air if necessary.
• For internal cleaning of the fluid system, run a distilled water solution through the machine every 20-30 hours of operation, or before extended storage. Consult the full manual for detailed cleaning procedures.

Výměna pojistky

WARNING: Always disconnect the machine from the power supply before attempting to change the fuse.

1. Locate the fuse holder next to the power input on the rear of the unit.
2. Using a small flathead screwdriver, gently pry open the fuse holder.
3. Remove the old fuse and replace it with a new fuse of the correct rating: 120 VAC / T7A or 230 VAC / T5A, as indicated on the unit.
4. Securely close the fuse holder.

Odstraňování problémů

If you encounter issues with your HZ-350, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Antari customer support or a qualified service technician.

Specifikace

Záruka a podpora

The Antari HZ-350 Haze Machine comes with a manufacturer's warranty. Please refer to the warranty card included with your product for specific terms and conditions. For technical support, service, or inquiries regarding replacement parts, please contact Antari customer service through their official website or your authorized dealer. Do not attempt to repair the unit yourself, as it contains no user-serviceable parts and doing so may void your warranty.