Chemtronics ES1210 Electro-Wash PX Precision Cleaner Degreaser Instruction Manual

1. Konec produktuview

The Chemtronics ES1210 Electro-Wash PX is a fast-drying, one-step precision cleaning and degreasing agent. It is formulated to be safe for most plastics. Engineered with very low surface tension, this high-pressure aerosol formulation effectively flushes areas clean and evaporates instantly, leaving no residue. It is an extra-strength, general-purpose cleaner/degreaser.

Obrázek 1: Přední strana view of the Chemtronics ES1210 Electro-Wash PX aerosol can, showing the product name, brand, and key features like "Plastic Safe" and "Xtra Strength".

2. Bezpečnostní informace a opatření

DANGER! EXTREMELY FLAMMABLE.

Direct inhalation of spray may be harmful. Container may explode if heated. Read precautions on back panel before use.

• Hořlavý: Uchovávejte mimo dosah tepla, horkých povrchů, jisker, otevřeného ohně a jiných zdrojů zapálení. KOUŘENÍ ZAKÁZÁNO.
• Pressurized Container: Do not pierce or burn, even after use. Do not spray on an open flame or other ignition source.
• Oční kontakt: Causes serious eye irritation. Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If eye irritation persists, get medical attention.
• Kontakt s kůží: Wash hands thoroughly after handling. If skin irritation occurs, get medical advice/attention.
• Inhalace: Direct inhalation of spray may be harmful. Use only in a well-ventilated area. If inhaled, move person to fresh air and restore breathing. If breathing is difficult, give oxygen. Get medical attention immediately.
• Skladování: Protect from sunlight. Do not expose to temperatures exceeding 50°C/122°F. Store in a well-ventilated place. Keep container tightly closed.
• Likvidace: Zlikvidujte obsah/obal v souladu s místními/regionálními/národními/mezinárodními předpisy.
• Uchovávejte mimo dosah dětí.

For industrial use only. Read Safety Data Sheets (SDS) prior to use. For SDS or technical data sheets, contact Chemtronics Technical Hot Line at 1-800-TECH-401 (1-800-832-4401) or visit their webmísto na www.chemtronics.com.

Obrázek 2: Zadní strana view of the Chemtronics ES1210 aerosol can, displaying detailed usage directions and critical safety warnings in multiple languages.

Obrázek 3: Boční strana view of the Chemtronics ES1210 aerosol can, providing further safety information, ingredient list, manufacturer contact details, and a barcode.

3. Nastavení a příprava

1. Zajistěte dobré větrání pracovního prostoru.
2. Wear appropriate personal protective equipment (PPE), including safety glasses and gloves, to prevent eye and skin contact.
3. Identify the object to be cleaned. Ensure it is powered off and cooled down if applicable.
4. Shake the can gently before use.
5. Attach the extension tube to the nozzle for precision application, if required.

4. Návod k obsluze

Follow these steps for effective cleaning and degreasing:

1. Hold the object to be cleaned in a vertical position.
2. Hold the aerosol can 4-6 inches (10-15 cm) from the surface of the object.
3. Spray from top to bottom, allowing the liquid to flush away contaminants.
4. For precision application or reaching confined areas, utilize the provided extension tube.
5. Allow the product to evaporate completely. It is designed to evaporate instantly, leaving no residue.

Note: This product is safe on most plastics. Always test on an inconspicuous area first if unsure about material compatibility.

5. Skladování a údržba

Proper storage ensures product longevity and safety:

• Skladujte na chladném, suchém a dobře větraném místě.
• Keep away from direct sunlight and temperatures exceeding 50°C (122°F).
• Keep container tightly closed when not in use.
• Do not store near heat sources, sparks, or open flames.

No specific maintenance is required for the aerosol can itself.

6. Troubleshooting and First Aid

In case of accidental exposure or misuse, refer to the following:

• Oční kontakt: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Check for and remove any contact lenses. Get medical attention immediately.
• Kontakt s kůží: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes. Continue to rinse for at least 10 minutes. Get medical attention if irritation develops.
• Inhalace: If inhaled, remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.
• Požití: Do not induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately.
• Oheň: In case of fire, use dry chemical, CO2, water spray (fog), or foam. Do not use water jet.

For further assistance, consult the Safety Data Sheet (SDS) or contact emergency services.

7. Specifikace

Image 4: A visual representation of the Chemtronics ES1210 aerosol can's size, indicating a height of approximately 10 inches (25 cm) when held by a hand.

8. Informace o záruce

For specific warranty details regarding the Chemtronics ES1210 Electro-Wash PX, please refer to the official Chemtronics webwebu nebo se obraťte přímo na jejich zákaznickou podporu. Záruční podmínky se mohou lišit.

9. Podpora a kontaktní informace

For technical assistance, product inquiries, or safety data sheets, please contact Chemtronics:

• Technical Hot Line: 1-800-TECH-401 (1-800-832-4401)
• Webmísto: www.chemtronics.com
• Adresa: Chemtronics, 8125 Cobb Center Dr., Kennesaw, Georgia USA 30152-4388

For 24-hour emergency support, call CHEMTREC at 1-800-424-9300 (or +1 703-527-3887 for collect calls).