Amisco Rocky Kids Twin Platform Bed - Assembly and Care Manual

1. Důležité bezpečnostní informace

Please read all instructions carefully before assembling and using your Amisco Rocky Kids Twin Platform Bed. Keep this manual for future reference.

• Před montáží se ujistěte, že jsou všechny díly přítomny a nepoškozené. Nepoužívejte, pokud některé díly chybí nebo jsou poškozené.
• Assemble the bed on a soft, clean surface to prevent scratching.
• Always use two or more people for assembly to prevent injury.
• Tighten all fasteners securely, but do not overtighten. Periodically check and retighten fasteners as needed.
• Nedovolte dětem hrát si na posteli nebo v jejím okolí během montáže.
• This bed is designed for use with a twin-size mattress.

2. Obsah balení

Verify that all components listed below are included in your package. If any parts are missing, please contact Amisco customer support.

• Čelo postele (1)
• stupačka (1)
• Boční kolejnice (2)
• Bed Slats (Set)
• Hardware Pack (Bolts, Washers, Nuts, Allen Key)

3. Montážní návod

Follow these steps carefully to assemble your Amisco Rocky Kids Twin Platform Bed. It is recommended to have two people for assembly.

Krok 3.1: Připevnění bočnic k čelu postele a nohám postele

1. Vybalte všechny součásti a rozložte je na čistý, měkký povrch.
2. Identify the headboard and footboard. Note the attachment points for the side rails.
3. Align one side rail with the corresponding attachment points on the headboard and footboard.
4. Secure the side rail using the provided bolts, washers, and nuts. Hand-tighten initially.
5. Repeat for the second side rail.
6. Once both side rails are in place, use the Allen key to fully tighten all bolts. Do not overtighten.

Step 3.2: Install Bed Slats and Adjust Height

The Amisco Rocky bed features a variable position bed frame, allowing you to adjust the mattress height to 7'', 9.5'', or 14'' from the floor. This is ideal for platform bed arrangements or to increase under-bed storage.

1. Locate the bed slat supports on the inside of the side rails. These supports will have multiple pre-drilled holes for height adjustment.
2. Decide on your desired bed height:
   • 7 palců: Lowest position, suitable for a mattress only.
   • 9.5 palců: Mid-level position.
   • 14 palců: Highest position, maximizing under-bed storage.
3. Insert the bed slats into the chosen height position on the side rail supports. Ensure they are evenly spaced and securely seated.
4. If your slats require fastening, use the provided hardware to secure them to the side rails.

Figure 1: Fully assembled Amisco Rocky Kids Twin Platform Bed. This image displays the sturdy metal construction and classic design, illustrating the platform base ready for a mattress.

4. Návod k obsluze (Nastavení výšky)

The Amisco Rocky bed allows for easy adjustment of the mattress support height. To change the height:

1. Remove the mattress and any bedding from the bed frame.
2. Carefully lift and remove the bed slats from their current position.
3. Re-insert the bed slats into the desired height setting (7'', 9.5'', or 14'') on the side rail supports. Ensure all slats are securely seated and evenly distributed.
4. Replace the mattress and bedding.

Pozor: Always remove the mattress before adjusting slat height. Ensure slats are fully secured in their new position before placing the mattress back on the frame.

5. Údržba a péče

To ensure the longevity and appearance of your Amisco Rocky Kids Twin Platform Bed, follow these care guidelines:

• Čištění: Otřete kovový rám měkkým hadříkemamp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the baked powder coating.
• Ochrana povrchové úpravy: The bed features a nontoxic, environmentally safe baked powder coating designed for scratch resistance. While durable, avoid sharp objects that could scratch the finish.
• Kontrola upevňovacích prvků: Periodically (every 3-6 months) check all bolts and fasteners to ensure they are tight. Retighten if necessary to maintain stability.
• Hnutí: When moving the bed, lift it rather than dragging it to prevent stress on the frame and potential floor damage.

6. Řešení problémů

If you encounter any issues with your Amisco Rocky Kids Twin Platform Bed, refer to the following common solutions:

• Postel se kymácí: Check all bolts and fasteners. Ensure they are securely tightened. If the bed was recently moved, re-check all connections.
• Vrzavé zvuky: Squeaking can often be resolved by tightening all frame bolts. If the issue persists, ensure the bed slats are properly seated and not rubbing against the frame. Applying a small amount of lubricant (e.g., silicone spray) to contact points between slats and frame can sometimes help, but ensure it is safe for the finish.
• Obtížnost nastavení výšky: Ensure the mattress and bedding are removed before attempting to adjust slat height. Verify that the slats are not jammed and are being inserted into the correct pre-drilled holes.
• Chybějící části: If you discover missing parts during assembly, do not proceed. Contact Amisco customer support immediately for assistance.

7. Specifikace

8. Informace o záruce

Amisco products are manufactured with high-quality materials and craftsmanship. Specific warranty details, including coverage period and terms, are typically provided with your product at the time of purchase or can be found on the official Amisco webstránky. Uschovejte si prosím doklad o koupi pro případ reklamace.

Podrobné informace o záruce naleznete na Amisco Official Store nebo kontaktujte přímo jejich zákaznický servis.

9. Zákaznická podpora

If you have any questions, require assistance with assembly, or need to report missing/damaged parts, please contact Amisco customer support.

You can often find contact information on the Amisco webwebu nebo prostřednictvím prodejce, u kterého jste produkt zakoupili.

Pro více informací navštivte Amisco Official Store on Amazon.