JBL JRX218S

JBL Professional JRX218S 18-Inch Passive Subwoofer Instruction Manual

Model: JRX218S

1. Úvod

This manual provides essential information for the proper setup, operation, and maintenance of your JBL Professional JRX218S 18-Inch Passive Subwoofer. Please read this manual thoroughly before using the product to ensure optimal performance and safety. The JRX218S is designed to deliver powerful low-frequency sound for various professional audio applications.

JBL Professional JRX218S 18-Inch Passive Subwoofer front view

Obrázek 1: Přední strana view of the JBL Professional JRX218S 18-Inch Passive Subwoofer.

2. Důležité bezpečnostní informace

  • Přečtěte si pokyny: Uschovejte si tyto pokyny pro budoucí použití.
  • Dbejte varování: Dodržujte všechna varování na výrobku a v návodu k obsluze.
  • Voda a vlhkost: Nepoužívejte toto zařízení v blízkosti vody.
  • Čištění: Čistěte pouze suchým hadříkem.
  • Větrání: Nezakrývejte žádné větrací otvory. Nainstalujte v souladu s pokyny výrobce.
  • Teplo: Neinstalujte v blízkosti zdrojů tepla, jako jsou radiátory, tepelné regulátory, kamna nebo jiná zařízení (včetně amplifikátory), které produkují teplo.
  • Ochrana napájecího kabelu: Chraňte napájecí kabel před šlapáním nebo přiskřípnutím, zejména u zástrček, zásuvek a v místě, kde vychází z přístroje.
  • Příslušenství: Používejte pouze nástavce/příslušenství specifikované výrobcem.
  • Montáž: Používejte pouze s vozíkem, stojanem, stativem, držákem nebo stolem určeným výrobcem nebo prodávaným se zařízením. Při používání vozíku buďte opatrní při přemísťování kombinace vozíku/přístroje, abyste se nezranili při převrácení.
  • Servis: Veškeré opravy svěřte kvalifikovanému servisnímu personálu. Servis je nutný, pokud bylo zařízení jakýmkoli způsobem poškozeno, například je poškozen napájecí kabel nebo zástrčka, pokud do zařízení vnikla tekutina nebo do něj spadly předměty, zařízení bylo vystaveno dešti nebo vlhkosti, nefunguje normálně. , nebo byla vypuštěna.

3. Co je v krabici

Po otevření obalu zkontrolujte, zda jsou všechny součásti přítomny a v dobrém stavu:

  • JBL Professional JRX218S 18-Inch Passive Subwoofer
  • Uživatelská příručka (tento dokument)

Pokud některá položka chybí nebo je poškozena, okamžitě kontaktujte svého prodejce.

4. Průvodce nastavením

4.1 Umístění

For optimal bass response, place the JRX218S subwoofer on a stable, flat surface. Corner placement can often enhance bass output, but experiment with different positions to find the best sound for your environment. Ensure adequate space around the unit for proper ventilation.

4.2 Připojení

The JRX218S is a passive subwoofer and requires an external amplifier. Connect your amplifier's output to one of the SpeakON inputs on the rear panel of the subwoofer. The two SpeakON inputs are wired in parallel, allowing for easy daisy-chaining to another passive speaker or subwoofer. Ensure your amplifier can safely drive a 4-ohm load.

JBL Professional JRX218S 18-Inch Passive Subwoofer rear panel with SpeakON inputs

Figure 2: Rear panel showing SpeakON input connectors.

4.3 Montáž na tyč

The subwoofer features a top-mounted, cast aluminum 35 mm pole mount receptacle. This allows you to mount a mid/high speaker cabinet directly above the subwoofer using an optional SS3BK pole (sold separately), creating a compact and integrated full-range sound system. Ensure the pole and mounted speaker are stable and secure.

JBL Professional JRX218S 18-Inch Passive Subwoofer with a pole-mounted speaker

Figure 3: JRX218S with an optional pole-mounted speaker (speaker and pole not included).

