SUPERNIGHT LED Strip Lights SMD 5050 (16.4FT/5M) Instruction Manual

1. Úvod

This manual provides detailed instructions for the installation, operation, and maintenance of your SUPERNIGHT 16.4FT (5M) SMD 5050 RGB LED Strip Lights. These flexible LED strips are designed for indoor use, offering vibrant color-changing illumination. Please read this manual thoroughly before use to ensure proper and safe operation.

2. Bezpečnostní informace

• Ensure the power supply (not included) matches the specified voltage (12V) and current requirements of the LED strip. Incorrect power can damage the product or pose a fire hazard.
• This product is rated IP65 waterproof, meaning it is protected against low-pressure water jets from any direction. It is intended for pouze pro vnitřní použití and should not be submerged in water or exposed to heavy outdoor weather conditions.
• Do not connect the LED strip directly to AC power. A DC 12V power adapter is required.
• Avoid bending the LED strip sharply, especially at the solder joints, as this can damage the circuit.
• Only cut the LED strip at designated cutting marks (indicated by a scissor icon) to avoid damaging the circuit.
• Uchovávejte mimo dosah dětí.
• Do not cover the LED strip with materials that could trap heat, as this may lead to overheating.

3. Obsah balení

The SUPERNIGHT LED Strip Lights package includes:

• 1 x SUPERNIGHT 16.4FT (5M) SMD 5050 RGB LED Strip (Model: st-ting-l263)

Poznámka: A DC 12V Power Adapter and an RGB remote controller are není součástí dodávky and must be purchased separately for full functionality.

4. Vlastnosti produktu

• SMD 5050 LED Technology: Features 300 high-brightness RGB LEDs on a 16.4ft (5M) flexible PCB board.
• Vibrant Color Changing: Capable of displaying a wide range of colors including red, green, blue, white, purple, yellow, pink, orange, and various colorful combinations.
• Vodotěsnost IP65: The PCB is covered with a polyester resin material, protecting the LEDs against multi-directional, low-pressure water jets. Suitable for indoor use.
• Cuttable and Joinable: The strip can be cut at designated scissor marks to adjust length. Additional strips can be connected using appropriate connectors (not included).
• Snadná instalace: Equipped with double-sided adhesive tape on the back for simple and secure mounting.
• Všestranná aplikace: Ideal for accent lighting in bedrooms, under cabinets, TV backlighting, aquariums, and other indoor decorative lighting needs.

5. Nastavení

5.1 Požadované komponenty (nejsou součástí dodávky)

• Napájecí adaptér DC 12V
• RGB Remote Controller (for color changing and mode selection)

5.2 kroky instalace

1. Připravte povrch: Clean the surface where the LED strip will be installed. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
2. Změření a řezání (volitelné): If a shorter length is desired, measure the required length and carefully cut the strip only at the designated cutting marks, indicated by a scissor icon. Cutting elsewhere will damage the circuit.



3. Oloupejte a nalepte: Carefully peel off the protective backing from the double-sided adhesive tape on the back of the LED strip. Press the strip firmly onto the prepared surface, ensuring good contact along its entire length.
4. Připojení k ovladači: Connect the 4-pin connector of the LED strip to your RGB remote controller (not included). Ensure the arrows on both connectors align.
5. Připojte napájení: Connect the RGB remote controller to a compatible DC 12V power adapter (not included). Then, plug the power adapter into a power outlet.

6. Návod k obsluze

Once the LED strip is properly installed and connected to a power source and RGB controller (not included), you can operate it using the remote controller.

• Zapnutí/vypnutí: Use the power button on your remote controller to turn the lights on or off.
• Výběr barvy: Select desired colors (Red, Green, Blue, White, etc.) directly from the remote controller's color palette.
• Nastavení jasu: Increase or decrease the brightness using the dedicated brightness control buttons on the remote.
• Výběr režimu: Choose from various dynamic modes (e.g., flash, strobe, fade, smooth) to create different lighting effects.

For specific functions and button layouts, refer to the instruction manual provided with your RGB remote controller.

7. Údržba

• Čištění: Gently wipe the LED strip with a dry, soft cloth to remove dust. Do not use harsh chemicals or abrasive cleaners. Ensure the strip is powered off and unplugged before cleaning.
• Inspekce: Periodically check the strip for any signs of damage, such as cracks in the resin coating or loose connections.
• Trvanlivost lepidla: If the adhesive begins to lose its stickiness, additional mounting clips or stronger adhesive tape may be used to secure the strip.

8. Řešení problémů

9. Specifikace

10. Oficiální produktová videa

The following video is provided by the seller to demonstrate product features and applications.

11. Záruka a podpora

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official SUPERNIGHT webUschovejte si účtenku jako doklad o koupi pro případné reklamace.