Zavedení
The Chief TS325TU Medium THINSTALL Dual Swing Arm Wall Display Mount is designed to provide a secure and versatile mounting solution for flat panel displays ranging from 30 to 52 inches. This mount offers an ultra-low profile when collapsed and extends up to 25 inches, allowing for optimal viewing angles with its Centris low-profile tilt and Centerless lateral shift capabilities. It features integrated cable management for a clean installation.
Bezpečnostní informace
VAROVÁNÍ: Failure to read, understand, and follow all instructions can result in serious personal injury, property damage, or voiding of product warranty. If you have any questions, contact Chief customer service or a qualified installer.
- Nepřekračujte maximální nosnost 75.00 lb (34 kg).
- Ujistěte se, že montážní povrch bezpečně unese celkovou hmotnost držáku a displeje.
- Always mount to structural studs or appropriate wall anchors. Note that this mount is designed for studs approximately 16 inches apart.
- Use appropriate tools and follow all local building codes.
- Během instalace držte děti a domácí zvířata mimo dosah.
Obsah balení
Před zahájením instalace ověřte, zda jsou všechny komponenty přítomny:
- 1 x Hlavní sestava
- 1 x Wall Rail
- 1 x Right Upright
- 1 x Left Upright
- 1 x Top Interface Support
- 1 x Bottom Interface Support
- 2 x Wall Rail Cover
- 1 x Lag Screw Cover
- 1 x Bumper
- 1 x Latch Spacer
- 2 x Long Adhesive
- 4 x Short Adhesive
- Mounting Hardware (various screws, washers, spacers)
Nastavení a instalace
Proper installation is critical for the safety and performance of your display mount. It is recommended to have at least two people for installation due to the weight and size of the mount.
Požadované nástroje (nejsou součástí dodávky):
- Vyhledávač cvočků
- Vrtejte vhodnými vrtáky
- Úroveň
- Svinovací metr
- Socket Wrench / Ratchet
- Šroubovák s křížovou hlavou
- Tužka
Instalace krok za krokem:
- Připravte zeď:
Locate and mark the center of two adjacent wall studs. This mount is designed for standard 16-inch stud spacing. Ensure there are no electrical wires or plumbing in the drilling path. It is highly recommended to plan your entire layout, including TV, speakers, and wiring, before drilling.
- Attach Wall Rail:
Position the Wall Rail on the marked studs, ensuring it is level. Mark the pilot hole locations. Drill pilot holes into the studs. Secure the Wall Rail to the wall using the provided lag screws. Ensure the screws are tightened securely but do not overtighten to avoid stripping.
Image: Main assembly of the Chief TS325TU mount, showing the wall plate, articulating arms, and display interface.
- Assemble Display Interface:
Attach the Right and Left Uprights to the back of your display using the appropriate screws, washers, and spacers from the mounting hardware kit. Ensure the uprights are centered and level on the display. Then, attach the Top and Bottom Interface Supports to the uprights.
- Mount Display to Wall Rail:
Carefully lift the display with the attached interface and hook it onto the Wall Rail. The design allows for post-installation lateral shift of up to 16 inches (406 mm) for limitless centering capability. Secure the display to the mount according to the specific instructions in the detailed manual (refer to manufacturer's full manual for precise steps).
Obrázek: Boční view of the Chief TS325TU mount, illustrating its compact profile when retracted and the extension capability.
- Správa kabelů:
Utilize the enclosed, tool-free cable covers and the wide open wall plate to route power and signal cables. This helps maintain a clean and organized appearance.
Ovládání držáku
The Chief TS325TU mount offers flexible positioning for your display:
- Rozšíření: The mount extends up to 25 inches (635 mm) from the wall, maximizing viewing potential from various positions in the room.
- Náklon: The Centris low-profile tilt mechanism allows for up to 15 degrees of effortless fingertip tilt. This enables you to achieve optimal viewúhly a snižují oslnění.
- Swivel/Pan: The dual swing arms allow for significant swivel capabilities, enabling you to turn the display left or right to suit your viewpotřeby.
- Boční posun: After installation, the display can be shifted laterally along the wall plate by up to 16 inches (406 mm) to fine-tune its horizontal position without re-drilling.
Obrázek: Úhlový view of the Chief TS325TU mount, highlighting its robust construction and articulating design.
Údržba
Regular maintenance ensures the longevity and safe operation of your mount:
- Čištění: Pravidelně otírejte prach z montáže měkkým, suchým hadříkem. Na odolné skvrny použijte lehceamp hadříkem s jemným mýdlem a poté otřete dosucha. Nepoužívejte abrazivní čisticí prostředky ani rozpouštědla.
- Zkontrolujte připojení: Pravidelně kontrolujte všechny šrouby a vruty, zda jsou pevně utažené. Nepřetahujte je.
- Kontrola pohybu: Occasionally extend, retract, tilt, and swivel the mount to ensure smooth operation. If movement becomes stiff, consult the troubleshooting section or contact support.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Držák se zdá být nestabilní nebo vratký. | Loose wall mounting bolts or display attachment screws. | Carefully re-tighten all wall and display attachment screws. Do not overtighten. If the issue persists, consult a professional installer. |
| Difficulty extending or retracting the arm. | Friction in the arm joints. | Ensure the mount is not overloaded. Check for any obstructions. The mount is designed for smooth movement; excessive force should not be required. |
| Display does not tilt smoothly. | Tilt mechanism tension. | The Centris tilt mechanism is designed for fingertip adjustment. Refer to the full manufacturer's manual for specific tilt tension adjustment procedures if needed. |
| Kabely nejsou úhledně spravované. | Improper routing through cable covers. | Re-route cables through the integrated cable covers on the arms and wall plate for a cleaner look. |
For complex issues or if you are unsure about any step, please contact Chief customer support or a certified installer.
Specifikace
| Funkce | Detail |
|---|---|
| Model produktu | TS325TU |
| Značka | Hlavní |
| Typ montáže | Držák na zeď |
| Typ pohybu | Tilt, Articulating |
| Maximální nosnost | 75.00 lb (34 kg) |
| Minimum Compatible Display Size | 30 palce |
| Maximální kompatibilní velikost displeje | 52 palce |
| Maximální prodloužení | 25 palce (635 mm) |
| Maximální úhel náklonu | 15 stupňů |
| Lateral Shift Adjustment | Up to 16 Inches (406 mm) |
| Rozměry produktu (sbalené) | 1.3 x 29.5 x 17.2 palce (33 x 749 x 437 mm) |
| Hmotnost položky | 1 libry (0.45 kg) Note: This weight seems unusually low for a mount of this type and capacity. Please refer to official manufacturer documentation for precise weight. |
| Materiál | Kov |
| Barva | Černý |
Záruka a podpora
For detailed warranty information, please refer to the official Chief Manufacturing website or the documentation included with your product. Chief provides support for their products to ensure customer satisfaction.
If you require technical assistance, have questions about installation, or need to report a missing part, please visit the official Chief Manufacturing support page or contact their customer service directly. Contact information can typically be found on their webmísto:
