Lexmark MS810n
Lexmark MS810n Monochrome Laser Printer User Manual
Model: MS810n
Zavedení
This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your Lexmark MS810n Monochrome Laser Printer. Designed for efficiency and reliability, this printer offers high-speed monochrome printing with advanced features for professional environments.
The Lexmark MS810n is equipped with 256 MB of upgradable memory and a fast dual-core processor, ensuring effortless printing of documents with graphics and images. Its network-ready capabilities make it suitable for various office setups.
Konec produktuview

Obrázek 1: Přední strana view of the Lexmark MS810n Monochrome Laser Printer, showcasinjeho kompaktní design a ovládací panel.
The Lexmark MS810n is a robust monochrome laser printer designed for high-volume printing. Key components include the paper input tray, output bin, control panel with LCD display, and various connectivity ports.
Klíčové vlastnosti:
- Vysokorychlostní černobílý tisk až 55 stran za minutu (ppm).
- Network-ready with Gigabit Ethernet connectivity.
- 800 MHz dual-core processor and upgradable memory for efficient processing.
- Maximum input capacity of up to 4400 sheets with optional trays.
- High-yield toner cartridges for reduced maintenance.
- Intuitivní LCD displej pro snadnou navigaci a ovládání.
Průvodce nastavením
1. Vybalení tiskárny
- Opatrně vyjměte tiskárnu z obalu.
- Odstraňte veškerý balicí materiál, pásky a ochranné fólie z vnější i vnitřní strany tiskárny.
- Umístěte tiskárnu na stabilní, rovný povrch s dostatečným větráním.
2. Installing the Toner Cartridge and Imaging Unit
The Lexmark MS810n requires both a toner cartridge and an imaging unit for operation. Ensure both are correctly installed.

Figure 2: Opening the top cover of the printer to access the toner cartridge and imaging unit bay, indicated by a green tab.
- Open the front access door or top cover of the printer.
- Insert the imaging unit into its designated slot until it clicks into place.
- Unpack the toner cartridge and gently shake it to distribute the toner.
- Insert the toner cartridge into the imaging unit until it locks securely.
- Zavřete kryt tiskárny.
3. Vkládání papíru
- Vytáhněte zásobník papíru až na doraz.
- Upravte vodítka papíru tak, aby odpovídala formátu vkládaného papíru.
- Vložte stoh papíru do zásobníku a ujistěte se, že je rovný a nepřesahuje rysku maximálního naplnění.
- Jemně zatlačte zásobník papíru zpět do tiskárny.
4. Připojení tiskárny
The MS810n supports Ethernet connectivity for network printing.
- Připojte jeden konec ethernetového kabelu k ethernetovému portu tiskárny.
- Connect the other end of the Ethernet cable to an active network port or router.
- Připojte napájecí kabel k tiskárně a poté do uzemněné elektrické zásuvky.
- Stisknutím tlačítka napájení zapněte tiskárnu.
5. Instalace ovladače
For optimal performance, install the latest printer drivers from the Lexmark official website. The printer is network-ready, allowing for easy integration into existing network infrastructures.
Návod k obsluze
Tisk dokumentů
- Ujistěte se, že je tiskárna zapnutá a připojená k síti.
- V počítači otevřete dokument, který chcete vytisknout.
- V nabídce aplikace vyberte možnost „Tisk“ (např. File > Tisk).
- Choose "Lexmark MS810n" from the list of available printers.
- Adjust print settings as needed (e.g., number of copies, paper source, print quality).
- Kliknutím na tlačítko „Tisk“ odešlete úlohu do tiskárny.
Pomocí ovládacího panelu
The LCD display and keypad allow for direct control over printer functions and settings.
- Use the arrow keys to navigate through menus.
- Stiskněte tlačítko OK tlačítko pro výběr možnosti.
- The Zadní tlačítko se vrátí na předchozí obrazovku.
- The Domov button returns to the main menu.
Direct USB Printing
The Lexmark MS810n features a USB port for direct printing from a USB flash drive.

