RAB Lighting FFLED39

RAB Lighting FFLED39 Future Flood LED Light User Manual

Model: FFLED39

1. Konec produktuview

The RAB Lighting FFLED39 Future Flood LED Light is a high-performance, energy-efficient outdoor floodlight designed for various applications. This hardwired fixture features a durable bronze finish and provides cool white illumination.

RAB Lighting FFLED39 Future Flood LED Light

Figure 1: RAB Lighting FFLED39 Future Flood LED Light

Klíčové vlastnosti:

  • Moc: 39wattová LED
  • Teplota barev: Studená bílá 5100 XNUMX K
  • Životnost: 100,000 hours based on LM-80 tests
  • LED diody: Three multi-chip 13-watt high-performance LEDs
  • Optika: NEMA type 7H x 6V with Air-flow technology heatsink
  • Reflektor: Semi-specular anodized aluminum
  • Těsnění: Vysokoteplotní silikon
  • Dokončit: Bronze chip and fade-resistant polyester powder coat
  • svtage: 120-volt to 277-volt operation

2. Bezpečnostní informace

Před instalací a provozem si pečlivě přečtěte všechny pokyny. Nedodržení těchto pokynů může vést k úrazu elektrickým proudem, požáru nebo jiným nebezpečím. Uschovejte si tento návod pro budoucí použití.

  • Elektrická bezpečnost: Installation must be performed by a qualified electrician in accordance with all national and local electrical codes. Ensure power is disconnected at the circuit breaker before installation or servicing.
  • Základy: The fixture must be properly grounded to prevent potential electric shock.
  • Montáž: Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight (approximately 10.23 lbs).
  • Provozní teplota: Do not operate the fixture outside its specified temperature range.
  • LED diody: Do not stare directly into the LED light source when the fixture is operating, as this may cause eye damage.

3. Instalace

This floodlight is designed for wall mounting and requires hardwired installation. Professional installation is recommended.

Požadované nástroje:

  • Šroubovák (Phillips a plochý)
  • Kleště pro odizolování
  • Kleště
  • Drill (if mounting surface requires pilot holes)
  • Nastavitelný klíč

Možnosti montáže:

The FFLED39 supports various mounting options. The standard fixture comes with a wall mount. Optional accessories may include slipfitter mounts or other specialized brackets.

Slipfitter mount for RAB Lighting FFLED39

Obrázek 2: Přample of a Slipfitter Mount (optional accessory)

Kroky instalace:

  1. Odpojit napájení: Turn off power at the circuit breaker before beginning installation. Verify power is off using a voltage tester.
  2. Připravte montážní povrch: Securely attach the mounting bracket to the desired wall location. Ensure the bracket is level and firmly fastened.
  3. Kabelová připojení:
    • Connect the black wire from the fixture to the hot (L) wire from the power supply.
    • Connect the white wire from the fixture to the neutral (N) wire from the power supply.
    • Connect the green or bare copper wire from the fixture to the ground wire from the power supply.
    • Use appropriate wire connectors and ensure all connections are secure.
  4. Montážní přípravek: Attach the FFLED39 fixture to the mounting bracket. Secure it with the provided screws or bolts.
  5. Upravit cíl: Loosen the adjustment screws on the fixture to aim the light as desired. Tighten the screws firmly once the desired angle is achieved.
  6. Obnovit napájení: Turn on power at the circuit breaker. Test the fixture for proper operation.

4. Provoz

The RAB Lighting FFLED39 is a hardwired floodlight. Its operation is typically controlled by an external switch or a photocell (if installed).

Standardní provoz:

  • Once installed and wired, the fixture will illuminate when power is supplied via the connected wall switch or control system.
  • Ensure the power source is within the specified 120-277V range.

Photocell Control (Optional):

If a photocell is integrated or installed with the fixture, the light will automatically turn on at dusk and off at dawn, based on ambient light levels.

Photocell for automatic light control

Obrázek 3: Přample of a Photocell (optional accessory)

5. Údržba

The FFLED39 LED floodlight is designed for minimal maintenance due to its long-life LED components and durable construction.

Čištění:

  • Vnější: Pravidelně čistěte vnější povrch svítidla měkkým hadříkemamp hadříkem odstraňte nečistoty, prach a nečistoty. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
  • Čočka: Gently wipe the lens with a clean, soft cloth to ensure maximum light output.

Inspekce:

  • Pravidelně kontrolujte, zda svítidlo nevykazuje známky poškození, uvolněných spojů nebo opotřebení.
  • Ensure all mounting hardware remains tight and secure.
  • If any damage is observed, disconnect power and contact a qualified electrician for repair or replacement.

6. Řešení problémů

If you experience issues with your FFLED39 floodlight, refer to the following troubleshooting guide:

ProblémMožná příčinaŘešení
Světlo se nerozsvítí
  • Zařízení není napájeno
  • Uvolněné připojení kabeláže
  • Faulty switch or circuit breaker
  • Photocell malfunction (if applicable)
  • Zkontrolujte jistič a nástěnný vypínač.
  • Zkontrolujte, zda jsou všechna kabelová připojení bezpečná (nejprve se ujistěte, že je vypnuto napájení).
  • Test switch/breaker; replace if faulty.
  • Inspect photocell for obstructions or damage; replace if necessary.
Světlo bliká nebo ztmavne
  • Nestabilní napájení
  • Uvolněné vedení
  • Incompatible dimmer (if used)
  • Poraďte se s elektrikářem, aby zkontroloval stabilitu napájení.
  • Zkontrolujte a dotáhněte všechny kabelové spoje.
  • Ujistěte se, že použitý stmívač je kompatibilní s LED svítidly.
Světlo zůstává svítit během dne
  • Photocell obstructed or faulty
  • Incorrect wiring of photocell
  • Odstraňte všechny překážky z fotobuňky.
  • Verify photocell wiring according to its instructions. Replace if faulty.

If the problem persists after following these steps, contact RAB Lighting customer support or a qualified electrician.

7. Specifikace

Detailed technical specifications for the RAB Lighting FFLED39 Future Flood LED Light:

SpecifikaceHodnota
Číslo modeluFFLED39
ZnačkaOsvětlení RAB
Wattage39 wattů
svtage120-277 voltů
Světelný zdrojLED
Světlá barvaStudená bílá
Teplota barev5100 Kelvinů
Jas15000 XNUMX lumenů
Vnitřní/venkovní použitíVenkovní
Typ montážeDržák na zeď
MateriálHliník, Plast
Typ dokončeníBronz
Rozměry položky (D x Š x V)11 cm D x 7.5 cm Š x 10 cm V
Hmotnost položky10.23 libry
Úroveň odolnosti proti voděVodě odolný
Životnost100,000 hodin
100,000-hour LED lifespan icon

Figure 4: Indication of 100,000-hour LED lifespan

8. Záruka a podpora

Záruka výrobce:

The RAB Lighting FFLED39 Future Flood LED Light is covered by a 1letá záruka výrobce od data nákupu. Tato záruka se vztahuje na vady materiálu a zpracování při běžném používání a servisu.

The warranty does not cover damage resulting from improper installation, accident, misuse, abuse, negligence, or unauthorized modification or repair.

Zákaznická podpora:

For technical assistance, warranty claims, or further information, please contact RAB Lighting customer support. Refer to the official RAB Lighting webstránky s aktuálními kontaktními údaji.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.