Logilink CV0055

Uživatelská příručka pro kabel DisplayPort-HDMI Logilink CV0055

Model: CV0055 | Brand: Logilink

1. Úvod

This user manual provides essential information for the correct installation, operation, and care of your Logilink CV0055 DisplayPort to HDMI Cable. Please read this manual thoroughly before use to ensure optimal performance and longevity of the product.

2. Konec produktuview

The Logilink CV0055 is a 2-meter white cable designed to connect a device with a DisplayPort output to a display device with an HDMI input. It features gold-plated connectors for reliable signal transmission and supports resolutions up to 1920 x 1080 pixels (Full HD).

Logilink CV0055 DisplayPort to HDMI Cable showing both connectors

Popis obrázku: A white Logilink CV0055 cable with a DisplayPort connector on the right and an HDMI connector on the left. Both connectors feature gold-plated contacts, highlighting the cable's design and connection types.

Klíčové vlastnosti:

  • Typ konektoru: DisplayPort Male (20-pin) to HDMI Male (19-pin)
  • Délka kabelu: 2 metrů
  • Barva: Bílý
  • Podpora rozlišení: Až 1920 x 1080 pixelů (Full HD)
  • Konektory: Gold-plated for enhanced signal integrity
  • Rychlost přenosu dat: Až 10.8 gigabitů za sekundu

3. Pokyny k nastavení

Follow these steps to connect your DisplayPort-enabled device to an HDMI display:

  1. Ensure both your source device (e.g., computer) and your display device (e.g., monitor, TV) are powered off.
  2. Locate the DisplayPort output on your source device. This port is typically rectangular with one corner angled.
  3. Connect the DisplayPort end of the Logilink CV0055 cable to the DisplayPort output on your source device. Ensure it clicks securely into place.
  4. Locate an available HDMI input on your display device. This port is typically trapezoidal.
  5. Connect the HDMI end of the Logilink CV0055 cable to the HDMI input on your display device.
  6. Power on your display device, then power on your source device.
  7. Select the correct HDMI input source on your display device using its remote control or on-screen menu.
Diagram showing connection from PC with DisplayPort output to Monitor/TV with HDMI input

Popis obrázku: A schematic diagram illustrating the connection flow. A computer with a DisplayPort (DP) output is shown on the left, connected via the cable to a monitor/TV with an HDMI input on the right. Arrows indicate the signal direction from DP to HDMI.

4. Návod k obsluze

Once the cable is connected as described in the setup section, your DisplayPort source device should automatically detect the HDMI display. If the display does not appear or is not at the desired resolution, follow these steps:

  • Nastavení obrazovky: On your computer, navigate to the display settings (e.g., Windows: Right-click desktop > Display settings; macOS: System Preferences > Displays). Ensure the external display is detected and configured correctly (e.g., extend, duplicate).
  • Zvukový výstup: If you are not getting audio through your HDMI display, check your computer's sound settings. Select the HDMI output as the default audio device.
  • Rezoluce: The cable supports up to 1920 x 1080 pixels. If your display is set to a higher resolution, it may not display correctly. Adjust the resolution in your source device's display settings.

5. Údržba

To ensure the longevity and optimal performance of your Logilink CV0055 cable, observe the following maintenance guidelines:

  • Skladování: Kabel skladujte na chladném a suchém místě mimo dosah přímého slunečního záření a extrémních teplot.
  • Zacházení: Avoid bending or kinking the cable sharply, as this can damage internal wires. Always grasp the connector housing when plugging or unplugging, not the cable itself.
  • Čištění: V případě potřeby kabel a konektory jemně otřete měkkým, suchým hadříkem, který nepouští vlákna. Nepoužívejte tekuté čisticí prostředky ani rozpouštědla.
  • Ochrana: Keep connectors free from dust and debris. Consider using dust caps if the cable is stored or not in use for extended periods.

6. Řešení problémů

If you encounter issues with your Logilink CV0055 cable, refer to the following common problems and solutions:

ProblémMožné řešení
Žádný obrázek na displeji.
  • Ujistěte se, že jsou obě zařízení zapnutá.
  • Verify the cable is securely connected at both ends.
  • Check that the correct HDMI input source is selected on your display.
  • Zkuste restartovat zdrojové zařízení i displej.
  • Test with another DisplayPort to HDMI cable if available to rule out cable fault.
Z displeje není slyšet žádný zvuk.
  • Check your source device's audio settings and ensure HDMI output is selected.
  • Increase the volume on both your source device and display.
Blikající nebo zkreslený obraz.
  • Ujistěte se, že jsou kabelová připojení pevná.
  • Reduce the display resolution on your source device.
  • Zkontrolujte, zda kabel nebo konektory nejsou fyzicky poškozené.

7. Specifikace

AtributDetail
Název modeluCV0055
ZnačkaLogilink
Typ konektoruDisplayPort (Male) to HDMI (Male)
Typ kabeluHDMI
Délka kabelu2 metrů
BarvaBílý
Maximální rozlišení1920 x 1080 pixelů (Full HD)
Rychlost přenosu dat10.8 Gigabit za sekundu
Pohlaví konektoruMuž k muži
Počet kolíků20 (DisplayPort) / 19 (HDMI)
Kompatibilní zařízeníComputers, Audio/Video Devices with DisplayPort output and HDMI input
Vnější materiálPlast

8. Záruka a podpora

For warranty information and technical support regarding your Logilink CV0055 DisplayPort to HDMI Cable, please refer to the documentation provided at the time of purchase or visit the official Logilink webUschovejte si doklad o koupi pro případ reklamace.

Výrobce: LogiLink

Webmísto: www.logilink.eu

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.