Sony STRDH130 2 Channel Stereo Receiver

Návod k obsluze

Zapnutí/vypnutí

Stiskněte tlačítko V/V (napájení) button on the front panel or the remote control to turn the receiver on or off. The receiver features an Auto Standby function that automatically switches it to standby mode if it is not in use or no audio signal is sent to it for 30 minutes.

Figure 2: Front panel controls, including the power button, input selector, and volume knob.

Výběr vstupního zdroje

Otočte VÝBĚR VSTUPU knob on the front panel or use the corresponding input buttons on the remote control (e.g., VIDEO, BD/DVD, SA-CD/CD, TUNER, PORTABLE, MD/TAPE) to select your desired audio source.

Nastavení hlasitosti

Otočte HLAVNÍ HLASITOST knob on the front panel clockwise to increase volume and counter-clockwise to decrease it. You can also use the VOL +/– tlačítka na dálkovém ovladači.

Provoz tuneru (FM/AM)

Stiskněte tlačítko TUNER button on the remote or rotate the INPUT SELECTOR to select FM or AM. Use the TUNING +/- buttons to manually tune to a station. You can store your favorite stations using the MEMORY/ENTER button and number buttons (0-9) on the remote. The receiver supports 30 presets for both FM and AM stations.

Nastavení basů a výšek

Použijte BASS +/- a VÝŠKY +/- buttons on the front panel or remote control to adjust the low and high frequency response of the audio output.

Pomocí dálkového ovládání

The supplied remote control provides full functionality for the receiver, including power, input selection, volume, tuning, and menu navigation. Ensure the batteries are correctly inserted.

Figure 3: The Sony STRDH130 receiver shown with its full-function remote control.

Údržba

To ensure long-term performance and appearance of your Sony STRDH130 receiver, follow these maintenance guidelines:

• Čištění: Vnější povrchy otřete měkkým, suchým hadříkem. Nepoužívejte abrazivní houbičky, drátěnky ani rozpouštědla, jako je líh nebo benzen.
• Větrání: Ensure proper ventilation by keeping the top and sides of the receiver clear of obstructions. Do not block the ventilation holes.
• Prach: Regularly dust the unit to prevent accumulation, which can affect performance and lead to overheating.
• Napájecí kabel: Periodically check the power cord for any damage. If damaged, contact qualified service personnel.

Odstraňování problémů

If you experience issues with your receiver, try the following basic troubleshooting steps:

• Bez napájení: Ensure the power cord is securely plugged into a working electrical outlet. Check if the power button is pressed.
• Žádný zvuk: Verify that the correct input source is selected. Check all audio cable connections between the receiver and your audio components, and between the receiver and your speakers. Ensure speaker wires are correctly connected to the appropriate terminals and that speaker A/B selection is correct. Adjust the volume level.
• Špatný příjem rádia: Adjust the position of the FM wire antenna and AM loop antenna. Ensure they are fully extended and away from other electronic devices that might cause interference.
• Dálkové ovládání nefunguje: Check the batteries in the remote control and replace them if necessary. Ensure there are no obstructions between the remote and the receiver's remote sensor.
• Unit Shuts Off Automatically: This may be due to the Auto Standby function. If it happens unexpectedly, ensure proper ventilation to prevent overheating.

If the problem persists after trying these steps, please refer to the full user manual or contact Sony customer support.

Specifikace

Záruka a podpora

Podrobné informace o záruce a zákaznické podpoře naleznete na oficiálních stránkách společnosti Sony. website or the complete user manual provided with your product. You can also find the full user manual in PDF format zde.

For service or technical assistance, please contact Sony customer support directly.