1. Úvod
This manual provides detailed instructions for the installation, operation, and maintenance of your Alpine SWR-12D2 Type-R 12-inch Subwoofer. Please read this manual thoroughly before use to ensure proper setup and optimal performance. The Alpine SWR-12D2 is a high-performance car audio subwoofer designed to deliver powerful and accurate bass reproduction.
2. Bezpečnostní informace
VAROVÁNÍ: Failure to follow these safety instructions may result in fire, electric shock, or other injury or damage.
- Před zahájením jakékoli instalace vždy odpojte záporný pól baterie vozidla.
- Ujistěte se, že veškeré vedení je řádně izolováno a zajištěno, aby se zabránilo zkratům a poškození.
- Nevystavujte subwoofer vlhkosti ani extrémním teplotám.
- Install the subwoofer in a secure location where it will not interfere with vehicle operation or passenger safety.
- Use appropriate gauge wiring for power and speaker connections as recommended by amplifier and subwoofer specifications.
- Excessive sound pressure levels can cause permanent hearing loss. Operate audio systems at moderate levels.
3. Obsah balení
Ověřte, zda jsou v balení přítomny všechny položky:
- Alpine SWR-12D2 12-inch Subwoofer
- Drátové konektory
- Uživatelská příručka (tento dokument)
4. Nastavení a instalace
4.1 Pokyny pro montáž
The Alpine SWR-12D2 subwoofer requires a suitable enclosure for optimal performance. Ensure the enclosure dimensions accommodate the subwoofer's physical requirements.
- Montážní hloubka: 6-3/8 palce (16.2 cm)
- Průměr výřezu: 10-7/8 palce (27.6 cm)
- Rozměry produktu: 8.7"D x 4"W x 7.1"H (approximate, refer to detailed specifications for exact measurements)
Secure the subwoofer firmly within the enclosure using appropriate fasteners. Ensure no air leaks around the mounting surface.
4.2 Wiring the Subwoofer
The SWR-12D2 features dual 2-ohm voice coils, offering flexible wiring options to match your ampPožadavky na impedanci zhášeče. Mezi běžné konfigurace patří:
- 1-ohm Parallel Wiring: Spojte kladné póly obou kmitací cívek dohromady a záporné póly obou kmitací cívek dohromady. Poté připojte spojený kladný pól k... ampkladný výstup lifiera a kombinovaný negativní pro amplifier's negative output. This results in a 1-ohm load.
- 4-ohm Series Wiring: Připojte kladný pól jedné kmitací cívky k zápornému pólu druhé kmitací cívky. Poté připojte zbývající kladný pól k ampkladný výstup zkratovacího zdroje a zbývající záporný pól k amplifier's negative output. This results in a 4-ohm load.
Always refer to your amplifier's manual for compatible impedance loads and wiring recommendations. Use high-quality speaker wire of adequate gauge for all connections.
4.3 AmpVýběr zvlhčovače
Vyberte an amplifier that can provide sufficient power within the subwoofer's RMS power handling range and match the impedance. The SWR-12D2 has a recommended RMS power handling of 300-1000 Watts.
- Manipulace s výkonem RMS: 300-1000 Wattů
- Špičkový výkon: 3000 wattů
- Nominální impedance: Duální 2 Ohmy
An amplifier providing approximately 1000 Watts RMS at the chosen impedance (1-ohm or 4-ohm) is ideal for maximizing performance without risking damage.
5. Provoz
5.1 Initial Power-Up and Break-in
After installation, perform an initial power-up at low volume levels. Gradually increase the volume to ensure all connections are secure and the subwoofer is functioning correctly. A break-in period of several hours of moderate use is recommended to allow the subwoofer's suspension components to loosen and achieve optimal performance.
5.2 Tuning and Adjustment
Proper tuning of your amplifier and head unit settings is crucial for sound quality and subwoofer longevity.
- Nastavení zesílení: Upravte ampzesílení lifieru pro přizpůsobení výstupní hlasitostitage of your head unit. Avoid setting the gain too high, which can lead to clipping and damage.
- Nízkopropustný filtr (LPF): Nastavte LPF na vašem amplifier or head unit to filter out frequencies above the subwoofer's intended range, typically between 60 Hz and 100 Hz. The SWR-12D2 has a frequency response of 24 - 200 Hz.
- Subsonický filtr (HPF): If available, set a subsonic filter (high-pass filter for the subwoofer channel) to protect the subwoofer from playing extremely low frequencies below its resonant frequency, which can cause excessive excursion and damage. A setting around 25-30 Hz is often appropriate.
- Fázové řízení: Experiment with the phase setting (0° or 180°) on your amplifier or head unit to achieve the best blend with your front speakers.
6. Údržba
The Alpine SWR-12D2 subwoofer requires minimal maintenance to ensure long-term performance.
- Čištění: Periodically wipe the subwoofer cone and surround with a soft, dry cloth to remove dust and debris. Avoid using harsh chemicals or solvents.
- Ochrana: Consider installing a protective grill (sold separately) to prevent accidental damage to the subwoofer cone and surround, especially in vehicle installations where objects might come into contact with the speaker.
- Inspekce: Regularly inspect wiring connections for tightness and signs of corrosion or wear.
7. Řešení problémů
Pokud máte problémy se subwooferem, podívejte se na následující běžné problémy a jejich řešení:
| Problém | Možná příčina | Řešení |
|---|---|---|
| Žádný zvuk ze subwooferu |
|
|
| Zkreslené nebo nejasné basy |
|
|
| Přehřívání subwooferu |
|
|
Pokud problém přetrvává i po vyzkoušení těchto řešení, kontaktujte zákaznickou podporu Alpine nebo kvalifikovaného technika autoaudia.
8. Specifikace
| Název modelu | SWR-12D2 (12D2) |
| Typ reproduktoru | Subwoofer |
| Doporučené použití | Audio do auta |
| Průměr subwooferu | 12 palce |
| Barva | Černý |
| Zahrnuté komponenty | Subwoofer, Wire Connectors |
| Rozměry produktu (D x Š x V) | 8.7 cm H x 4 cm Š x 7.1 cm V (přibližně) |
| Hmotnost položky | 17.6 liber (7.98 kg) |
| Nominální impedance | Duální 2 Ohmy |
| RMS Power Handling | 300-1000 Wattů |
| Špičkový výkon | 3000 wattů |
| Frekvenční odezva | 24 - 200 Hz |
| Citlivost | 84.7 dB |
| Montážní hloubka | 6-3/8 palce (16.2 cm) |
| Průměr výřezu | 10-7/8 palce (27.6 cm) |
| Hlasová cívka | 4-layer Dual Voice Coil |
| Surround materiál | Vysoký Amplitude Multi-Roll Santoprene |
| Kuželový materiál | Pulp/Kevlar |
| Materiál rámu | Litý hliník |
| Výrobce | ESE Electronics Inc -- Dropship (Alpine) |
| GTIN/UPC | 793276011794 |
9. Záruka a podpora
9.1 Omezená záruka
Alpine products are covered by a limited warranty. The specific terms and duration of the warranty may vary by region and product. Please refer to the warranty card included with your product or visit the official Alpine webpodrobné záruční informace.
This warranty typically covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, accident, misuse, abuse, neglect, unauthorized modification, or normal wear and tear.
9.2 Zákaznická podpora
For technical assistance, troubleshooting, or warranty claims, please contact Alpine customer support. You can find contact information and additional resources on the official Alpine webmísto:
When contacting support, please have your product model number (SWR-12D2) and proof of purchase readily available.