D-Link GO-SW-8G

D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch

Uživatelská příručka

Zavedení

The D-Link GO-SW-8G is an 8-port unmanaged Gigabit desktop switch designed for small office and home office (SOHO) environments. This device facilitates network expansion by providing eight 10/100/1000 Mbps Ethernet ports, enabling high-speed data transfer for connected devices. It incorporates D-Link's Green Technology for energy efficiency, reduced heat generation, and extended product lifespan.

Nastavení

Obsah balení

Ověřte, zda váš balíček obsahuje následující položky:

  • GO-SW-8G device
  • Napájecí adaptér

Připojení přepínače

The GO-SW-8G is a plug-and-play device, requiring no software configuration for basic operation. Follow these steps to set up your switch:

  1. Připojení napájení: Connect the provided power adapter to the power input port on the rear panel of the GO-SW-8G switch and then plug the adapter into a standard electrical outlet.
  2. Připojení síťového zařízení: Connect Ethernet cables from your network devices (e.g., computers, network-attached storage, routers) to any of the eight available RJ45 ports on the GO-SW-8G switch. The switch supports auto MDI/MDIX, so you can use either straight-through or crossover Ethernet cables.
  3. Ověření: Once connected, the corresponding LED indicator for each active port will illuminate, indicating a successful link.
D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch

Image: D-Link GO-SW-8G 8-Port Unmanaged Gigabit Desktop Switch. This image displays the compact white design of the switch with its multiple Ethernet ports and power input.

Provozní

The D-Link GO-SW-8G operates as an unmanaged switch, meaning it requires no user configuration for its core functions. It automatically detects network speed and duplex mode for each connected device, providing optimal performance. The Gigabit Ethernet ports support data transfer rates of up to 1000 Mbps, facilitating fast communication within your local network.

LED indikátory

The switch features LED indicators for each port and for power. These indicators provide visual feedback on the status of the switch and its connections:

  • LED napájení: Svítí, když je spínač zapnutý.
  • LED diody propojení/aktivitu (na port):
    • Svítí zelená: Indicates a successful network link at Gigabit speed (1000 Mbps).
    • Pevný jantar: Indicates a successful network link at Fast Ethernet speed (10/100 Mbps).
    • Bliká: Indicates network activity (data transmission or reception) on that port.
    • Vypnuto: No link detected or device is not powered on/connected.

Údržba

To ensure optimal performance and longevity of your D-Link GO-SW-8G switch, follow these general maintenance guidelines:

  • Umístění: Place the switch in a well-ventilated area to prevent overheating. Avoid direct sunlight and heat sources.
  • Čištění: K čištění vnější strany spínače použijte měkký, suchý hadřík. Nepoužívejte tekuté ani aerosolové čisticí prostředky.
  • Správa kabelů: Ujistěte se, že síťové kabely jsou úhledně uspořádané a nejsou nadměrně ohnuté ani napjaté.
  • Napájení: Používejte pouze napájecí adaptér dodaný se zařízením.

Odstraňování problémů

If you encounter issues with your D-Link GO-SW-8G switch, refer to the following common troubleshooting steps:

  • Bez napájení:
    • Ujistěte se, že je napájecí adaptér bezpečně připojen k přepínači a k ​​funkční elektrické zásuvce.
    • Zkontrolujte, zda je zásuvka funkční, zapojením jiného zařízení.
  • Kontrolka bez propojení:
    • Verify that the Ethernet cable is securely plugged into both the switch port and the network device.
    • Ujistěte se, že připojené síťové zařízení je zapnuté a funguje správně.
    • Zkuste jiný ethernetový kabel, abyste vyloučili jeho závadu.
    • Vyzkoušejte to s jiným portem na přepínači.
  • Pomalá rychlost sítě:
    • Confirm that all connected devices and cables support Gigabit Ethernet (1000 Mbps) for optimal performance.
    • Zkontrolujte, zda na připojených zařízeních neběží nadměrný síťový provoz nebo aplikace náročné na šířku pásma.
    • Ensure the switch is placed in an area with adequate ventilation to prevent performance degradation due to overheating.

Specifikace

ZnačkaD-Link
Číslo modeluGO-SW-8G/B
Počet portů8
Rychlost přenosu dat1000 megabajtů za sekundu (gigabit)
Typ přepínačeNeřízená
RozhraníRJ45
Kompatibilní zařízeníPC, Mac
svtage5 voltů
Typ materiálu pouzdraPlast
Hmotnost položky0.3 libry

Informace o záruce

The D-Link GO-SW-8G switch comes with a 3letá omezená záruka. For detailed terms and conditions, please refer to the warranty card included with your product or visit the official D-Link webmísto.

Podpora

For technical support, product registration, or to download the latest firmware and documentation, please visit the official D-Link support website. You can typically find support resources by searching for your product model (GO-SW-8G) on their site.

Oficiální D-Link Webmísto: www.dlink.com

© 2023 D-Link Corporation. Všechna práva vyhrazena.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.