Bobrick B-398

Uživatelská příručka k lékárničce Bobrick B-398

Model: B-398

Zavedení

Thank you for choosing the Bobrick B-398 Medicine Cabinet. This manual provides essential information for the safe and proper installation, operation, and maintenance of your new cabinet. Please read these instructions thoroughly before installation and retain them for future reference.

Bezpečnostní informace

Obsah balení

Před zahájením instalace se prosím ujistěte, že jsou všechny komponenty přítomny:

Bobrick B-398 Medicine Cabinet with mirror door slightly ajar, revealing interior shelves.

Figure 1: Bobrick B-398 Medicine Cabinet. This image shows the cabinet with its mirrored door slightly open, revealing the interior storage shelves. The cabinet is designed for recessed mounting.

Nastavení a instalace

Požadované nástroje:

Recessed Mount Installation (Wall Mount)

  1. Připravte otevření: For recessed mounting, a rough opening in the wall is required. The dimensions for the rough opening should be slightly larger than the cabinet's recessed body dimensions. Refer to the specifications section for exact dimensions. Ensure there are no electrical wires or plumbing in the wall cavity where the cabinet will be installed.
  2. Umístění: Determine the desired height and location for the cabinet. Use a level to mark the precise outline of the rough opening on the wall.
  3. Vystřihněte otvor: Carefully cut the marked opening in the drywall or plaster. If cutting into studs, ensure proper framing is added to support the cabinet.
  4. Vložit skříň: Gently slide the cabinet body into the prepared wall opening. Ensure the front flange of the cabinet sits flush against the wall surface.
  5. Bezpečná skříň: Use the provided mounting screws to secure the cabinet to the wall studs or framing through the pre-drilled holes inside the cabinet. Ensure the cabinet is level and plumb before tightening all screws.
  6. Instalace polic: Insert the adjustable shelves into the desired positions using the shelf clips or supports provided.

Návod k obsluze

Opening and Closing the Door:

The Bobrick B-398 features a swing-out door. To open, gently pull the door handle or edge. To close, push the door until it is fully seated and flush with the cabinet frame.

Seřizovací police:

The cabinet includes adjustable shelves. To reposition a shelf, carefully lift it from its current supports, move the supports to the desired height, and then re-insert the shelf. Ensure shelves are securely seated before placing items on them.

Údržba

Čištění skříně:

Inspekce:

Periodically check all mounting screws to ensure they are tight. Inspect hinges for smooth operation and lubricate if necessary with a silicone-based lubricant.

Odstraňování problémů

ProblémMožná příčinaŘešení
Door does not close flush.Špatně zarovnané panty nebo překážka.Check hinges for tightness and alignment. Remove any obstructions.
Cabinet feels loose on wall.Upevňovací šrouby jsou uvolněné.Tighten all mounting screws. Ensure cabinet is properly secured to wall studs/framing.
Shelves are wobbly.Shelves not seated correctly on clips.Ensure shelf clips are fully inserted and shelves are resting securely on them.

Specifikace

Záruka a podpora

For warranty information and customer support, please refer to the official Bobrick webnebo kontaktujte jejich zákaznický servis. Uschovejte si účtenku jako doklad o koupi.

Bobrick Contact Information: