Návod k obsluze třícestného kulového ventilu Belimo B330+AFRB24 CCV 1.25 palce

1. Úvod

This manual provides essential information for the proper installation, operation, and maintenance of the Belimo B330+AFRB24 Characterized Control Valve (CCV). This 1.25-inch, 3-way ball valve features a 19 Cv flow coefficient and is equipped with a 24V On/Off spring return actuator. Adherence to these instructions ensures optimal performance and longevity of the device.

This image displays the Belimo B330+AFRB24 1.25 inch 3-Way Ball Valve, featuring a silver-colored valve body with a 1.25-inch connection and an orange and gray spring return actuator mounted on top. The actuator includes electrical connections and a manual override lever.

2. Nastavení a instalace

Proper installation is crucial for the reliable operation of the Belimo B330+AFRB24 valve. Consult local codes and regulations before beginning installation.

2.1 Bezpečnostní opatření

• Ensure all power to the system is disconnected before installation or servicing.
• Používejte vhodné osobní ochranné prostředky (OOP).
• Instalaci by měl provádět kvalifikovaný personál.

2.2 Mechanická instalace

1. Mount the valve in an accessible location, ensuring sufficient space for maintenance and wiring.
2. Ensure the valve body is properly supported and aligned with the piping.
3. Connect the 1.25-inch pipe fittings to the valve ports. Ensure connections are leak-tight.
4. Observe flow direction indicators on the valve body, if present, to ensure correct installation within the system.

2.3 Elektrické zapojení

The B330+AFRB24 actuator operates on 24V power and uses an On/Off control signal.

• Connect the 24V power supply to the designated terminals on the actuator. Refer to the wiring diagram provided with the actuator for specific terminal assignments.
• Connect the On/Off control signal wires according to the system's control logic.
• Ujistěte se, že všechna elektrická připojení jsou bezpečná a izolovaná, aby se zabránilo zkratu.
• Ověřte napájení objtage matches the actuator's requirements (24V).

3. Návod k obsluze

The Belimo B330+AFRB24 valve is designed for On/Off control applications with a spring return safety function.

3.1 Ovládání zapnutí/vypnutí

• When power is applied to the actuator, the valve will drive to its open or closed position, depending on the wiring configuration.
• When power is removed, the spring return mechanism will automatically drive the valve to its pre-set fail-safe position (typically fully open or fully closed).

3.2 Ruční ovládání

The actuator may include a manual override lever or button. Consult the specific actuator documentation for instructions on how to manually position the valve in case of power failure or for testing purposes. Always ensure power is disconnected before attempting manual override.

4. Údržba

The Belimo B330+AFRB24 valve and actuator are designed for minimal maintenance. Regular inspection is recommended to ensure continued reliable operation.

• Periodically inspect the valve and actuator for any signs of leakage, corrosion, or physical damage.
• Check electrical connections for tightness and integrity.
• Ensure the valve operates smoothly through its full range of motion.
• Clean any accumulated dust or debris from the actuator housing to prevent overheating.

No lubrication or internal adjustments are typically required for the valve or actuator.

5. Řešení problémů

V následující tabulce naleznete běžné problémy a jejich možná řešení.

6. Specifikace

7. Záruka a podpora

For detailed warranty information, technical support, or service inquiries, please refer to the official Belimo website or contact your authorized Belimo distributor. Keep your purchase receipt for warranty claims.