Zavedení
This manual provides essential information for the proper use and handling of the Brady B33-19-432 Rough Surface Polyester Label Roll. This product is designed for durable and reliable labeling on various surfaces, particularly rough or challenging textures. For optimal performance, please read these instructions carefully.
Klíčové vlastnosti
- Made from durable glossy white polyester with permanent acrylic adhesive.
- Labels are chemical, oil, and water resistant, ensuring longevity in harsh environments.
- UL Recognized for outdoor use on glass, thermoset polyester plastic, and polyvinyl fluoride plastic surfaces, supporting solar panel identification.
- CSA accepted, indicating compliance with Canadian standards.
- Service temperature range of -70 to 230° F (-56 to 110° C), suitable for extreme conditions.
Nastavení a instalace
The Brady B33-19-432 label roll is designed for use with compatible Brady label printers, specifically the BBP33 series. Refer to your printer's user manual for specific loading instructions.
- Ensure your Brady printer is powered off before loading the label roll.
- Open the printer's media compartment cover.
- Carefully place the B33-19-432 label roll onto the media supply spindle, ensuring the labels feed correctly into the printer's path. The image below shows a typical label roll setup.
- Close the media compartment cover securely.
- Power on the printer and allow it to calibrate the new media.
Figure 1: The Brady B33-19-432 label roll, showing its white polyester material wound around a black plastic spindle, ready for installation into a compatible label printer.
Provoz a aplikace
Tisk štítků
Once the label roll is loaded, use your Brady label design software (e.g., Brady Workstation) to create and print your desired labels. Ensure the correct label material type is selected in the software settings for optimal print quality and material recognition.
Používání štítků
For best adhesion, ensure the application surface is clean, dry, and free of dust, oil, or other contaminants. The B33-19-432 labels are designed for rough surfaces, but proper surface preparation is still crucial.
- Peel the printed label from its liner.
- Align the label carefully on the desired surface.
- Apply firm, even pressure across the entire label, working from the center outwards to remove any air bubbles.
Figure 2: A hand carefully applying a transparent label, featuring "TEMP. LOCATION" text and a barcode, onto a smooth, light grey surface. This demonstrates the application process for the label.
Figure 3: A hand applying a clear label, displaying a barcode and "A149" text, to the top surface of a grey power strip near its red power switch. This illustrates the label's versatility on different product surfaces.
Péče a skladování
To maintain the quality and adhesive properties of your Brady B33-19-432 label rolls, follow these storage guidelines:
- Store label rolls in their original packaging in a cool, dry place, away from direct sunlight and extreme temperatures.
- Avoid exposing labels to high humidity, which can affect the adhesive.
- Keep rolls free from dust and debris to prevent contamination of the adhesive surface.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Poor label adhesion | Surface not clean or dry; insufficient pressure during application; incorrect surface type. | Clean and dry the surface thoroughly. Apply firm, even pressure. Ensure the label is suitable for the specific surface material. |
| Print quality issues (fading, streaks) | Incorrect printer settings; worn printhead; incompatible ribbon. | Verify printer settings match the label type. Clean or replace the printhead as needed. Ensure you are using a compatible Brady ribbon. |
| Štítky se nepodávají správně | Improper roll loading; media guides not adjusted. | Refer to your printer manual for correct label loading. Adjust media guides to fit the label roll snugly. |
Specifikace produktu
| Atribut | Detail |
|---|---|
| Číslo modelu | B33-19-432 |
| Značka | Brady |
| Materiál | Glossy White Polyester |
| Typ lepidla | Permanent Acrylic |
| Chemická odolnost | Chemical, Oil, and Water Resistant |
| Servisní teplota | -70 až 230 ° C |
| Certifikace | UL Recognized (Outdoor Use), CSA Accepted |
| Rozměry balení | 8.4 x 6.6 x 6.5 palce |
| Hmotnost položky | 1.75 libry |
| Datum první dostupnosti | 8. října 2012 |
Záruka a podpora
Zásady vrácení
This product is subject to a 30-day return policy for refund or replacement, as per standard retail terms. Please retain your proof of purchase for any return or warranty claims.
Podpora výrobce
For technical assistance, product inquiries, or further support regarding the Brady B33-19-432 label roll, please contact Brady customer service directly. Visit the official Brady webstránky s kontaktními informacemi a dalšími zdroji.
Official Brady Webmísto: www.bradycorp.com