NGK 5506 HT Lead Set Instruction Manual

1. Konec produktuview

The NGK 5506 HT Lead Set is designed to provide reliable ignition performance for compatible vehicle models. This set includes four resistive ignition cables, ensuring efficient power transfer to the spark plugs. Proper installation and maintenance are crucial for optimal engine operation and longevity of the components.

Obrázek 1: NGK 5506 HT Lead Set. This image displays the complete set of four high tension ignition cables, coiled together, highlighting their black color and robust construction.

2. Kompatibilita

This NGK 5506 HT Lead Set is compatible with specific vehicle models. Verify your vehicle's compatibility before installation. Refer to your vehicle's service manual or consult a qualified mechanic if unsure.

Známé kompatibilní modely:

• Hyundai Getz Hatchback 1.3 (2002 - 2010) 63kW
• Hyundai Accent II 1.3 (1999 - 2005) 63kW
• Hyundai Getz Hatchback 1.3 i (2002 - 2010) 60kW
• Hyundai Accent II 1.3 (1999 - 2005) 55kW
• Hyundai Accent II 1.3 (1999 - 2005) 62kW
• Hyundai Accent II 1.3 (1999 - 2005) 61kW
• Hyundai Accent Saloon 1.3 (1999 - 2006) 55kW
• Hyundai Accent Saloon 1.3 (1999 - 2006) 63kW

Ekvivalentní čísla dílů:

• HYUNDAI: 27501-22B10, 27501-02D00, 27501-22B00
• KIA: 27501-22B10
• BERU: 0300891519, ZEF1519
• BOSCH: B898, 0986356898
• EUROCABLE: EC 7759
• FAE: 85998
• NIPPARTS: J5380512
• BRECAV: 29.505
• BREMI: 600/481
• FACET: 4.7119

3. Bezpečnostní opatření

Always prioritize safety when working on vehicle ignition systems. High voltage is present. Failure to follow safety guidelines can result in serious injury or damage to the vehicle.

• Ensure the vehicle's engine is completely off and cooled down before beginning any work.
• Disconnect the negative terminal of the vehicle's battery to prevent accidental engine cranking or electrical shock.
• Používejte vhodné osobní ochranné prostředky, včetně ochranných brýlí a izolačních rukavic.
• Avoid touching metal components of the ignition system while the engine is running or the battery is connected.
• Pokud si nejste jisti některým krokem, poraďte se s profesionálním mechanikem.

4. Instalace (Nastavení)

This section outlines the general procedure for installing the NGK 5506 HT Lead Set. Specific steps may vary slightly depending on the vehicle model. Always refer to your vehicle's service manual for detailed instructions.

1. Příprava: Zaparkujte vozidlo na rovném povrchu, zatáhněte parkovací brzdu a ujistěte se, že je motor vypnutý a vychladlý. Odpojte záporný pól baterie.
2. Identify Existing Leads: Locate the current high tension leads connecting the ignition coil (or distributor) to the spark plugs. Note the routing and length of each lead. It is recommended to replace one lead at a time to avoid mixing up connections.
3. Remove Old Leads: Carefully grasp the spark plug boot and twist slightly while pulling to remove it from the spark plug. Do not pull on the wire itself. Repeat for the ignition coil/distributor end.
4. Compare New Leads: Select a new NGK 5506 lead that matches the length and connector type of the lead you just removed. The set includes leads of varying lengths to fit different cylinder positions.


Obrázek 2: Detailní záběr view of NGK HT Lead connectors. This image shows the spade connector type and the spark plug boot end, illustrating the design of the cable ends.

5. Install New Leads: Apply a small amount of dielectric grease (not included) to the inside of both ends of the new lead. This aids in sealing and prevents corrosion. Firmly push the spark plug boot onto the spark plug until it clicks or seats securely. Then, connect the other end to the corresponding terminal on the ignition coil or distributor. Ensure a snug fit.
6. Repeat for All Leads: Continue this process, replacing one lead at a time, until all old leads have been replaced with the new NGK 5506 HT Lead Set.

Obrázek 3: NGK HT Lead Set showing different lengths. This image displays three individual high tension leads, each with a distinct length, demonstrating the variety provided in the set for different cylinder configurations.
7. Secure Leads: Ensure the new leads are routed correctly and secured away from hot engine components or moving parts to prevent damage.
8. Závěrečná kontrola: Double-check all connections to ensure they are secure. Reconnect the negative battery terminal.

5. Provozní aspekty

Once installed, the NGK 5506 HT Lead Set operates as part of your vehicle's ignition system. No specific user operation is required beyond normal vehicle use. The leads are designed for long-term, maintenance-free operation under normal driving conditions.

• After installation, start the engine and listen for any unusual sounds or misfires.
• Observe the engine's idle and acceleration for smooth operation.
• Pokud se vyskytnou nějaké problémy, podívejte se do části Řešení problémů.

6. Údržba

The NGK 5506 HT Lead Set is designed for durability. Regular inspection is recommended as part of your vehicle's routine maintenance schedule.

• Vizuální kontrola: Periodically check the leads for signs of wear, cracking, fraying, or damage to the insulation. Look for any discoloration or burn marks, which could indicate arcing.
• Integrita připojení: Ensure all connections to the spark plugs and ignition coil/distributor remain tight and free from corrosion.
• Čištění: If necessary, gently wipe the leads with a clean, damp cloth to remove dirt or oil. Avoid using harsh chemicals or solvents.
• Nahrazení: Replace leads if any damage is observed or if engine performance issues (e.g., misfires, rough idle) are suspected to be related to the ignition system.

7. Řešení problémů

If you experience issues after installing the NGK 5506 HT Lead Set, consider the following common problems and solutions:

Pokud kroky pro řešení potíží problém nevyřeší, doporučuje se vyhledat pomoc certifikovaného automobilového technika.

8. Specifikace

Detailed technical specifications for the NGK 5506 HT Lead Set:

• Číslo modelu: 5506
• Značka: NGK
• Výrobce: NGK SPARK PLUG
• Ignition Cable Type: Resistive Ignition Cable
• Počet okruhů: 4
• Barva: Černý
• Materiál: Lead (referring to the cable material, not the element)
• Typ konektoru: Spade konektor
• Rozměry produktu: Approximately 5.08 x 4.1 x 3.34 cm (packaged)
• Hmotnost položky: Přibližně 290 g
• UPC: 087295055069
• Čísla dílů OEM: HYUNDAI: 27501-02D00, 27501-22B00, 27501-22B10; KIA: 27501-22B10

9. Záruka a podpora

For warranty information or technical support regarding your NGK 5506 HT Lead Set, please refer to the official NGK website or contact your authorized NGK dealer. Keep your purchase receipt as proof of purchase.

Výrobce: NGK SPARK PLUG

Pro další pomoc navštivte stránku NGK Global Webmísto.