1. Úvod
This manual provides detailed instructions for the safe installation, operation, and maintenance of your WAC Lighting TK-103LED Line Voltage Track Head with 8W GU10 LED Bulb. Please read all instructions carefully before installation and retain this manual for future reference. This product is designed for indoor use only.
2. Bezpečnostní informace
VAROVÁNÍ: Abyste snížili riziko požáru, úrazu elektrickým proudem nebo zranění osob, dodržujte prosím následující:
- Před instalací nebo servisem se ujistěte, že je jistič vypnutý.
- Veškeré elektrické připojení musí být v souladu s místními předpisy, vyhláškami nebo Národním elektrotechnickým předpisem (NEC). Pokud nejste obeznámeni se správným zapojením elektrických vodičů, poraďte se s kvalifikovaným elektrikářem.
- Neinstalujte toto svítidlo do vlhkého neboamp locations. This product is rated for dry locations only.
- Do not attempt to alter or modify the fixture. Any alterations may void the warranty and create a safety hazard.
- Návrh 65 Varování: Tento produkt může obsahovat chemikálie, o nichž je ve státě Kalifornie známo, že způsobují rakovinu a vrozené vady nebo jiné poškození reprodukce.
3. Konec produktuview
The WAC Lighting TK-103LED is a line voltage track head designed for use with 120V track systems. It features a durable formed metal construction with a polycarbonate track adaptor and includes an 8W GU10 LED bulb. The fixture offers versatile aiming with 350-degree horizontal rotation and 90-degree vertical tilt, allowing for precise light direction.
Obrázek 1: Rozměry produktu
This diagram illustrates the dimensions of the WAC Lighting TK-103LED track head. The fixture measures approximately 4 11/16 inches in height when pointed downwards, and 5 7/16 inches when angled. The base width is 3 1/16 inches. The track adapter section is 1 3/8 inches wide and 1 1/8 inches high. The light head itself is 2 5/8 inches deep.
4. Nastavení a instalace
This track head is designed for ceiling mount installation on 120V track systems. It is compatible with H, J/J2, and L track configurations. Ensure you have the correct track type for your installation.
4.1 Součásti zahrnuté v balení
- Track fixture (with pre-installed 8W GU10 LED bulb)
- Návod k instalaci
4.2 kroky instalace
- Vypnout napájení: Before beginning installation, ensure the power to the track system is completely OFF at the circuit breaker.
- Identify Track Type: Verify your track system is a 120V H, J/J2, or L type track. The track head adaptor is designed to fit these specific types.
- Insert Track Head: Align the track head adaptor with the track slot. Push the adaptor firmly into the track and twist it to lock it into place. Ensure the electrical contacts on the adaptor engage properly with the track conductors.
- Bezpečné upevnění: Tighten any aiming screws or locking mechanisms on the track adaptor to secure the fixture's position on the track.
- Obnovit napájení: Jakmile je svítidlo bezpečně nainstalováno, obnovte napájení jističem.
5. Provoz
5.1 Aiming the Light
The TK-103LED track head allows for flexible light direction. You can rotate the fixture 350 degrees horizontally and tilt it 90 degrees vertically to illuminate your desired area. Loosen the aiming screws slightly, adjust the fixture, and then re-tighten the screws to secure its position.
5.2 Stmívání
This fixture is designed for smooth and continuous dimming from 100% down to 1% when used with an electronic low voltage (ELV) dimmer. For optimal performance and to avoid flickering, ensure your dimmer switch is compatible with LED lighting and specifically with ELV dimming protocols.
6. Údržba
6.1 Čištění
To clean the fixture, ensure power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
6.2 Re-Lamping (Bulb Replacement)
The TK-103LED track head uses a GU10 LED bulb. While the included LED bulb has a long lifespan, it can be replaced if necessary. The fixture is designed for easy re-lamping from the front without the use of tools. To replace the bulb:
- Vypněte napájení svítidla jističem.
- Carefully grasp the decorative glass shade or the bulb itself and twist counter-clockwise to remove the GU10 bulb.
- Insert a new GU10 LED bulb by aligning the pins with the socket holes and twisting clockwise until secure.
- Obnovte napájení zařízení.
7. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Svítidlo nesvítí | No power to the track; Loose connection; Faulty bulb | Check circuit breaker; Ensure track head is properly seated and locked; Replace GU10 bulb. |
| Světlo bliká nebo svítí nepravidelně | Incompatible dimmer switch; Loose bulb connection | Ensure dimmer is an ELV LED compatible dimmer; Re-seat or replace GU10 bulb. |
| Fixture falls from track | Improper installation; Locking mechanism not engaged | Ensure track head adaptor is fully inserted and twisted to lock; Tighten all securing screws. |
8. Specifikace
- Značka: WAC osvětlení
- Číslo modelu: LTK-103LED-BK
- Barva: Černý
- Materiál: Aluminum (fixture), Glass (shade)
- Styl: L Track (compatible with H, J/J2 track types)
- Specifická použití: Pouze pro vnitřní použití
- Zdroj napájení: AC
- Světelný zdroj: LED
- Počet světelných zdrojů: 1
- svtage: 120 voltů
- Wattage: 8 wattů
- Základna žárovky: GU10
- Typ přepínače: Dimmer compatible (ELV LED)
- Jas: 470 lumenů
- Typ montáže: Stropní držák
- Rozměry položky (D x Š x V): 2.63" x 3.63" x 5.44" (Note: Height varies with aiming, refer to Figure 1 for detailed dimensions)
- Hmotnost položky: 4.32 unce
- UPC: 790576225050
9. Záruka a podpora
9.1 Záruka výrobce
WAC Lighting provides a warranty for this product: 5 years for functional components and 2 years for the finish. Please retain your proof of purchase for warranty claims.
9.2 Zákaznická podpora
For technical assistance, replacement parts, or warranty inquiries, please contact WAC Lighting customer support. Refer to the WAC Lighting webaktuální kontaktní informace naleznete na webu nebo na obalu produktu.