Powell Heavy Metal Twin-Over-Twin Bunk Bed Instruction Manual

Zavedení

This manual provides detailed instructions for the assembly, use, and maintenance of your Powell Heavy Metal Twin-Over-Twin Bunk Bed. Please read all instructions carefully before assembly and retain this manual for future reference. The bunk bed is designed for durability and versatility, offering two twin-sized sleeping spaces within a compact footprint, or convertible into two separate twin beds.

Figure 1: Assembled Powell Heavy Metal Twin-Over-Twin Bunk Bed.

Důležité bezpečnostní informace

VAROVÁNÍ: Abyste předešli vážným nebo smrtelným zraněním způsobeným zachycením nebo pádem:

• Řiďte se informacemi o varováních na horním konci lůžka a na kartonu. Neodstraňujte varovný štítek z postele.
• Never allow a child under 6 years old on the upper bunk.
• Vždy používejte doporučenou velikost matrace nebo podpěry matrace nebo obojího, abyste předešli pravděpodobnosti zachycení nebo pádu.
• Use only a mattress which is 74"- 75" long and 37-1/2"- 38-1/2" wide on the bunk.
• Ensure thickness of mattress does not exceed 8" and surface of mattress is at least 5" below upper edge of guardrails.
• Vždy používejte zábradlí na obou dlouhých stranách horního lůžka.
• If bunk bed will be placed next to a wall, the guardrail that runs the full length of the bed should be placed against the wall to prevent entrapment between the bed and the wall.
• Prohibit horseplay on or under bed(s) and prohibit jumping on the bed.
• Zakázat více než jednu osobu na horní palandě.
• Use ladder for entering and leaving upper bunk.
• Maximum total weight is not to exceed 300 lbs. on the upper bunk.
• Pravidelně kontrolujte a ujistěte se, že zábradlí, žebřík a další součásti jsou ve správné poloze, nejsou poškozené a že jsou všechny konektory utaženy.
• Do not use substitute parts. Replacement parts, including additional guardrails, may be obtained from our customer service department.
• Use of water or sleep flotation mattresses is prohibited.
• Použití nočního světla může poskytnout další bezpečnostní opatření pro dítě používající horní lůžko.

NEBEZPEČÍ uškrcení: Nikdy nepřipevňujte ani nevešejte předměty na žádnou část palandy, které nejsou určeny pro použití s ​​postelí; napřampmimo jiné háky, pásy a švihadla.

DO NOT REMOVE THIS LABEL. KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.

Seznam komponent

Před zahájením montáže se ujistěte, že jsou všechny díly přítomny a nepoškozené. Identifikaci naleznete na níže uvedeném obrázku.

Figure 2: Assembled bunk bed for component reference. Individual parts are detailed in assembly steps.

• Upper Panels (2)
• Lower Panels (2)
• Lower Bed Frame (1)
• Upper Bed Frame (1)
• Guardrails (2)
• Ladder (1)
• Connection Posts (4)
• Čepice (8)

Hardware (screws, washers, nuts, Allen wrench) will be included in a separate package. Please verify all hardware is present before starting assembly.

Pokyny pro nastavení

Assembly requires at least two adults. Do not overtighten screws during initial assembly; tighten all fasteners securely once the bed is fully assembled.

Step 1: Assemble the Lower Bed Frame

Attach the Lower Panels (B) to the Lower Bed Frame (C) using the provided bolts, washers, and nuts (L+K+J). Ensure all connections are secure but do not fully tighten yet. Use the Allen wrench (M).

Figure 3: Step 1 - Assembling the lower bed frame.

Step 2: Attach Connection Posts

Insert the four Connection Posts (G) into the top of the posts of the assembled Lower Bed Frame (B).

Figure 4: Step 2 - Attaching connection posts.

Step 3: Attach Upper Panels

Place the Upper Panels (A) onto the Connection Posts (G) on the Lower Bed Frame. Ensure they are seated correctly.

Figure 5: Step 3 - Attaching upper panels.

Step 4: Assemble the Upper Bed Frame

Attach the Upper Bed Frame (D) to the Upper Panels (A) using the remaining bolts, washers, and nuts (L+K+J). Fully tighten all fasteners from Step 1 and Step 4 now. Use the Allen wrench (M).

Figure 6: Step 4 - Assembling the upper bed frame.

Step 5: Install Guardrails and Ladder

Attach the Guardrails (E) to the Upper Panels (A) using the designated screws (I) and the Allen wrench (M). Ensure they are securely fastened on both long sides of the upper bunk. Hook the Ladder (F) onto the side of the Upper Bed Frame (D). Ensure the hooks are fully engaged and the ladder is stable. Some models may include additional fasteners (H) to secure the ladder to the upper bed frame (D) using screws (M). Refer to the detailed diagram for proper placement and tightening with the Allen wrench (O).

Figure 7: Steps 5-7 - Installing guardrails and attaching/securing the ladder.

Krok 6: Nainstalujte čepice

Place the plastic Caps (N) onto any exposed posts for a finished look and added safety.

Figure 8: Step 8 - Installing caps.

Conversion to Two Free-Standing Beds

Your bunk bed can be converted into two separate twin beds. Follow these instructions carefully:

1. Remove the Ladder (F) and Guardrails (E).
2. Carefully lift the Upper Bed Frame (D) off the Connection Posts (G).
3. Remove the Connection Posts (G) from the Lower Bed Frame (B).
4. Attach the Upper Panels (A) to the Upper Bed Frame (D) using the appropriate hardware (L+K+J) to form the second twin bed.
5. Install Caps (N) on any exposed posts of both new twin beds.

Figure 9: Diagram illustrating the conversion of the bunk bed into two separate twin beds.

Figure 10: The Powell Heavy Metal Twin-Over-Twin Bunk Bed configured as two individual twin beds.

Údržba

• Regularly inspect all bolts and connections to ensure they remain tight. Retighten as necessary to maintain structural integrity.
• Kovové povrchy čistěte měkkým,amp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the pewter powder-coated finish.
• Check the ladder for any signs of wear or damage. Replace any worn or broken parts immediately.
• Ensure mattresses meet the recommended dimensions and thickness to maintain safety standards.

Odstraňování problémů

Specifikace

• Číslo modelu: 941-138
• Velikost: Twin-Over-Twin
• Rozměry produktu: 79.33 cm D x 43 cm Š x 65 cm V
• Barva: Cín
• Materiál: Heavy Gauge Tubular Steel
• Typ dokončení: Práškové lakování
• Maximum Weight Recommendation (Upper Bunk): 300 liber
• Kompatibilní velikost matrace: Twin (74"-75"L x 37-1/2"-38-1/2"W)
• Maximum Mattress Thickness (Upper Bunk): 8"
• Požadovaná montáž: Ano
• Hmotnost položky: 109.8 libry

Obrázek 11: Rozměry produktu.

Záruka a podpora

Informace o záruce: This product is covered by a limited manufacturer's warranty against defects in materials and workmanship. For specific warranty details and duration, please refer to the product's original purchase documentation or contact Powell customer service. Keep your proof of purchase for warranty claims.

Zákaznická podpora: If you have any questions regarding assembly, missing parts, or product operation, please contact Powell customer service. Contact information can typically be found on the product packaging or the retailer's webmísto, kde byl produkt zakoupen.

Náhradní díly: For replacement parts, including additional guardrails, please contact our customer service department. Do not use substitute parts not approved by the manufacturer.