Breadman COMINHKR058410

Návod k obsluze horizontální pekárny chleba Breadman TR520

Model: TR520 / COMINHKR058410

Značka: Breadman

Důležitá ochranná opatření

Při používání elektrických spotřebičů je třeba vždy dodržovat základní bezpečnostní opatření, včetně následujících:

  • Read all instructions before operating the breadmaker.
  • Nedotýkejte se horkých povrchů. Použijte rukojeti nebo knoflíky.
  • Abyste zabránili úrazu elektrickým proudem, neponořujte kabel, zástrčky nebo zařízení do vody nebo jiné kapaliny.
  • Když je jakýkoli spotřebič používán dětmi nebo v jejich blízkosti, je nutný pečlivý dohled.
  • Vytáhněte zástrčku ze zásuvky, když ji nepoužíváte a před čištěním. Před nasazením nebo sejmutím dílů nechte vychladnout.
  • Neprovozujte žádný spotřebič s poškozenou šňůrou nebo zástrčkou nebo poté, co spotřebič nefunguje správně nebo byl jakýmkoliv způsobem poškozen.
  • Použití příslušenství, které není doporučeno výrobcem spotřebiče, může způsobit zranění.
  • Nepoužívejte venku.
  • Nenechávejte kabel viset přes okraj stolu nebo pultu ani se dotýkat horkých povrchů.
  • Neumisťujte na horký plynový nebo elektrický hořák nebo do jeho blízkosti nebo do vyhřáté trouby.
  • Při přemisťování spotřebiče obsahujícího horký olej nebo jiné horké kapaliny je třeba dbát mimořádné opatrnosti.
  • Pro odpojení vypněte libovolný ovladač a poté vytáhněte zástrčku ze zásuvky.
  • Nepoužívejte spotřebič k jinému než určenému použití.
  • Tento produkt obsahuje chemikálie, o kterých je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiná poškození reprodukce.

Konec produktuview

The Breadman TR520 is a horizontal loaf breadmaker designed to produce loaves up to 2 pounds. It features an intuitive control panel with 8 pre-programmed functions, a 13-hour delay timer, and crust control settings. The unit includes a removable bread pan and a kneading paddle for easy operation and cleaning.

Breadman TR520 Horizontal Loaf Breadmaker, angled view

Obrázek 1: Úhlové view of the Breadman TR520 Breadmaker, showcasing its white plastic exterior and top viewing okno.

Breadman TR520 Breadmaker control panel

Obrázek 2: Nahoře view of the Breadman TR520, highlighting the yellow control panel with program selections, display, and operation buttons.

Breadman TR520 Breadmaker with removable bread pan and kneading paddle

Figure 3: The Breadman TR520 Breadmaker shown alongside its removable bread pan and kneading paddle, ready for assembly.

Komponenty:

  • Hlavní jednotka: The primary housing for the baking chamber and control panel.
  • Plech na chleba: A removable, non-stick pan where ingredients are mixed and baked.
  • Hnětací metla: Attaches to the shaft inside the bread pan to mix and knead dough.
  • Measuring Cup/Spoon (not pictured, but typically included): Pro přesné odměření ingrediencí.

Před prvním použitím / nastavením

  1. Rozbalit: Carefully remove the breadmaker and all accessories from the packaging. Retain packaging for future storage or transport.
  2. Čistý: Wash the bread pan and kneading paddle with warm, soapy water. Rinse thoroughly and dry completely. Wipe the exterior of the breadmaker with a damp tkanina. Neponořujte hlavní jednotku do vody.
  3. Umístění: Place the breadmaker on a stable, flat, heat-resistant surface, away from direct sunlight and heat sources. Ensure adequate ventilation around the appliance.
  4. First Bake Cycle (Recommended): To eliminate any manufacturing odors, perform an empty bake cycle.
    • Insert the empty bread pan with the kneading paddle attached into the breadmaker.
    • Zavřete víko.
    • Plug in the breadmaker.
    • Select the "Bake Only" program (Program 8).
    • Press "Start/Stop". Allow the cycle to run for approximately 10-15 minutes, then press "Start/Stop" to cancel and unplug.
    • Allow the unit to cool completely before cleaning again.

Návod k obsluze

Přidání ingrediencí:

  1. Attach the kneading paddle to the shaft inside the bread pan. Ensure it is securely in place.
  2. Add ingredients to the bread pan in the order specified by your recipe. Typically, liquids are added first, followed by dry ingredients, with yeast added last on top of the dry ingredients, away from liquids and salt.
  3. Carefully place the filled bread pan into the breadmaker, pressing down firmly until it clicks into place.
  4. Bezpečně zavřete víko.

Funkce ovládacího panelu:

  • PROGRAM: Press to cycle through the 8 available programs. The selected program number will display on the LCD screen.
  • BOCHNÍK: Press to select the desired loaf size (e.g., 1.5 lb or 2 lb).
  • CRUST COLOR: Press to choose light, medium, or dark crust.
  • ČASOVAČ (+/-): Use these buttons to set the delay timer for delayed baking. Each press adjusts the time in 10-minute increments.
  • ZAČÁTEK KONEC: Press once to start the selected program. Press and hold for a few seconds to stop or cancel a program.