5. Návod k obsluze

5.1 Manipulace s napájením

The JRX218S has a continuous power handling capacity of 350 Watts and a peak power handling of 1400 Watts. It is crucial to match your amplifier's output to these specifications to prevent damage to the subwoofer. Overpowering or underpowering can lead to poor performance or component failure.

5.2 Impedance and Frequency Response

The subwoofer operates at an impedance of 4 ohms. Its frequency range is 34Hz-250Hz (-10dB), with a frequency response of 53Hz-250Hz (±3dB). This range is optimized for deep bass reproduction.

5.3 Integrace systému

When integrating the JRX218S into a larger PA system, use an external crossover to send only low-frequency signals to the subwoofer. This ensures efficient operation and prevents the subwoofer from attempting to reproduce frequencies outside its optimal range, which can lead to distortion and reduced performance.

6. Údržba

6.1 Čištění

To maintain the appearance and performance of your subwoofer, regularly wipe the exterior with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or excessive moisture, as these can damage the carpet covering and internal components.

6.2 Enclosure and Grille

The rugged enclosure is constructed from 19 mm (.75 in) Medium Density Fiberboard (MDF) and covered in black carpet. The 18-gauge perforated steel grille protects the speaker components. Inspect these periodically for any signs of damage. Minor scuffs on the carpet can often be brushed out. Do not attempt to remove the grille unless you are qualified service personnel.

7. Řešení problémů

ProblémMožná příčinaŘešení
Žádný zvukový výstup
  • Nesprávné zapojení nebo uvolněné spoje.
  • AmpZáchranný přístroj není zapnutý nebo je vadný.
  • Crossover settings incorrect (no low frequencies sent).
  • Check all SpeakON connections between ampzesilovač a subwoofer.
  • Ověřte ampvýkon a funkčnost záchranáře.
  • Ensure your audio processor or mixer is sending low-frequency signals to the subwoofer output.
Zkreslený zvuk
  • Overdriving the subwoofer (too much power).
  • Ampvýstřižek lifikátoru.
  • Nesprávná dělicí frekvence.
  • Reduce input level to the ampzesilovač nebo subwoofer.
  • Kontrola amplifier gain settings; ensure it's not clipping.
  • Adjust crossover to send only appropriate low frequencies to the subwoofer.
Weak or Insufficient Bass
  • Subwoofer phase issue.
  • Nesprávné umístění.
  • Amplifier not powerful enough.
  • Pokud váš amplifier or processor has a phase switch, try inverting the phase.
  • Experiment with different subwoofer placements (e.g., closer to a wall or corner).
  • Ujistěte se, že vaše amplifier provides sufficient power for the subwoofer's continuous rating.

8. Technické specifikace

FunkceDetail
ModelJRX218S
Typ reproduktoruPasivní subwoofer
Průměr basového reproduktoru18 palce
Power Handling (Continuous/Peak)350W / 1400W
Impedance4 ohmů
Frekvenční rozsah (-10 dB)34Hz - 250Hz
Frekvenční odezva (±3dB)53Hz - 250Hz
Maximální vrchol SPL133 dB SPL
Konektivita2 x SpeakON NL-4 (parallel)
Materiál pouzdra19 mm (.75 in) MDF with black carpet covering
Mřížka18-gauge perforated steel
Pole MountTop-mounted, cast aluminum 35 mm receptacle
Rozměry (V x Š x H)597 mm × 516 mm × 559 mm (23.5" × 20.3" × 22")
Hmotnost71 lb (32.5 kg)
JBL Professional JRX218S 18-Inch Passive Subwoofer dimensions diagram

Figure 4: Dimensions of the JRX218S subwoofer.

9. Záruka a podpora

9.1 Informace o záruce

The JBL Professional JRX218S 18-Inch Passive Subwoofer comes with a manufacturer's limited warranty. Please refer to the warranty card included with your product or visit the official JBL Professional webPodrobné obchodní podmínky naleznete na webových stránkách. Uschovejte si doklad o koupi pro případ reklamace.

9.2 Zákaznická podpora

For technical assistance, service, or further inquiries, please contact JBL Professional customer support. Contact details can typically be found on the official JBL webmístě nebo na obalu produktu.

© 2024 JBL Professional. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.