PROEL WD12A 12palcový 350W aktivní koaxiální StagUživatelská příručka k podlahovému monitoru e Wedge

1. Úvod

Thank you for choosing the PROEL WD12A Active Coaxial Stage Wedge Floor Monitor. This manual provides essential information for the safe and efficient use of your new audio equipment. The WD12A is designed to deliver clear sound intelligibility and high sound pressure levels in a lightweight, portable enclosure, making it suitable for professional musicians, rental companies, and amateur users.

Key features include a 12-inch coaxial transducer, a 350W Class D + 50W Class AB amplifier with SMPS, and two optimized EQ presets for either stage monitoring (MONITOR) or main sound system (FOH) applications. Its low-profile design and robust construction ensure reliable performance on any stage.

2. Konec produktuview

Familiarize yourself with the components and connections of your PROEL WD12A monitor.

Obrázek 2.1: Přední strana View of PROEL WD12A Monitor. This image displays the front of the PROEL WD12A active coaxial stage wedge floor monitor, highlighting its protective metal grille and the PROEL logo. The wedge shape is evident, designed for optimal sound projection when placed on a stage floor.

Figure 2.2: Rear Panel of PROEL WD12A Monitor. This image shows the recessed connection panel located at the rear of the PROEL WD12A monitor. Visible components include input/output connectors, power input, and control knobs for level adjustment and EQ preset selection. The model number WD12A is also clearly displayed.

Obrázek 2.3: Nahoře View of PROEL WD12A Monitor. Tento obrázek představuje pohled shora dolů view of the PROEL WD12A monitor, emphasizing its compact and low-profile design. The robust metal grille covering the speaker components is visible, along with the overall construction of the cabinet.

3. Nastavení

3.1 Vybalení

• Opatrně vyjměte monitor z obalu.
• Zkontrolujte jednotku, zda nevykazuje známky poškození, ke kterému mohlo dojít během přepravy. Pokud zjistíte poškození, okamžitě kontaktujte svého prodejce.
• Uschovejte si originální obal pro budoucí přepravu nebo skladování.

3.2 Umístění

The WD12A is designed primarily as a stage wedge monitor but can also function as a main sound system (FOH) speaker. Consider the following for optimal placement:

• Stage Monitor: Place the unit directly on the stage floor, angled towards the performer. Its low-profile design minimizes visual obstruction.
• Main Sound System (FOH): Utilize the integrated pole adapter to mount the speaker on a standard speaker pole for elevated sound projection. Ensure the pole and stand are stable and rated for the monitor's weight (approximately 11 kg / 24.25 lb).
• Zajistěte dostatečné větrání kolem jednotky, aby se zabránilo přehřátí.

3.3 Připojení

Before making any connections, ensure the monitor's power switch is in the OFF position and the main power cable is disconnected from the electrical outlet.

• Zvukový vstup: Connect your audio source (e.g., mixer, instrument pre-amp) to the LINE IN connector on the rear panel using a balanced XLR cable.
• Zvukový výstup (link): If connecting multiple monitors or sending the signal to another device, use the LINE OUT connector.
• Připojení napájení: Connect the supplied AC power cord to the POWER INPUT on the rear panel, then plug the other end into a grounded electrical outlet.

4. Návod k obsluze

4.1 Zapnutí/vypnutí

• Zapnutí: After all connections are made, set the LEVEL control to its minimum position. Connect the power cable to the outlet, then switch the POWER switch to the ON position.
• Vypnout: Before disconnecting power, set the LEVEL control to its minimum position, then switch the POWER switch to the OFF position. Disconnect the power cable from the outlet.

4.2 Nastavení vstupní úrovně

Use the LEVEL control knob on the rear panel to adjust the overall volume of the monitor. Start with a low level and gradually increase it to the desired listening volume. Monitor the LIMITER indicator; if it illuminates frequently or stays on, reduce the input level from your source or the monitor's LEVEL control to prevent distortion and protect the speaker.

4.3 předvolby ekvalizéru

The WD12A features two optimized EQ presets to adapt its sound profile to different applications:

• MONITOR: This preset is optimized for stage monitoring, providing enhanced vocal clarity and feedback resistance.
• FOH (Front-Of-House): This preset is tailored for use as a main sound system speaker, offering a flatter frequency response suitable for general audience listening.

Select the appropriate preset using the switch on the rear panel based on your application.

5. Údržba

5.1 Čištění

• Před čištěním odpojte jednotku od napájení.
• Use a soft, dry cloth to wipe down the cabinet.
• Pro odolnou špínu je potřeba mírněamp Lze použít hadřík s jemným mýdlem a poté suchý hadřík.
• Nepoužívejte abrazivní čisticí prostředky, rozpouštědla ani vosky, protože by mohly poškodit povrchovou úpravu.
• Keep liquids away from the control panel and speaker grille.

5.2 Skladování

When not in use for extended periods, store the monitor in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to use the original packaging or a protective cover to prevent dust accumulation and physical damage.

6. Řešení problémů

If you encounter issues with your PROEL WD12A monitor, refer to the following table for common problems and solutions:

If the problem persists after attempting these solutions, please contact PROEL customer support or your authorized dealer.

7. Specifikace

Technical specifications for the PROEL WD12A Active Coaxial Stage Wedge Floor Monitor:

8. Záruka a podpora

For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official PROEL website. You may also contact your authorized PROEL dealer for assistance.