Starting a Program:

  1. Plug the breadmaker into a grounded electrical outlet.
  2. Select the desired program using the "PROGRAM" button.
  3. Select the loaf size using the "LOAF" button.
  4. Select the crust color using the "CRUST COLOR" button.
  5. If immediate baking is desired, press the "START/STOP" button. The breadmaker will begin its cycle.
  6. If using the delay timer, set the desired delay time using the "TIMER (+/-)" buttons, then press "START/STOP". The timer will count down before the program begins.

Vyjmutí chleba:

  1. Once the baking cycle is complete, the breadmaker will beep and may enter a 1-hour keep-warm cycle.
  2. Unplug the breadmaker.
  3. Using oven mitts, carefully remove the bread pan from the breadmaker. The pan and surrounding areas will be hot.
  4. Invert the bread pan onto a wire rack and shake gently until the bread loaf slides out. If the kneading paddle remains in the loaf, carefully remove it with a non-metallic utensil after the bread has cooled slightly.
  5. Nechte chléb před krájením alespoň 15–30 minut vychladnout na mřížce, aby se zajistila správná textura.

Programový průvodce

The Breadman TR520 offers 8 pre-programmed cycles to simplify various bread and dough preparations:

Program č.Název programuPopis
1ZÁKLADNÍFor white and mixed breads, primarily using basic bread flour.
2FRANCOUZŠTINAFor light breads made from fine flour, typically with a crispier crust.
3CELOZRNNÁFor breads containing a significant proportion of whole wheat flour.
4SLADKÝFor breads with high sugar, fats, and proteins, such as brioche or sweet rolls.
5TĚSTOPrepares dough for rolls, pizza, or other baked goods that will be shaped and baked in a conventional oven. No baking cycle.
6RYCHLÝA quicker cycle for basic breads, often resulting in a denser loaf.
7ULTRA RYCHLÝAn even faster cycle for basic breads, suitable for quick results.
8POUZE PEČUFor baking pre-prepared dough or for adding additional baking time to a loaf. No kneading or rising.

Note: Specific timings for each program may vary. Refer to your recipe book for detailed instructions and ingredient quantities for each program.

Péče a čištění

Správné čištění a údržba prodlouží životnost vaší pekárny chleba.

  • Před čištěním vždy odpojte pekárnu chleba ze zásuvky a nechte ji zcela vychladnout.
  • Nádoba na chleba a hnětací metla: Tyto části jsou Pouze ruční mytí. Wash with warm, soapy water. Do not use abrasive cleaners or scouring pads, as this can damage the non-stick coating. Rinse thoroughly and dry completely before storing or reassembling. If the kneading paddle is stuck, fill the pan with warm water and let it soak for 10-15 minutes to loosen it.
  • Vnější: Otřete vnější povrch pekárny chleba měkkým hadříkemamp cloth. Do not use harsh chemicals or abrasive cleaners. Never immerse the main unit in water or other liquids.
  • Interiér: Použijte měkký, damp cloth to wipe the inside of the baking chamber. Remove any crumbs or residue.
  • Skladování: Ensure all parts are clean and dry before storing the breadmaker. Store in a cool, dry place.

Odstraňování problémů

If you encounter issues with your Breadman TR520, consult the following common problems and solutions:

ProblémMožná příčinaŘešení
Chléb nevykyne nebo vykyne příliš.Incorrect yeast quantity, old yeast, water temperature too hot/cold, incorrect flour type, too much salt/sugar.Ensure yeast is fresh and active. Use lukewarm water (105-115°F / 40-46°C). Measure ingredients precisely. Check recipe for correct flour and ingredient ratios.
Bread is dense or heavy.Too much flour, not enough liquid, incorrect program selected, old yeast.Accurately measure flour (spoon into cup, level off). Ensure correct liquid amount. Select appropriate program for the bread type.
Hnětací metla zaseknutá v chlebu.Běžný jev.Allow bread to cool slightly. Use a non-metallic utensil (e.g., plastic spatula) to carefully pry out the paddle. Avoid metal utensils to prevent scratching the non-stick coating.
Stroj se nespustí nebo nereaguje.Není zapojeno, výpadek napájenítage, lid not closed properly, program not selected.Check power connection. Ensure lid is fully closed. Select a program and press "START/STOP". If still unresponsive, unplug for 5 minutes and try again.
Control panel labels are difficult to read.Low contrast between text and background color.Use the manual as a reference for button functions. Consider using a small task light for better visibility when operating the machine.

If the problem persists after attempting these solutions, please refer to the support section or contact customer service.

Specifikace

FunkceDetail
Číslo modeluTR520 / COMINHKR058410
ZnačkaChléb
Kapacita bochníkuAž 2 liber
Programy8 (Basic, French, Whole Wheat, Sweet, Dough, Rapid, Ultra Fast, Bake Only)
Časovač zpoždění13-hour programmable delay
Kontrola kůrySvětlé, střední, tmavé
Funkce Keep Warm1-hour automatic keep-warm
Moc560 wattů
BarvaBílý
Hmotnost položkyPřibližně 11.15 libry
Péče o produktPouze ruční mytí (nádoba na chleba a lopatka)
VýrobceAplikace

Záruka a podpora

For detailed warranty information, please refer to the warranty card included with your product or visit the official Breadman webZáruční podmínky se obvykle vztahují na výrobní vady po stanovenou dobu od data nákupu.

If you require technical assistance, have questions about operation, or need to inquire about replacement parts, please contact Breadman customer support. Contact details can usually be found on the manufacturer's webmístě nebo na obalu produktu.

When contacting support, please have your model number (TR520 / COMINHKR058410) and date of purchase readily available.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.