Interlink Torino Office Chair Instruction Manual

1. Úvod

Thank you for choosing the Interlink Torino Office Chair. This manual provides essential information for the safe assembly, operation, and maintenance of your new office chair. Please read these instructions carefully before assembly and retain them for future reference.

The Torino office chair is designed for comfort and functionality in a home or professional office environment. It features an anatomically shaped seat, an ergonomically designed backrest, and durable PVC and mesh materials for sustained use.

Image 1.1: The Interlink Torino Office Chair in a typical office environment.

2. Bezpečnostní informace

• Maximální nosnost: This chair is designed to support a maximum weight of 90 kg (approximately 198 lbs). Do not exceed this limit to prevent damage or injury.
• Shromáždění: Assemble the chair on a soft, clean surface to prevent scratching. Ensure all screws and bolts are tightened securely before use. Periodically check and re-tighten fasteners.
• Používání: Židli používejte pouze k určenému účelu. Nestůjte na židli ani ji nepoužívejte jako schůdky.
• Děti: Keep small parts away from children during assembly. This chair is intended for adult use.
• Stabilita: Do not lean excessively to one side or the back to avoid tipping.

3. Obsah balení

Before beginning assembly, please verify that all components are present and undamaged. If any parts are missing or damaged, do not proceed with assembly. Contact customer support for assistance.

• 1x Seat Base
• 1x Opěrka zad
• 1x Gas Lift Cylinder
• 1x Star Base (with 5 arms)
• 5x Caster Wheels
• 2x područky
• 1x Mechanism Plate (under seat)
• Sada hardwaru (šrouby, podložky, imbusový klíč)
• Montážní návod (tento dokument)

4. Montážní návod

Assembly requires approximately 30-60 minutes. It is recommended to have two people for easier assembly, though one person can complete it.

1. Připevněte kolečka k hvězdicové základně: Insert each of the five caster wheels into the holes at the end of the star base arms. Push firmly until they click into place.
2. Vložte plynový zvedací válec: Vložte plynový zvedací válec do středového otvoru sestavené hvězdicové základny.
3. Připevnění desky mechanismu k sedadlu: Align the mechanism plate with the pre-drilled holes on the underside of the seat cushion. Ensure the lever is positioned correctly (usually on the right side when seated). Secure with screws provided in the hardware pack.
4. Připevnění loketních opěrek k sedáku a opěradlu: Secure the armrests to the sides of the seat cushion and the backrest using the provided screws. Do not overtighten initially; tighten fully once all screws are in place.
5. Connect Seat/Backrest Assembly to Gas Lift: Opatrně umístěte sestavené sedadlo a opěradlo na plynový zvedací válec a ujistěte se, že středový otvor desky mechanismu je zarovnán s horní částí plynového zvedáku. Pevně ​​zatlačte dolů pro zajištění.

Image 4.1: Dimensional diagram of the assembled chair.

5. Návod k obsluze

5.1. Nastavení výšky

Nastavení výšky sedáku (rozsah: 46–55 cm):

• Chcete-li zvednout sedadlo: While seated, lift the lever located on the right side of the chair (Image 5.1). The seat will rise automatically. Release the lever at the desired height.
• Pro snížení sedadla: While seated, lift the lever (Image 5.1) and apply slight body weight. The seat will lower. Release the lever at the desired height.
• To raise the seat without weight: Stand up and lift the lever. The seat will rise to its maximum height.

Image 5.1: Height adjustment mechanism.

5.2. Funkce naklápění a aretace

The chair features a tilt mechanism that allows the backrest and seat to recline together. The lever on the right side (Image 5.2) also controls the tilt lock.

• To unlock tilt: Pull the lever outwards from the chair. The chair will now allow for a rocking motion.
• To lock tilt: Push the lever inwards towards the chair. The chair will lock in its upright position.

Image 5.2: Tilt lock and height adjustment lever.

5.3. Pohyb

The five caster wheels allow for easy movement across hard floor surfaces. Ensure the floor is clear of obstructions before moving the chair.

6. Údržba

• Čištění: Otřete dočista s reklamouamp cloth. For stubborn stains on PVC or mesh, use a mild soap solution and dry thoroughly. Avoid abrasive cleaners or harsh chemicals.
• Spojovací materiál: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability and safety.
• Kolečka: Keep the caster wheels free of hair, dust, and debris to ensure smooth movement.
• Péče o materiál: The chair features durable PVC and mesh materials. Avoid prolonged exposure to direct sunlight to prevent fading or material degradation.

Image 6.1: Detail of PVC and mesh materials.

Image 6.2: Close-up of the mesh backrest and PVC headrest.

7. Řešení problémů

8. Specifikace

9. Záruka a podpora

For warranty information, please refer to the purchase documentation or contact your retailer. If you require technical support, have questions about assembly, or need replacement parts, please contact Interlink customer service through their official webna webu nebo u prodejce, kde byl produkt zakoupen.