1. Úvod
This manual provides essential information for the safe and effective use of your XTERRA FS2.5 Elliptical Trainer. Please read all instructions carefully before assembly and operation. Retain this manual for future reference.

Image: A person exercising on the XTERRA FS2.5 Elliptical Trainer, demonstrating its full form and usage.
2. Důležité bezpečnostní informace
- Před zahájením jakéhokoli cvičebního programu se poraďte s lékařem.
- Během provozu udržujte děti a domácí zvířata mimo dosah zařízení.
- Umístěte eliptický trenažér na rovný a stabilní povrch.
- Před každým použitím se ujistěte, že jsou všechny šrouby a matice bezpečně utažené.
- Maximální nosnost uživatele: 300 lb (136 kg).
- Používejte pouze podle pokynů v této příručce.
3. Nastavení a montáž
3.1 Vybalení a kontrola součástí
Carefully remove all components from the packaging. Verify that all parts listed in the assembly guide (included with the product) are present. The package includes the elliptical trainer, assembly parts, and this manual.
3.2 Montáž
Follow the step-by-step instructions provided in the separate assembly manual. Ensure all connections are secure. Assembly typically requires two hours. It is recommended to have assistance during assembly.
3.3 Umístění a vyrovnání
Place the elliptical on a firm, level surface. Use the rear spin-out levelers to ensure the machine is stable and does not wobble. Adjust them by turning until all contact points are firm on the floor.

Image: A hand adjusting the rear spin-out leveler on the elliptical trainer to ensure stability.
3.4 Připojení napájení
Connect the 110V power adapter to the elliptical and then to a standard wall outlet. The power input port is typically located at the rear base of the machine.
3.5 Moving the Unit
The elliptical is equipped with front transport wheels for easy mobility. To move, carefully lift the rear of the unit and roll it to the desired location.
4. Návod k obsluze
4.1 Konzole přesview
The XTERRA FS2.5 features a large 5-inch x 2.5-inch dual-color backlit LCD display. This display shows workout data such as time, distance, calories, speed, and heart rate. The console also includes an audio jack and speakers for connecting an MP3 player.

Obrázek: Podrobný view of the elliptical's console, highlighting the LCD screen, control buttons (Start, Stop, Up, Down, Mode, Enter, Recovery), and accessory tray.
4.2 Zahájení tréninku
- Step onto the oversized pedals.
- Grasp the moving handlebars or the fixed handlebars with pulse sensors.
- Stiskněte tlačítko START button to begin a manual workout, or select a program.
4.3 Workout Programs and Resistance
The FS2.5 offers 24 úrovní magnetického odporu and a variety of workout programs:
- 12 přednastavených programů
- 4 programy srdeční frekvence
- 1 program tělesného tuku
- 1 watt program
- 4 uživatelsky definovaných programů
- 1 target heart rate program
- Ruční program
Použijte UP a DOLŮ buttons to adjust resistance levels or navigate program selections. The elliptical can be used in both forward and reverse directions to engage different muscle groups.

Image: A person using the elliptical, with text indicating the availability of 24 different programs and 24 levels of resistance.
4.4 Monitorování srdeční frekvence
The elliptical includes hand grip pulse sensors on the fixed handlebars. Grasp these sensors during your workout to monitor your heart rate. A built-in receiver also supports a chest strap (not included) for continuous heart rate monitoring.

Image: Close-up of hands holding the hand grip pulse sensors on the elliptical's handlebars.
4.5 Ergonomie
The FS2.5 features an ergonomic 14-inch stride length for a comfortable motion. The oversized pedals provide a secure, non-slip surface during your workout.

Obraz: View of the elliptical's lower section, emphasizing the ergonomic 14-inch stride length and pedal design.

Obrázek: Podrobný view of the oversized foot pedals, designed for a secure, non-slip surface.
5. Údržba
The XTERRA FS2.5 Elliptical Trainer is designed for low maintenance due to its friction-free magnetic resistance system and sealed premium bushings. Regular maintenance helps ensure longevity and optimal performance.
- Čištění: Otřete stroj reklamouamp Po každém použití setřete hadříkem, abyste odstranili pot a prach. Nepoužívejte abrazivní čisticí prostředky.
- Inspekce: Periodically inspect all bolts, nuts, and moving parts for tightness. Tighten any loose fasteners.
- Mazání: While the magnetic resistance system is maintenance-free, some pivot points may benefit from occasional lubrication with a silicone-based lubricant if squeaking occurs. Refer to the assembly manual for specific pivot points.
6. Řešení problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Vrzání nebo neobvyklé zvuky | Loose bolts or lack of lubrication at pivot points. | Inspect and tighten all assembly bolts, especially those connecting the console to the lower frame. Apply silicone lubricant to pivot points if necessary. |
| Belt slipping or dislodging | Improper belt tension or internal component issue. | Refer to the assembly manual for instructions on adjusting belt tension. If the issue persists, contact customer support. |
| Console not powering on or displaying correctly | Power adapter not connected, loose wiring, or power outlet issue. | Ensure the 110V power adapter is securely plugged into the elliptical and a working wall outlet. Check all console wiring connections for looseness. |
| Machine feels unstable or wobbly | Uneven floor surface or unadjusted levelers. | Adjust the rear spin-out levelers until the machine is stable on the floor. Ensure the elliptical is placed on a flat surface. |
7. Specifikace
- Model: FS2.5
- Značka: XTERRA
- Product Dimensions (LWH): 51 x 24 x 63 palce (129.54 x 60.96 x 160.02 cm)
- Hmotnost ve složení: 103.6 lb (46.9 kg)
- Maximální nosnost uživatele: 300 lb (136 kg)
- Délka kroku: 14 palců
- Hmotnost setrvačníku: 22 liber
- Odporový systém: Magnetický
- Úrovně odolnosti: 24
- Zobrazit: 5-inch x 2.5-inch Dual Color Backlit LCD
- programy: 24 (12 preset, 4 HR, 1 body fat, 1 watt, 4 user-defined, 1 target HR, manual)
- Monitorování srdeční frekvence: Hand grip pulse sensors, built-in receiver for chest strap (not included)
- Požadavek na napájení: 110V AC
- Materiál: Heavy duty steel frame with metallic black powder coated rustproof finish

Image: A diagram illustrating the assembled dimensions of the XTERRA FS2.5 Elliptical Trainer: 51 inches (length), 24 inches (width), and 63 inches (height).
8. Informace o záruce
The XTERRA FS2.5 Elliptical Trainer comes with the following limited warranty:
- Rám: 5 roky
- Části: 1 rok
For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official XTERRA Fitness webmísto.
9. Zákaznická podpora
If you have any questions, require assistance with assembly, operation, or troubleshooting, or need to claim warranty service, please contact XTERRA Fitness customer support. You can typically find contact information on the XTERRA Fitness webwebu nebo v dokumentaci dodané s vaším produktem.
Pro více informací navštivte XTERRA Store on Amazon.