Targus TGT-BK58T

Targus TGT-BK58T 58-Inch 3-Way Panhead Tripod Instruction Manual

Model: TGT-BK58T

Zavedení

This manual provides instructions for the proper setup, operation, and maintenance of your Targus TGT-BK58T 58-Inch 3-Way Panhead Tripod. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

The Targus TGT-BK58T tripod is designed to provide stable support for cameras and camcorders, featuring a 3-way fluid panhead, quick-release plate, and quick-release leg locks for ease of use. It extends to a maximum height of 58 inches and folds to 23 inches for portability.

Obsah balení

  • Targus TGT-BK58T 58-Inch 3-Way Panhead Tripod
  • Quick-Release Plate (pre-attached or separate)
  • Přepravní pouzdro

Nastavení

1. Rozložení stativu

  1. Remove the tripod from its carrying case.
  2. Gently spread the tripod legs outwards until they are fully extended or at your desired angle.
  3. To extend the legs, open the quick-release leg locks on each section. Pull the leg sections to the desired height and then close the quick-release leg locks firmly to secure them.

2. Připojení fotoaparátu/videokamery

The tripod features a quick-release plate for easy attachment and detachment of your device.

  1. Locate the quick-release plate on the panhead. If it's attached, release the locking mechanism (usually a lever or knob) and slide the plate off.
  2. Screw the quick-release plate onto the tripod mounting thread on the bottom of your camera or camcorder. Ensure it is securely tightened.
  3. Slide the camera with the attached quick-release plate back into the panhead receiver until it clicks or locks into place. Secure the locking mechanism.
Targus TGT-BK58T Tripod with camera attached

Image: Targus TGT-BK58T 58-Inch 3-Way Panhead Tripod. This image shows the tripod fully extended with a camera mounted on the panhead, illustrating its typical use.

Návod k obsluze

1. Adjusting Height and Stability

  • Prodloužení nohou: Use the quick-release leg locks to adjust the height of each leg section independently. Ensure all locks are securely fastened before use.
  • Středový sloupec: The center column can be raised or lowered for additional height adjustment. Loosen the center column lock knob, adjust the column, and then tighten the knob firmly.
  • Úroveň bublin: Utilize the integrated bubble level on the panhead to ensure your tripod is perfectly level for straight horizons and stable shots. Adjust leg lengths as needed to achieve level.

2. Using the 3-Way Panhead

The 3-way fluid panhead allows for precise adjustments in three directions: pan (horizontal), tilt (vertical), and portrait/landscape orientation.

  • Nastavení pánve: Loosen the pan lock knob (usually at the base of the panhead) to rotate the camera horizontally. Tighten to secure.
  • Nastavení sklonu: Loosen the tilt lock knob (often on the side of the panhead) to adjust the camera's vertical angle. Tighten to secure.
  • Úprava na výšku/na šířku: A separate knob or lever allows for tilting the camera 90 degrees for portrait orientation. Loosen, adjust, and tighten.
  • Rukojeť pánve: Use the pan handle for smooth and controlled movements during video recording or precise framing.

Údržba

  • Čištění: Po každém použití otřete stativ měkkým, suchým hadříkem, abyste odstranili prach a nečistoty. Na odolnou špínu použijte lehceamp hadříkem a poté důkladně osušte. Vyhněte se agresivním chemikáliím.
  • Skladování: Store the tripod in its carrying case in a cool, dry place away from direct sunlight and extreme temperatures.
  • Mazání: Moving parts, such as leg locks and panhead mechanisms, generally do not require lubrication. If movement becomes stiff, consult a professional or the manufacturer's support.
  • Inspekce: Pravidelně kontrolujte všechny šrouby, knoflíky a pojistky nohou, zda jsou utažené a správně fungují. Nepřetahujte je.

Odstraňování problémů

ProblémMožná příčinaŘešení
Stativ je nestabilní.Leg locks not fully secured; uneven surface; weight limit exceeded.Ensure all leg locks are firmly closed. Adjust leg lengths to level the tripod using the bubble level. Verify camera/camcorder weight does not exceed 5 pounds.
Fotoaparát není bezpečně připevněn.Quick-release plate not tightened to camera; quick-release plate not locked into panhead.Ensure the quick-release plate is tightly screwed onto your device. Confirm the quick-release plate is fully inserted and locked into the panhead mechanism.
Panhead movement is stiff or loose.Locking knobs are too tight or too loose; dirt in mechanism.Adjust the pan and tilt locking knobs to the desired tension. Clean the panhead area. If issues persist, contact support.

Specifikace

Číslo modeluTGT-BK58T
ZnačkaTargus
Maximální výška58 palce (147.3 cm)
Výška ve složeném stavu23 palce (58.4 cm)
Hmotnost položky2.5 liber (1.13 kg)
Hmotnostní limit5 liber (2.27 kg)
Typ hlavy3-Way Fluid Panhead
MateriálHliník
Kompatibilní zařízeníCamcorder, Camera
Speciální funkceAdjustable, Quick-Release Plate, Quick-Release Leg Locks, Dual Bubble Level

Záruka a podpora

For warranty information or technical support, please refer to the warranty card included with your product or visit the official Targus webUschovejte si účtenku jako doklad o koupi pro případ reklamace.

Poznámka: Záruční podmínky se mohou lišit v závislosti na regionu.

© 2023 Targus. Všechna práva vyhrazena.

Tato příručka se může změnit bez předchozího upozornění.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.