Woods 59745WD 24-Hour Mechanical In-Wall Timer Instruction Manual

Zavedení

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Woods 59745WD 24-Hour Mechanical In-Wall Timer. Please read all instructions carefully before installation and use. Retain this manual for future reference.

Image 1: Woods 59745WD 24-Hour Mechanical In-Wall Timer. This image shows the front view of the white mechanical timer with its circular dial and two-prong outlet.

Bezpečnostní informace

VAROVÁNÍ: Nebezpečí úrazu elektrickým proudem. Installation requires working with electrical wiring. If you are not familiar with electrical wiring, consult a qualified electrician. Improper installation can result in serious injury or death.

• Disconnect power at the circuit breaker or fuse box before installing or servicing the timer.
• Ujistěte se, že všechna elektroinstalace jsou bezpečná a splňují místní elektrotechnické předpisy.
• This timer is designed for indoor use only.
• Nepřekračujte maximální elektrické jmenovité hodnoty zařízení.

Obsah balení

Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:

• Woods 59745WD 24-Hour Mechanical In-Wall Timer
• Návod k použití
• Montážní šrouby (pokud jsou k dispozici)

Image 2: Packaging for the Woods 59745WD In-Wall Timer. The image displays the product in its retail packaging, highlighting the brand and model number.

Nastavení a instalace

This timer is designed to replace a standard wall light switch. Professional installation is recommended.

1. Vypnout napájení: Locate the circuit breaker or fuse that controls the light switch you intend to replace. Turn off the power completely to avoid electrical shock. Verify power is off using a voltage tester.
2. Demontáž starého spínače: Carefully remove the wall plate and unscrew the existing light switch from the electrical box. Disconnect the wires from the old switch. Note the connections: typically, a neutral (white), an incoming hot (black), and an outgoing load (black or red).
3. Wire the Timer: Connect the Woods 59745WD timer according to the following common wiring scheme. Note: Wiring colors may vary. If unsure, consult a qualified electrician.
   • Připojte bílý vodič od časovače k neutrální (bílá) wires in the electrical box.
   • Připojte černý vodič od časovače k incoming hot (black) wire from the power source.
   • Připojte červený vodič od časovače k outgoing load (black or red) wire that goes to the light fixture.
   • If a ground wire is present in the electrical box, connect it to the timer's ground terminal (if available). The product specifications indicate no explicit ground wire mentioned in some reviews, but proper grounding is always recommended.
4. Namontujte časovač: Carefully push the wired timer into the electrical box. Secure it with the provided screws.
5. Instalace čelního panelu: Attach the decorative wall plate over the timer. The instructions suggest disassembling the timer (removing the time knob and face plate held by 2 screws), installing the light according to the wiring diagram, securing the timer in the box, placing the decorative light plate over it and screwing the plate to the timer. The opening aligns to the timer as you screw the plate and the timer together. Install the timer faceplate and secure with the two screws. Replace the knobs.
6. Obnovit napájení: Znovu zapněte napájení jističem nebo pojistkovou skříňkou.

Návod k obsluze

The Woods 59745WD timer features a 24-hour mechanical dial with 30-minute interval settings.

1. Nastavit aktuální čas: Rotate the inner dial clockwise until the current time aligns with the "TIME NOW" arrow indicator. The dial is marked with 24 hours (1-12 AM/PM).
2. Časy zapnutí/vypnutí programu: The outer ring of the dial has small pins. Each pin represents a 30-minute interval.
   • Chcete-li nastavit ON period, pull the pins vnější for the desired duration.
   • Chcete-li nastavit VYPNUTO period, push the pins vnitřní for the desired duration.

   Napřample, to turn a light on from 7 PM to 11 PM, pull out all pins corresponding to the 7:00 PM, 7:30 PM, 8:00 PM, 8:30 PM, 9:00 PM, 9:30 PM, 10:00 PM, and 10:30 PM segments.

3. Vyberte provozní režim: Use the side switch to select the desired mode:
   • NA: Připojené zařízení zůstane nepřetržitě zapnuté, čímž se obejde nastavení časovače.
   • ČASOVAČ: The connected device will operate according to the programmed ON/OFF times.
   • OFF: Připojené zařízení zůstane trvale vypnuté, čímž se obejde nastavení časovače.

Image 3: Woods In-Wall Timer in a home setting. This image illustrates the timer installed in a wall, controlling a light fixture, demonstrating its practical application.

Údržba

The Woods 59745WD timer requires minimal maintenance.

• Čištění: Disconnect power before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Inspekce: Periodically inspect the timer for any signs of damage, loose connections, or wear. If any issues are found, discontinue use and consult a qualified electrician.

Odstraňování problémů

Specifikace

Informace o záruce

According to available product information, there is no specific warranty description provided for this product.

Podpora

For further assistance or technical support, please contact the manufacturer, Woods, or refer to their official website. When contacting support, please have your product model number (59745WD) and UPC (078693597459) available.

You can visit the Woods store on Amazon for more information: Woods Store