Ranger Dylusions Ink Spray User Manual

1. Úvod

Welcome to your Ranger Dylusions Ink Spray. This concentrated colorant is designed for use on porous surfaces such as paper, canvas, wood, and clay. It is ideal for creating vibrant effects in scrapbooking, journal pages, and mixed media art.

2. Bezpečnostní informace

2.1 Obecná bezpečnost

• Uchovávejte mimo dosah dětí.
• Používejte na dobře větraném místě.
• Avoid direct contact with eyes. In case of contact, rinse immediately with plenty of water and seek medical advice.
• Nepožívejte. V případě požití okamžitě vyhledejte lékařskou pomoc a ukažte tento obal nebo štítek.
• Protect work surfaces as ink may stain.

2.2 Product Specific Warnings

This product conforms to ASTM D-4236 and is acid-free and non-toxic. However, it contains ingredients that may cause irritation in sensitive individuals. Always perform a patch test on an inconspicuous area if unsure.

3. Konec produktuview

The Ranger Dylusions Ink Spray is a 2 fl oz bottle of concentrated, vibrant ink. It is designed for easy application and blending on various porous surfaces.

3.1 Klíčové vlastnosti:

• Concentrated colorant for porous surfaces.
• Acid-free and non-toxic.
• Suitable for paper, canvas, wood, and clay.
• Ideal for mixed media, journaling, and scrapbooking.

4. Nastavení

4.1 Vybalení

Carefully remove the ink spray bottle from its packaging.

4.2 Příprava

Before first use, gently shake the bottle to ensure the pigment is evenly distributed. Ensure your work surface is protected with a craft mat or newspaper to prevent staining.

5. Návod k obsluze

5.1 Aplikační metody

• Direct Spray: Hold the bottle approximately 6-12 inches from your surface and press the nozzle to release a fine mist of color. Adjust distance for desired coverage and intensity.
• Waterbrush Application: Spray a small amount of ink onto a non-porous palette. Pick up the ink with a waterbrush or paintbrush and apply to your project.
• Vrstvení: Apply multiple layers of ink, allowing each layer to dry partially or completely for varied effects. Dylusions Ink Sprays react with water, allowing for blending and lifting techniques.

5.2 Doba schnutí

Drying time varies depending on the amount of ink applied, surface type, and environmental humidity. Allow adequate time for drying between layers to prevent smudging.

6. Údržba

6.1 Péče o trysky

After each use, it is recommended to clean the spray nozzle to prevent clogging. Unscrew the nozzle and rinse it under warm water until clear. You may also spray warm water through the nozzle until it runs clear.

6.2 Skladování

Store the ink spray bottle upright in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the cap is tightly closed to prevent drying.

7. Řešení problémů

7.1 Clogged Nozzle

If the nozzle becomes clogged, remove it from the bottle and soak it in warm water for 15-30 minutes. Use a thin wire or needle to clear any blockages. Rinse thoroughly before reattaching.

7.2 Uneven Spray

Ensure the bottle has been shaken well before use. If the spray remains uneven, clean the nozzle as described above.

7.3 Ink Not Drying

Ensure you are applying thin layers and allowing sufficient drying time. Increase ventilation in your workspace if necessary.

8. Specifikace

9. Záruka a podpora

For information regarding warranty or product support, please contact Ranger customer service directly. Refer to the product packaging for contact details or visit the official Ranger webmísto.

Webmísto: www.rangerink.com