Prosport 238SMBOSWL270-PK.PSI Boost Electrical Gauge User Manual

1. Úvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Prosport 238SMBOSWL270-PK.PSI Boost Electrical Gauge. This premium series gauge features a fully programmable warning function and peak recall ability, designed for precise monitoring of boost levels in supercharged or turbocharged vehicles. Its 270° LED display offers quick and accurate readings.

Obrázek 1: Přední strana view of the Prosport Boost Electrical Gauge, illuminated in red.

2. Komponenty produktu

The Prosport 238SMBOSWL270-PK.PSI Boost Electrical Gauge package includes the following components:

• Boost Electrical Gauge (60mm / 2 3/8")
• Mounting Cup
• Sada hadic
• T-Adaptér
• Electric Sender
• Quick Connect Pigtail Wiring
• Hledí
• Obtisk
• Návod k použití (tento dokument)

Figure 2: All included components: gauge, mounting cup, tubing, T-adaptor, sender, wiring, visor, and decal.

3. Nastavení a instalace

Proper installation is crucial for the accurate and safe operation of your boost gauge. It is recommended that installation be performed by a qualified professional.

3.1. Montáž měřidla

1. Select a suitable mounting location within the vehicle's cabin that allows for clear visibility and does not obstruct driving.
2. Utilize the provided mounting cup for secure installation. The gauge is designed to be super thin, requiring less than 1.25 inches behind the bezel (including studs), allowing for tight mounting options.
3. Secure the mounting cup firmly using appropriate hardware.

3.2. Elektrické připojení

The gauge operates on a 12V electrical system.

1. Connect the quick connect pigtail wiring to the gauge.
2. Wire the first gauge for power (12V ignition, ground, and illumination).
3. For multiple Prosport gauges, power can be daisy-chained from the first gauge to subsequent gauges using the provided daisy chain power leads.
4. Ujistěte se, že všechna připojení jsou bezpečná a řádně izolovaná, aby se zabránilo zkratu.

3.3. Sender Installation

The boost gauge uses a precision electric sender to measure boost pressure, eliminating the need to route hazardous fluids into the passenger compartment.

1. Identify a suitable vacuum/boost source on your vehicle's intake manifold or intercooler piping.
2. Install the T-Adaptor into the boost/vacuum line.
3. Connect the provided tubing kit from the T-Adaptor to the electric sender.
4. Mount the electric sender securely in a location away from excessive heat or vibration.
5. Connect the sender's wiring to the gauge's designated sender input.

4. Návod k obsluze

Your Prosport Boost Electrical Gauge is designed for ease of use and advanced functionality.

4.1. Sekvence zapnutí

Upon vehicle ignition, the gauge will perform a dramatic opening ceremony with a full pointer sweep, indicating a self-check and readiness for operation. A similar sweep will occur upon vehicle shutdown.

4.2. Reading the Gauge

The 270° dial sweep provides quick, at-a-glance accuracy of your current boost pressure, ranging from -30 inHg (vacuum) to +30 PSI (boost).

Figure 3: The gauge can display illumination in both amber and white colors.

4.3. Programmable Warning Function

The gauge features a fully programmable warning function to alert you when a pre-set boost limit is reached.

• Setting the Warning: All programming is done easily from the front push button on the gauge. Refer to the on-screen prompts or the detailed instructions provided with the gauge for specific steps to set your desired warning threshold.
• Upozornění: Once the pre-set limit is reached, the gauge can be programmed to either beep, change color, or both, providing an immediate visual and/or audible alert. This feature is critical for preventing over-boost conditions and protecting your turbocharger.

4.4. Peak Recall Function

The gauge includes a peak recall ability, allowing you to view the maximum boost pressure achieved during operation. This is useful for tracking performance and tuning adjustments.

• Accessing Peak Recall: Use the front push button to cycle through display modes until the peak recall value is shown. Consult the detailed instructions for specific button press sequences.

5. Údržba

The Prosport Boost Electrical Gauge is designed for durability and requires minimal maintenance.

• Čištění: Použijte měkký, damp cloth to clean the gauge face and body. Avoid abrasive cleaners or solvents that could damage the display or finish.
• Spojení: Periodically check all electrical and sender connections to ensure they remain secure and free from corrosion.

6. Řešení problémů

If you encounter issues with your Prosport Boost Electrical Gauge, consider the following:

• Měřidlo se nezapíná:
  • Check all electrical connections (power, ground, ignition) for proper contact and voltage.
  • Verify the vehicle's fuse for the accessory circuit is intact.
• Nepřesná čtení:
  • Ensure the electric sender is properly installed and connected.
  • Check the tubing for any kinks, leaks, or obstructions.
  • Verify the sender's wiring is secure and free from damage.
• Warning Function Not Activating:
  • Re-check the programmed warning threshold to ensure it is set correctly.
  • Confirm the gauge is receiving accurate boost pressure readings.

Další pomoc naleznete v části Záruka a podpora.

7. Specifikace

8. Záruka a podpora

8.1. Informace o záruce

The Prosport 238SMBOSWL270-PK.PSI Boost Electrical Gauge comes with a 1-letá záruka od data nákupu. Tato záruka se vztahuje na výrobní vady a zajišťuje, že výrobek bude fungovat tak, jak je popsáno, při běžném používání. Uschovejte si prosím doklad o koupi pro případné reklamace.

8.2. Zákaznická podpora

For technical assistance, troubleshooting, or warranty inquiries, please contact Prosport Gauges customer service.

Online podpora: Visit the official Prosport website for FAQs, additional resources, and contact information.

Kontakt: Refer to the contact details provided on the product packaging or the official Prosport Gauges webmísto.