Zavedení
The Savio BF500 Black Foam Cartridge is designed for sealing and filling gaps in pond and water feature applications. This black-colored foam blends naturally with rocks and liners, providing a waterproof seal. It is suitable for securing rocks, diverting water flow, and sealing cracks or crevices in aquatic environments. This product requires a gun foam applicator, which is sold separately.
Bezpečnostní informace
- Always wear appropriate personal protective equipment, including safety glasses and chemical-resistant gloves, during application.
- Ensure adequate ventilation in the work area to avoid inhaling vapors.
- Uchovávejte mimo dosah dětí a domácích zvířat.
- This product is flammable. Keep away from heat, sparks, open flames, and hot surfaces. No smoking.
- Avoid skin and eye contact. In case of contact, rinse immediately with plenty of water and seek medical advice.
- Dispose of empty cartridges and cured foam according to local regulations.
Nastavení
- Připravte povrch: Ensure the application surface is clean, dry, and free of loose debris, oil, or grease. Lightly misting the surface with water can improve adhesion and aid in curing.
- Připojte aplikátor: Screw the Savio BF500 cartridge firmly onto a compatible gun foam applicator (sold separately). Ensure a tight seal to prevent leakage.
- Dobře protřepat: Shake the cartridge vigorously for at least 30 seconds before use to ensure proper mixing of contents. Repeat shaking periodically during application.
- Test Application: Before applying to the desired area, dispense a small amount of foam onto a scrap surface to ensure proper flow and expansion.
Návod k obsluze
The Savio BF500 Black Foam expands slowly, allowing for controlled application and filling of voids. Its black color helps it blend seamlessly with natural pond environments.
- Aplikace: Hold the applicator gun with the cartridge inverted (valve down) during application. Apply foam into gaps, cracks, or around rocks where sealing is required. Fill voids approximately 30-50% as the foam will expand significantly.
- Řízení toku: Adjust the trigger on the gun foam applicator to control the flow rate of the foam. Apply in a steady, even bead.
- Expansion and Curing: The foam will begin to expand and cure upon contact with moisture in the air and on the surface. Full cure time can vary depending on temperature, humidity, and foam thickness, but typically takes several hours. Avoid disturbing the foam during the curing process.
- Trimming (Optional): Once fully cured, excess foam can be carefully trimmed with a utility knife if necessary.
Údržba
Proper maintenance of your gun foam applicator is crucial for its longevity and effective use with Savio BF500 cartridges.
- Applicator Cleaning: After each use, immediately clean the gun foam applicator with a compatible foam gun cleaner. Follow the cleaner manufacturer's instructions. Failure to clean the applicator promptly can lead to cured foam blocking the mechanism.
- Cartridge Storage: Store unused cartridges in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure the valve is clean and free of cured foam before storage.
Odstraňování problémů
| Problém | Možná příčina | Řešení |
|---|---|---|
| Foam does not dispense or dispenses poorly. | Cartridge not shaken sufficiently; applicator gun clogged; cartridge too cold; valve blocked. | Shake cartridge vigorously. Clean applicator gun thoroughly. Warm cartridge to room temperature. Check and clear any blockage around the valve. |
| Foam expands unevenly or cures slowly. | Insufficient moisture on surface; low humidity; improper mixing. | Lightly mist the application surface with water. Ensure adequate ventilation and humidity. Shake cartridge well before and during use. |
| Can runs out of propellant before foam is fully dispensed. | Improper storage; can used in incorrect orientation (not inverted). | Store cartridges in a cool, dry place. Always use the applicator gun with the cartridge inverted (valve down) to ensure propellant is utilized efficiently. |
Specifikace
- Název produktu: Savio Black Foam Cartridge
- Model: BF500
- Objem: 24 ml (balení po 1 ks)
- Barva: Černý
- Aplikace: Requires gun foam applicator (sold separately)
- Rozměry balení: 10.6 x 2.3 x 2.2 palce
- Hmotnost položky: 2 libry
- Výrobce: Savio Engineering
- ASIN: B004VM9ESW
Záruka a podpora
For warranty information, technical support, or any product-related inquiries, please contact Savio Engineering customer service directly. Refer to the product packaging or the official Savio webstránky s aktuálními kontaktními údaji.
Savio Official Webmísto: Visit the Savio Store on Amazon
