Bezdrátový zvonek Byron BYR301 – návod k obsluze

1. Úvod

Děkuji za nákupasing the Byron BYR301 Wireless Door Chime Kit. This kit provides a convenient and reliable solution for your home or office, featuring a portable chime unit with an optional flashing light and a wireless push button. This manual contains important information regarding the installation, operation, and maintenance of your new door chime kit. Please read these instructions carefully before use and retain them for future reference.

2. Obsah balení

Ujistěte se, že v balení jsou přítomny všechny položky:

• 1 x Portable Chime Unit
• 1 x Bezdrátové tlačítko
• 1 x CR2032 Battery (for Push Button)
• Montážní materiál (šrouby, lepicí podložka)
• Uživatelská příručka

Figure 2.1: Package contents including the chime unit, push button, and packaging.

3. Bezpečnostní informace

• Do not expose the chime unit or push button to extreme temperatures, direct sunlight, or moisture.
• Use only the specified battery types. Incorrect battery types may cause damage or explosion.
• Udržujte baterie mimo dosah dětí. Při požití okamžitě vyhledejte lékařskou pomoc.
• Nepokoušejte se zařízení otevírat ani opravovat sami. Veškerý servis svěřte kvalifikovanému personálu.
• Dispose of old batteries and electronic devices responsibly, following local regulations.

4. Konec produktuview

Familiarize yourself with the components of your Byron BYR301 Wireless Door Chime Kit.

Figure 4.1: Labeled diagram of the portable chime unit and wireless push button.

4.1. Portable Chime Unit Features

• High Quality Speaker: For clear sound output.
• 8 Melodies: Select from a variety of chime sounds.
• Ovládání hlasitosti: Adjust the chime volume (4 levels).
• Blikající světlo: Vizuální upozornění na příchozí návštěvníky.
• Přihrádka na baterie: Requires 3 x C batteries (not included).

4.2. Wireless Push Button Features

• Stiskněte tlačítko: Activates the chime unit.
• Baterie: Napájení 1 x CR2032 baterie (součástí balení).
• Odolné vůči počasí: Vhodné pro venkovní použití.

5. Nastavení

5.1. Installing Batteries in the Chime Unit

1. Locate the battery compartment on the underside of the portable chime unit.
2. Otevřete kryt bateriového prostoru.
3. Insert 3 x C batteries (LR14, not included) according to the polarity markings (+/-) inside the compartment.
4. Bezpečně zavřete kryt bateriového prostoru.

5.2. Installing Battery in the Push Button

1. The CR2032 battery is typically pre-installed. If not, open the push button casing (usually by gently prying it open with a small screwdriver).
2. Vložte baterii CR2032 kladným pólem (+) nahoru.
3. Zavřete casinbezpečně.

Figure 5.1: Wireless Push Button.

5.3. Montáž tlačítka

The push button is designed for outdoor use and can be mounted using screws or the provided adhesive pad.

1. Choose a suitable location near your door, ensuring it is easily accessible to visitors.
2. Použití šroubů: Mark the desired drilling points, drill pilot holes, and secure the push button base with the provided screws. Snap the front cover back on.
3. Using Adhesive Pad: Clean the mounting surface thoroughly. Peel off the protective backing from the adhesive pad and firmly press the push button onto the surface for at least 30 seconds.
4. Ensure the push button is mounted vertically for optimal performance.

Obrázek 5.2: Přample of push button installation.

5.4. Pairing (Automatic Learning)

The Byron BYR301 features automatic learning. Typically, the push button and chime unit are pre-paired at the factory. If they do not connect automatically, or if you are adding another push button, follow these steps:

1. Ensure both the chime unit and push button have fresh batteries installed.
2. Press and hold the pairing button (refer to the chime unit diagram for location, usually a small button or switch) on the chime unit until it emits a short sound or its indicator light flashes.
3. Within 10 seconds, press the wireless push button. The chime unit should sound, indicating successful pairing.
4. Test the connection by pressing the push button. The chime unit should sound.

Figure 5.3: Wireless range illustration (up to 100m in open air).

6. Návod k obsluze

6.1. Změna melodií

Zvonková jednotka nabízí 8 různých melodií. Změna melodie:

• Locate the melody selection button on the chime unit (refer to Figure 4.1).
• Press this button repeatedly to cycle through the available melodies. The chime unit will play each melody as you select it.
• Stop pressing when you hear your desired melody.

6.2. Nastavení hlasitosti

The chime unit has 4 volume levels. To adjust the volume:

• Locate the volume control button on the chime unit (refer to Figure 4.1).
• Press this button repeatedly to cycle through the volume levels (low, medium, high, extra loud).
• Stop pressing when you reach your desired volume level.

6.3. Using the Flashing Light

The chime unit features an optional flashing light for a visual alert.

• The flashing light activates automatically when the chime sounds.
• There is typically no separate control for the flashing light; it operates in conjunction with the chime.

7. Údržba

7.1. Výměna baterie

• Zvonková jednotka: Replace the 3 x C batteries when the chime sound becomes weak or the unit stops functioning. Follow the steps in Section 5.1.
• Stiskněte tlačítko: Replace the CR2032 battery when the chime unit no longer responds to the push button. Follow the steps in Section 5.2.
• Always use fresh, high-quality batteries of the specified type.

7.2. Čištění

• Otřete zvonek a tlačítko měkkým, suchým hadříkem.
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the surfaces.
• Ensure no moisture enters the units during cleaning.

8. Řešení problémů

9. Specifikace

10. Záruka a podpora

For detailed warranty information, please refer to the documentation included with your purchase or visit the official Byron website. If you encounter any issues not covered in the troubleshooting section, please contact Byron customer support for assistance.

• Online podpora: www.byron.com/support (napřampodkaz, prosím ověřte oficiální webweb)
• E-mail: support@byron.com (napřample email, please verify official contact)