Figure 3: A hand inserting a USB flash drive into the dedicated USB port located on the top surface of the printer, near the control panel.
- Insert a USB flash drive into the USB port on the front of the printer.
- The printer's display will prompt you to select a document to print.
- Procházejte files on the USB drive using the control panel.
- Select the desired document and confirm printing.
Údržba
Výměna tonerové kazety
When the toner level is low, the printer will display a message. Replace the toner cartridge to ensure continued print quality.
- Otevřete přední přístupová dvířka tiskárny.
- Grasp the handle of the old toner cartridge and pull it out.
- Unpack the new Lexmark toner cartridge. Gently shake it to distribute the toner.
- Insert the new cartridge into the imaging unit until it clicks into place.
- Zavřete přední přístupová dvířka.
Výměna zobrazovací jednotky
The imaging unit has a finite lifespan and will need replacement after a certain number of pages. The printer will notify you when replacement is due.
- Otevřete přední přístupová dvířka.
- Remove the toner cartridge from the imaging unit.
- Grasp the handle of the imaging unit and pull it out of the printer.
- Vybalte novou zobrazovací jednotku.
- Insert the new imaging unit into the printer until it clicks into place.
- Reinstall the toner cartridge.
- Zavřete přední přístupová dvířka.
Čištění tiskárny
- Otřete vnější povrch tiskárny měkkým,amp, hadřík nepouštějící vlákna.
- Nepoužívejte abrazivní čisticí prostředky nebo rozpouštědla.
- Periodically clean the paper path rollers if paper jams become frequent. Refer to the on-screen instructions or Lexmark support for detailed steps.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Tiskárna se nezapíná | Napájecí kabel není připojen; problém se zásuvkou | Ensure power cord is securely connected to printer and outlet. Test outlet with another device. |
| Uvíznutí papíru | Incorrect paper loading; Overfilled tray; Foreign objects in paper path | Remove jammed paper carefully. Ensure paper is loaded correctly and not overfilled. Check for and remove any foreign objects. |
| Špatná kvalita tisku | Low toner; Worn imaging unit; Incorrect print settings | Replace toner cartridge. Replace imaging unit if necessary. Adjust print quality settings in printer driver. |
| Printer not detected on network | Network cable disconnected; Incorrect IP settings; Firewall blocking connection | Verify Ethernet cable connection. Check printer's IP address and network settings. Temporarily disable firewall to test. |
| Chybové kódy na displeji | Specifický interní problém | Note the error code and refer to the Lexmark support website or contact technical support for specific solutions. |
Specifikace
| Funkce | Detail |
|---|---|
| Název modelu | MS810n |
| Technologie tisku | Laser (monochromatický) |
| Maximální rychlost tisku (černobíle) | 55 ppm |
| Maximální rozlišení tisku | 1200 x 1200 dpi |
| Procesor | 800 MHz dvoujádrový |
| Paměť (standardní/maximální) | 512 MB / 2.5 GB (upgradable) |
| Konektivita | Ethernet, USB 2.0 |
| Maximální vstupní kapacita listu | 4400 listů (s volitelnými zásobníky) |
| Podporované typy médií | Envelopes, Paper (plain), Transparencies |
| Podporované velikosti médií | Up to Legal (8.5 x 14 inch) |
| Typ zobrazení | LCD |
| Hmotnost položky | 52.2 libry |
| Rozměry produktu | 21 x 24.5 x 22 palce |
Záruka a podpora
Informace o záruce
The Lexmark MS810n Monochrome Laser Printer comes with a Omezená záruka. For specific terms and conditions, including duration and coverage details, please refer to the warranty documentation included with your product or visit the official Lexmark webmísto.
Technická podpora
For technical assistance, driver downloads, or further troubleshooting, please visit the official Lexmark support webweb. Obvykle tam najdete zdroje podpory, nejčastější dotazy a kontaktní informace na zákaznický servis.
Official Lexmark Support: www.lexmark.com/en_us/support
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.