1-Light Clear Flat Glass Traditional Outdoor Wall Lantern Light

Zavedení

This instruction manual provides detailed guidance for the safe installation, operation, and maintenance of your new Progress Lighting Outdoor Wall Lantern. Please read all instructions carefully before beginning installation and retain this manual for future reference. Proper installation and care will ensure optimal performance and longevity of your lighting fixture.

Obrázek: Přední strana view of the 1-Light Clear Flat Glass Traditional Outdoor Wall Lantern Light in Antique Bronze finish.

Bezpečnostní informace

• VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Před instalací nebo servisem odpojte napájení jističem nebo pojistkovou skříní.
• All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring installations.
• Používejte pouze konektory s certifikací UL/cUL.
• This fixture is designed for outdoor use and is suitable for wet locations.
• Nepřekračujte maximální watttage specifikované pro danou žárovku.
• Během instalace používejte ochranné brýle a rukavice.

Obsah balení

Ověřte, zda jsou v balení obsaženy všechny níže uvedené díly:

• A. Fixture Body (1)
• B. Mounting Plate (1)
• C. Mounting Screws (2)
• D. Wire Connectors (3)
• E. Decorative Nuts (2)
• F. Glass Panels (4, pre-installed)

Specifikace

Image: Diagram showing the width (4.5 inches) and height (8 inches) of the wall lantern.

Průvodce instalací

Follow these steps for proper installation of your outdoor wall lantern. It is recommended to watch the accompanying video for visual guidance on sizing and placement.

Požadované nástroje:

• Šroubovák s křížovou hlavou
• Plochý šroubovák
• Odizolovače drátů
• Elektrická páska (volitelné)
• Ochranné brýle

Před instalací:

1. Vypnout napájení: Locate the circuit breaker or fuse box that supplies power to the light fixture location. Turn off the main power switch.
2. Rozbalit obsah: Carefully remove all components from the packaging. Keep the packaging materials until installation is complete to ensure no small parts are lost.
3. Review existing wiring: Ensure the existing electrical box is securely mounted and capable of supporting the fixture's weight.

Montáž svítidla:

1. Attach the mounting plate (B) to the electrical box using the mounting screws (C). Ensure the plate is level and secure.
2. Pull the electrical wires from the electrical box through the center hole of the mounting plate.

Připojení kabeláže:

1. Connect the bare copper ground wire from the fixture to the bare copper ground wire from the electrical box using a wire connector (D). If your electrical box has a ground screw, wrap the fixture's ground wire around it before connecting to the supply ground wire.
2. Connect the white (neutral) wire from the fixture to the white (neutral) wire from the electrical box using a wire connector (D).
3. Connect the black (hot) wire from the fixture to the black (hot) wire from the electrical box using a wire connector (D).
4. Ensure all wire connections are secure. Wrap electrical tape around the wire connectors for added insulation if desired.

Zajištění přípravku:

1. Carefully push all excess wiring into the electrical box.
2. Align the holes on the fixture body (A) with the threaded posts on the mounting plate (B).
3. Secure the fixture body to the mounting plate using the decorative nuts (E). Tighten firmly but do not overtighten.

Instalace žárovky:

1. Insert one medium base (E26) bulb (not included) into the socket. Do not exceed the maximum recommended wattage 100 wattu.

Obrázek: Boční view of the wall lantern with a clear incandescent bulb installed, showing the internal socket.

Sizing and Selection Guidance Video:

For additional guidance on selecting the appropriate size and mounting height for outdoor lighting fixtures, please watch the official Progress Lighting video below:

Video: An official Progress Lighting guide on sizing and selecting outdoor lighting fixtures, covering optimal placement for entryways, garages, and other outdoor areas.

Návod k obsluze

Once the fixture is securely installed and wired, restore power at the circuit breaker. The light fixture can then be operated using your wall switch or external control system (if applicable).

Údržba

• Čištění: Chcete-li zařízení vyčistit, vypněte napájení a nechte jej vychladnout. Otřete měkkým hadříkem.amp hadříkem. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla, protože by mohly poškodit povrchovou úpravu nebo sklo.
• Výměna žárovky: Ensure power is off before replacing the bulb. Allow the bulb to cool completely before touching. Replace with a new medium base (E26) bulb, not exceeding 100 Watts.
• Pravidelná prohlídka: Pravidelně kontrolujte těsnost všech spojů a montážních prvků.

Odstraňování problémů

Záruka a podpora

Progress Lighting products are manufactured to the highest standards and are backed by a limited warranty. For specific warranty details, technical support, or replacement parts, please visit the official Progress Lighting webnebo kontaktujte jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.

Pro více informací navštivte: Obchod s osvětlením Progress na Amazonu