DiO Connected Home Wireless Switch Micro-module

Zavedení

This user manual provides detailed instructions for the installation, operation, and maintenance of your DiO Connected Home Wireless Switch Micro-module (Model Chacon 54700). This compact device allows you to transform any standard switch into a wireless remote control for various DiO receivers, including lighting modules, shutter modules, smart plugs, and smart bulbs. Please read this manual carefully before use to ensure proper functionality and safety.

Bezpečnostní informace

• Elektrická bezpečnost: Installation should only be performed by a qualified electrician or in strict accordance with local electrical codes. Ensure power is disconnected before any installation or maintenance.
• Pouze pro vnitřní použití: This device is designed for indoor use. Do not expose it to moisture, extreme temperatures, or direct sunlight.
• Baterie: The micro-module is battery-powered (3V CR2032). Ensure correct battery polarity when inserting. Do not attempt to recharge non-rechargeable batteries. Dispose of batteries responsibly.
• Kompatibilita: Only use this micro-module with compatible DiO 1.0 receivers.
• Děti: Uchovávejte zařízení a jeho součásti mimo dosah dětí.

Obsah balení

• 1x DiO Wireless Switch Micro-module (Chacon 54700)
• 4x Pre-wired cables (included for convenience)
• 1x Uživatelská příručka (tento dokument)

Image 1: The DiO Wireless Switch Micro-module, a compact grey device designed for integration behind a standard wall switch.

Konec produktuview

The DiO micro-module is a small, battery-powered transmitter that converts the action of a traditional wall switch into a wireless radio signal. This signal can then control any compatible DiO 1.0 receiver within a 50-meter range (in open field).

Obrázek 2: Detail view of the DiO micro-module, showing the S1 and S2 terminals for connecting to a wall switch, and the battery compartment.

• Kompaktní design: Fits easily behind most standard wall switches.
• Bezdrátové ovládání: Transmits radio signals (433.92 MHz) to DiO 1.0 receivers.
• Napájení z baterie: Uses a 3V CR2032 battery (not included).
• Duální vstup: Features S1 and S2 terminals for single or double switch configurations.

Instalace

The micro-module is designed for easy installation behind an existing wall switch. Ensure the main power supply to the circuit is turned OFF before proceeding with installation.

1. Prepare the Switch Box: Carefully remove your existing wall switch from its mounting box. Ensure there is sufficient space behind the switch for the micro-module (Dimensions: 14.4 x 10.9 x 2.5 cm).
2. Connect the Micro-module:
   • Connect the wires from your wall switch to the S1 and/or S2 terminals on the DiO micro-module.
   • For a single switch, use S1. For a double switch (e.g., two-way switch), use both S1 and S2.
   • Důležité: This micro-module is a transmitter and does not require connection to the 220V mains power. It is battery-operated. Do NOT connect it to the main electrical circuit.
3. Vložte baterii: Open the battery compartment on the micro-module and insert a 3V CR2032 battery, observing correct polarity.
4. Position the Module: Carefully place the micro-module into the wall switch box, ensuring wires are not pinched.
5. Znovu nainstalujte spínač: Mount your wall switch back into its position.
6. Obnovit napájení: Turn the main power supply back ON.

Image 3: Diagram illustrating the compact DiO micro-module being installed behind a standard wall switch, fitting within the wall box.

Image 4: Wiring diagram showing the DiO micro-module connected to a switch, emphasizing that it is battery-powered (CR2032 3V) and should not be connected to 220V mains.

Návod k obsluze

Once installed, the DiO micro-module acts as a wireless transmitter for your wall switch. It allows you to control any compatible DiO 1.0 receiver.

Pairing with DiO Receivers

To control a DiO receiver (e.g., a lighting module, smart plug, or shutter module), you must first pair the micro-module with the receiver. The pairing process typically involves:

1. Activate Learning Mode on Receiver: Refer to your DiO receiver's manual to put it into learning mode. This usually involves pressing a button on the receiver for a few seconds.
2. Send Pairing Signal: Within 10 seconds of activating learning mode on the receiver, press the wall switch connected to your DiO micro-module. The receiver should confirm successful pairing (e.g., by flashing a light or making a sound).
3. Test funkčnosti: Once paired, operate the wall switch to ensure it controls the receiver as expected (e.g., turn lights ON/OFF).

The micro-module supports ON/OFF functions and can be used to centralize control of multiple devices or activate specific scenarios within your DiO smart home system.

Údržba

• Čištění: Vnější povrch zařízení čistěte měkkým, suchým hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
• Výměna baterie: The micro-module is powered by a 3V CR2032 battery. When the battery is low, the transmission range or reliability may decrease. Replace the battery as needed. Ensure proper disposal of old batteries.
• Žádné díly opravitelné uživatelem: Do not attempt to open or repair the micro-module yourself. This will void the warranty.

Odstraňování problémů

• Zařízení nereaguje:
  • Check the battery in the micro-module. Replace if necessary.
  • Ensure the micro-module is correctly paired with the DiO receiver. Repeat the pairing process if unsure.
  • Verify that the DiO receiver is powered on and functioning correctly.
  • Check the distance between the micro-module and the receiver. Obstacles like thick walls or metal structures can reduce the wireless range.
• Přerušovaný provoz:
  • To může znamenat vybitou baterii. Vyměňte baterii CR2032.
  • Interference from other wireless devices operating on the same frequency (433.92 MHz) might occur. Try to minimize such interference.
• Switch Not Activating Module:
  • Ensure the wall switch is correctly wired to the S1/S2 terminals of the micro-module.

Specifikace

Záruka a podpora

This DiO Connected Home Micro-module comes with a manufacturer's warranty of 2 roky od data nákupu. Uschovejte si prosím doklad o koupi pro případné reklamace.

For technical support, troubleshooting assistance, or to explore other DiO Connected Home products, please visit the official CHACON brand store or contact their customer service.

Visit the CHACON Brand Store