Bezdrátová myš HP X4000 s laserovým senzorem – návod k obsluze

1. Konec produktuview

The HP Wireless Mouse X4000 with Laser Sensor is designed for comfort and efficiency. It features advanced wireless connectivity, extended battery life, and a high-precision laser sensor for smooth navigation across various surfaces. This manual will guide you through the setup and usage of your new mouse.

Obrázek 1: HP Wireless Mouse X4000 and its USB receiver. The mouse features a sleek black design with a scroll wheel and two main buttons. The small USB receiver is shown next to it, ready for connection.

Klíčové vlastnosti:

• Bezdrátové připojení: 2.4GHz wireless technology provides a 30ft (10m) roaming range.
• Prodloužená životnost baterie: Up to 30 months of battery life on two AA batteries.
• High-Precision Laser Sensor: 1600 dpi laser sensor for accurate tracking on almost any surface.
• Technologie HP Link-5: Connect up to five compatible HP accessories with a single nano receiver.
• Ergonomický design: Sculpted shape with smooth edges and sweeping contours for comfortable use.
• LED indikátor: Light to verify connection and alert when battery runs low.

2. Průvodce nastavením

2.1. Instalace baterií

1. Najděte přihrádku na baterie na spodní straně myši.
2. Gently push the battery compartment cover inwards and slide it off to reveal the battery slot.
3. Vložte dvě baterie typu AA a dbejte na správnou polaritu (+ a –) tak, aby se póly (+ a –) shodovaly s indikátory uvnitř přihrádky.
4. Replace the battery compartment cover by aligning it and sliding it back until it clicks into place.

2.2. Připojení USB přijímače

1. Locate the USB nano receiver, typically stored inside the mouse's battery compartment or packaged separately.
2. Zapojte USB přijímač do volného USB portu na vašem počítači (notebooku nebo stolním počítači).
3. Váš počítač by měl automaticky detekovat a nainstalovat potřebné ovladače. Může to chvíli trvat.

2.3. Zapnutí myši

1. On the underside of the mouse, locate the On/Off switch.
2. Slide the switch to the "On" position. An LED indicator light on the mouse may illuminate briefly to confirm it is powered on.

2.4. Párování (pokud je to nutné)

In most cases, the mouse will automatically pair with the USB receiver. If it does not, or if you are using HP Link-5 technology to connect multiple devices:

1. Ensure the mouse is powered on and the USB receiver is plugged into your computer.
2. On the underside of the mouse, press the "Connect" button (often a small blue button).
3. Follow any on-screen prompts on your computer to complete the pairing process. For Windows, you might need to go to "Bluetooth & devices" settings and select "Add device" if the mouse isn't automatically recognized.

3. Návod k obsluze

3.1. Základní funkce myši

• Kliknutí levým tlačítkem myši: Stisknutím levého tlačítka vyberete položky, otevřete filenebo aktivovat funkce.
• Kliknutí pravým tlačítkem myši: Press the right button to open context menus with additional options.
• Rolovací kolečko: Otáčením kolečka nahoru nebo dolů můžete procházet dokumenty nebo web pages. The scroll wheel can also be pressed as a middle-click button for certain functions.
• Hnutí: Move the mouse across a flat surface to control the cursor on your screen. The laser sensor provides precise tracking.

3.2. HP Link-5 Technology

The HP Wireless Mouse X4000 utilizes HP Link-5 technology, allowing you to connect up to five compatible HP wireless devices (such as keyboards or other mice) to a single nano USB receiver. This helps conserve USB ports on your computer.

• To add another Link-5 compatible device, ensure the device is in pairing mode and follow its specific instructions for connecting to an existing Link-5 receiver.

4. Údržba

4.1. Výměna baterie

The HP Wireless Mouse X4000 boasts an impressive battery life of up to 30 months. When the LED indicator light on the mouse begins to flash or the mouse performance degrades, it's time to replace the batteries.

1. Turn off the mouse using the On/Off switch on the underside.
2. Odstraňte kryt bateriového prostoru.
3. Remove the old AA batteries and dispose of them responsibly according to local regulations.
4. Insert two new AA batteries, observing the correct polarity.
5. Replace the battery compartment cover and turn the mouse back on.

4.2. Čištění

To maintain optimal performance and appearance, regularly clean your mouse.

• Použijte měkký hadřík, který nepouští vlákna dampvodou nebo jemným čisticím roztokem.
• Wipe the exterior of the mouse, paying attention to the glossy surfaces which may show smudges.
• Zabraňte vniknutí vlhkosti do otvorů nebo štěrbin.
• Nepoužívejte drsné chemikálie ani abrazivní čisticí prostředky.

5. Řešení problémů

5.1. Myš nereaguje

• Zkontrolujte napájení: Ensure the mouse is turned "On" and the batteries are correctly installed and charged. Replace batteries if necessary.
• Zkontrolujte USB přijímač: Ujistěte se, že je USB přijímač bezpečně zapojený do funkčního USB portu v počítači. Zkuste jiný USB port.
• Re-pair Mouse: If the connection is lost, try re-pairing the mouse with the receiver as described in Section 2.4.
• Rušení: Move the mouse closer to the USB receiver. Avoid using the mouse near other wireless devices that might cause interference.

5.2. Nepravidelný pohyb kurzoru

• Povrch: Ensure you are using the mouse on a clean, non-reflective, and uniform surface. Highly reflective or uneven surfaces can affect laser tracking.
• Čistit senzor: Gently clean the laser sensor on the underside of the mouse with a soft, dry cloth.

6. Specifikace

7. Záruka a podpora

Informace o záruce a technickou podporu naleznete v dokumentaci dodané s produktem nebo navštivte oficiální stránky podpory HP. webwebu. Konkrétní záruční podmínky se mohou lišit v závislosti na regionu a datu nákupu.

Online podpora: www.hp.com/support