Actiontec My Wireless TV WiFi / HDMI Multi-Room Wireless HD Video Kit (MWTV200KIT-01) User Manual

1. Úvod

The Actiontec My Wireless TV WiFi / HDMI Multi-Room Wireless HD Video Kit (MWTV200KIT-01) provides a solution for wirelessly distributing high-definition video and audio throughout your home. This kit allows you to transmit full 1080p HD and 3D video from an HDMI source device to an HDTV or projector up to 150 feet away, without the need for long HDMI cables. It supports HDCP 2.0 for protected content and includes IR back-channel functionality for controlling your source device remotely.

This manual provides detailed instructions for setting up, operating, and maintaining your My Wireless TV kit, along with troubleshooting tips and product specifications.

2. Co je v krabici

Verify that all components are present in your My Wireless TV kit:

• Wireless HD Video Transmitter
• Wireless HD Video Receiver
• Energy efficient power supplies (x2)
• High-speed HDMI cables (x2)
• Kabel IR Blaster
• Kabel IR přijímače
• Dálkové ovládání
• Průvodce rychlým startem

3. Pokyny k nastavení

Follow these steps to set up your Actiontec My Wireless TV kit:

3.1. Connect the Transmitter

1. Power Off Source Device: Ensure your HDMI source device (e.g., cable box, Blu-ray player) is powered off.
2. Připojte HDMI: Connect one end of an HDMI cable to the HDMI output port of your source device. Connect the other end of the HDMI cable to the HDMI-IN port on the My Wireless TV Transmitter.
3. Připojte napájení: Connect one of the energy-efficient power supplies to the Transmitter's power port and plug it into an electrical outlet.
4. (Optional) HDMI Pass-through: If you wish to connect a local TV to the same source, connect another HDMI cable from the HDMI OUT (pass-through) port on the Transmitter to your local TV's HDMI input.
5. (Optional) IR Blaster: If you intend to control your source device remotely, plug the IR Blaster cable into the IR OUT port on the Transmitter. Position the IR Blaster emitter directly over the IR sensor of your source device.

Obrázek: Zadní view of the Actiontec My Wireless TV Transmitter, showing HDMI In, HDMI Out, IR Out, and power ports.

3.2. Připojte přijímač

1. Power Off Display: Ensure your HDTV or projector is powered off.
2. Připojte HDMI: Connect the second HDMI cable from the HDMI OUT port on the My Wireless TV Receiver to an available HDMI input port on your HDTV or projector.
3. Připojte napájení: Connect the second energy-efficient power supply to the Receiver's power port and plug it into an electrical outlet.
4. (Optional) IR Receiver: If you intend to control your source device remotely, plug the IR Receiver cable into the IR IN port on the Receiver. Position the IR Receiver sensor in a location where it can receive signals from your remote control.

Obrázek: Zadní view of the Actiontec My Wireless TV Receiver, showing HDMI Out, IR In, and power ports.

3.3. Power On and Sync

1. Zapnutí zařízení: Power on your source device, the My Wireless TV Transmitter, the My Wireless TV Receiver, and your HDTV/projector.
2. Vyberte vstup: On your HDTV/projector, select the HDMI input connected to the My Wireless TV Receiver.
3. Automatická synchronizace: The Transmitter and Receiver should automatically establish a wireless connection. The "Wireless" LED indicator on both units will illuminate when a connection is established.
4. Manual Sync (if needed): If the units do not sync automatically, press the "Sync" button on both the Transmitter and Receiver simultaneously for a few seconds until the "Wireless" LED blinks, then becomes solid.
5. Užijte si: Once synced, the video from your source device should appear on your remote display.

4. Provoz

4.1. Viewobsah

After successful setup and syncing, the content from your HDMI source device will be wirelessly transmitted to the connected HDTV or projector. Ensure the remote display is set to the correct HDMI input.

4.2. Remote Control Functionality (IR Back-channel)

The included IR Blaster and IR Receiver cables enable you to control your source device from the remote display location. Point your source device's original remote control at the My Wireless TV Receiver's IR sensor. The signal will be transmitted back to the Transmitter, which then uses the IR Blaster to control your source device.

4.3. On-Screen Control

The My Wireless TV kit features an on-screen control interface. Use the provided remote control to navigate this interface for source switching and accessing advanced features. Refer to the quick start guide for specific remote control button functions.

5. Údržba

• Čištění: Use a soft, dry cloth to clean the surfaces of the Transmitter and Receiver. Do not use liquid cleaners or aerosols.
• Větrání: Ensure that the units have adequate ventilation. Do not block ventilation openings.
• Aktualizace firmwaru: Pravidelně kontrolujte podporu společnosti Actiontec. webweb s aktualizacemi firmwaru pro zajištění optimálního výkonu a kompatibility.
• Cyklus napájení: If experiencing minor issues, power cycling both the Transmitter and Receiver (unplugging and replugging after 10 seconds) can often resolve them.

6. Řešení problémů

This section addresses common issues you might encounter with your My Wireless TV kit.

6.1. No Picture or Signal

• Zkontrolujte připojení: Ensure all HDMI and power cables are securely connected to both the Transmitter and Receiver, and to your source and display devices.
• Correct Input: Verify that your HDTV or projector is set to the correct HDMI input.
• Stav napájení: Confirm that both the Transmitter and Receiver are powered on (power LEDs illuminated).
• Bezdrátová synchronizace: Check the "Wireless" LED on both units. If it's not solid, try pressing the "Sync" button on both units simultaneously.
• Zdrojové zařízení: Ensure your source device is powered on and outputting a signal.
• Rušení: Wireless transmission can be affected by obstacles (walls, furniture) and other wireless devices (Wi-Fi routers, cordless phones). Try repositioning the units or reducing the distance between them.

6.2. Picture Flickering or Intermittent Signal

• Vzdálenost a překážky: The wireless signal strength decreases with distance and when passing through multiple walls or dense materials. Try moving the Receiver closer to the Transmitter or ensuring a clearer line of sight.
• Rušení: Other wireless devices operating on similar frequencies (2.4GHz or 5GHz) can cause interference. Try changing the wireless channel if your units support this feature (check on-screen menu or support documentation).
• Cyklus napájení: Perform a power cycle on both the Transmitter and Receiver.

6.3. Dálkové ovládání nefunguje

• IR Cable Placement: Ensure the IR Blaster emitter is directly over the IR sensor of your source device. The IR Receiver should be positioned to receive signals from your remote.
• Přímá viditelnost: Ensure there is a clear line of sight between your remote control and the IR Receiver.
• Baterie: Check the batteries in your source device's remote control.

6.4. Audio Issues (No Sound or Distorted Audio)

• HDMI připojení: Re-check all HDMI cable connections.
• Display Audio Settings: Verify the audio settings on your HDTV or projector.
• Source Audio Settings: Ensure your source device is outputting audio correctly.

7. Specifikace

8. Záruka a podpora

For technical assistance, warranty information, or to download the latest software and firmware updates, please visit the official Actiontec support webmísto:

www.actiontec.com/support

Please have your product model number (MWTV200KIT-01) and serial number ready when contacting support.