Lindy 4x2 HDMI 1.4 Switching Splitter (Model 38054) User Manual

Zavedení

Welcome to the user manual for the Lindy 4x2 HDMI 1.4 Switching Splitter, Model 38054. This device allows you to connect up to four HDMI or DVI source devices to two HDMI display devices, distributing signals simultaneously or switching between sources. Please read this manual thoroughly to ensure proper installation and operation.

Bezpečnostní informace

Please observe the following safety guidelines to prevent damage to the unit and ensure user safety:

• Do not expose this unit to rain, moisture, or liquids.
• Do not attempt to open the unit casing. Uvnitř nejsou žádné součásti, které by mohl uživatel opravit.
• Use only the provided power adapter. Using an unauthorized adapter may damage the unit and void the warranty.
• Zajistěte dostatečné větrání kolem jednotky. Neblokujte žádné větrací otvory.
• Disconnect power before cleaning. Clean the unit with a soft, dry cloth only.

Obsah balení

Ověřte, zda váš balíček obsahuje následující položky:

• Lindy 4x2 HDMI 1.4 Switching Splitter (Model 38054)
• Napájecí adaptér
• Infračervené dálkové ovládání
• Uživatelská příručka (tento dokument)

Vlastnosti produktu

• Connects up to 4 HDMI/DVI source devices to 2 HDTV displays or projectors.
• Supports 1080p resolution and 3D video formats.
• Compatible with digital video formats in deep color mode (up to 36 bit).
• Supports lossless compressed digital audio formats, including Dolby TrueHD and DTS-HD Master Audio.
• Each selected input signal is simultaneously sent to both connected display devices.
• Includes an infrared remote control for convenient switching.
• Features signal re-timing, compensation, and regeneration for output signal transmission up to 10 meters.

Konec produktuview

The Lindy 4x2 HDMI 1.4 Switching Splitter is designed for efficient signal management in home theater or professional AV setups.

Tento obrázek ukazuje přední a horní část view of the Lindy 4x2 HDMI 1.4 Switching Splitter. The front panel typically features LED indicators for active inputs and outputs, along with buttons for manual switching. The rear panel, not fully visible, would contain the HDMI input and output ports, and the power input.

Přední panel

The front panel typically includes:

• Tlačítka pro výběr vstupu: For manually selecting the desired HDMI input source (e.g., Input 1, Input 2, etc.).
• LED indikátory: To show which input is currently active and which outputs are connected.
• IR přijímač: Pro příjem signálů z infračerveného dálkového ovladače.

Zadní panel

Zadní panel obvykle obsahuje:

• HDMI Input Ports (x4): Connect your source devices (e.g., Blu-ray player, game console, PC).
• HDMI Output Ports (x2): Connect to your display devices (e.g., HDTV, projector).
• Vstup DC 5V: Pro připojení dodaného napájecího adaptéru.

Nastavení a instalace

Follow these steps to set up your Lindy 4x2 HDMI 1.4 Switching Splitter:

1. Ensure all devices (source, display, and splitter) are powered off and unplugged from their power outlets.
2. Connect your HDMI source devices (e.g., DVD player, game console, PC) to the HDMI Input ports (HDMI IN 1-4) on the rear of the splitter using high-quality HDMI cables.
3. Connect your HDMI display devices (e.g., HDTV, projector) to the HDMI Output ports (HDMI OUT 1-2) on the rear of the splitter using high-quality HDMI cables.
4. Connect the provided power adapter to the DC 5V Power Input on the splitter, then plug the adapter into a suitable power outlet.
5. Power on your display devices, then your source devices, and finally the Lindy 4x2 HDMI 1.4 Switching Splitter.
6. Select the desired input source using the buttons on the front panel or the infrared remote control.

Návod k obsluze

Ruční přepínání

To switch between input sources manually, press the corresponding input selection button on the front panel of the splitter. The LED indicator for the active input will illuminate.

Provoz dálkového ovládání

Use the provided infrared remote control to select input sources. Point the remote control towards the IR receiver on the front panel of the splitter.

• Input 1-4 Buttons: Press the button corresponding to the desired HDMI input source (1, 2, 3, or 4).
• Vypínač: (If available on your remote) To power the unit on or off.

The selected input will be displayed on both connected output devices simultaneously.

Údržba

To ensure optimal performance and longevity of your Lindy 4x2 HDMI 1.4 Switching Splitter:

• Keep the unit in a cool, dry place, away from direct sunlight and heat sources.
• Clean the unit with a soft, dry cloth. Do not use liquid or aerosol cleaners, as they may damage the finish or internal components.
• Ensure proper ventilation and do not block any vents on the unit.

Odstraňování problémů

If you encounter issues with your Lindy 4x2 HDMI 1.4 Switching Splitter, refer to the following common solutions:

Specifikace

Záruka a podpora

This Lindy product comes with a 2-letá záruka od data nákupu.

For technical support, troubleshooting assistance, or warranty claims, please contact your local Lindy customer service or visit the official Lindy website for further assistance. Please retain your proof of purchase for warranty validation.